Menu
-
BackX
-
Components
-
-
Category
-
Semiconductors
- Diodes
- Thyristors
-
Electro-insulated Modules
- Electro-insulated Modules | VISHAY (IR)
- Electro-insulated Modules | INFINEON (EUPEC)
- Electro-insulated Modules | Semikron
- Electro-insulated Modules | POWEREX
- Electro-insulated Modules | IXYS
- Electro-insulated Modules | POSEICO
- Electro-insulated Modules | ABB
- Electro-insulated Modules | TECHSEM
- Go to the subcategory
- Bridge Rectifiers
-
Transistors
- Transistors | GeneSiC
- SiC MOSFET Modules | Mitsubishi
- SiC MOSFET Modules | STARPOWER
- Module SiC MOSFET ABB’s
- IGBT Modules | MITSUBISHI
- Transistor Modules | MITSUBISHI
- MOSFET Modules | MITSUBISHI
- Transistor Modules | ABB
- IGBT Modules | POWEREX
- IGBT Modules | INFINEON (EUPEC)
- Silicon Carbide (SiC) semiconductor elements
- Go to the subcategory
- Gate Drivers
- Power Blocks
- Go to the subcategory
-
Electrical Transducers
-
Current Transducers | LEM
- Closed-Loop Current Transducers (C/L)
- Open-Loop Current Transducers (O/L)
- Current Transducers supplied with unipolar voltage
- 'Eta' Current Transducers
- Current Transducers - LF xx10 Series
- Current Transducers - LH Series
- Current Transducer - HOYL and HOYS Series
- Current Transducers - GO–SME & GO–SMS Series
- AUTOMOTIVE current transducers
- Go to the subcategory
-
Voltage Transducers | LEM
- Voltage Transducers - LV Series
- Voltage Transducers - DVL Series
- Precision Voltage Transducers with double magnetic core - CV Series
- Voltage Transducer for Traction - DV 4200/SP4
- Voltage Transducers - DVM Series
- Voltage Transducer - DVC 1000-P
- Voltage Transducers - DVC 1000 Series
- Go to the subcategory
- Transducers for Protection, Monitoring and Control | LEM
- Split-core Transducers | LEM
- Precision Current Transducers | LEM
- Go to the subcategory
-
Current Transducers | LEM
-
Passive components (capacitors, resistors, fuses, filters)
- Resistors
-
Fuses
- Miniature Fuses for electronic circuits - ABC & AGC Series
- Tubular Fast-acting Fuses
- Time-delay Fuse Links with GL/GG & AM characteristics
- Ultrafast Fuse Links
- Fast-acting Fuses (British & American standard)
- Fast-acting Fuses (European standard)
- Traction Fuses
- High-voltage Fuse Links
- Go to the subcategory
- Capacitors
- EMI Filters
- Supercapacitors
- Power surge protection
- Go to the subcategory
-
Relays and Contactors
- Relays and Contactors - Theory
- 3-Phase AC Semiconductor Relays
- DC Semiconductor Relays
- Controllers, Control Systems and Accessories
- Soft Starters and Reversible Relays
- Electromechanical Relays
- Contactors
- Rotary Switches
-
Single-Phase AC Semiconductor Relays
- AC ONE PHASE RELAYS 1 series| D2425 | D2450
- One phase semiconductor AC relays CWA and CWD series
- One phase semiconductor AC relays CMRA and CMRD series
- One phase semiconductor AC relays - PS series
- Double and quadruple semiconductor AC relays - D24 D, TD24 Q, H12D48 D series
- One phase semiconductor relays - gn series
- Ckr series single phase solid state relays
- One phase AC semiconductor relays for DIN bus - ERDA I ERAA series
- 150A AC single phase relays
- Rail Mountable Solid State Relays With Integrated Heat Sink - ENDA, ERDA1 / ERAA1 series
- Go to the subcategory
- Single-Phase AC Semiconductor Relays for PCBs
- Interface Relays
- Go to the subcategory
- Cores and Other Inductive Components
- Heatsinks, Varistors, Thermal Protection
- Fans
- Air Conditioning, Accessories for Electrical Cabinets, Coolers
-
Batteries, Chargers, Buffer Power Supplies and Inverters
- Batteries, Chargers - Theoretical Description
- Modular Li-ion Battery Building Blocks, Custom Batteries, BMS
- Batteries
- Battery Chargers and Accessories
- Uninterruptible Power Supply and Buffer Power Supplies
- Inverters and Photovoltaic Equipments
- Energy storage
- Fuel cells
- Lithium-ion batteries
- Go to the subcategory
-
Automatics
- Limit Switches, Microswitches
- Sensors, Transducers
-
Infrared Thermometers (Pyrometers)
- IR-TE Series - Water-proof Palm-sized Radiation Thermometer
- IR-TA Series - Handheld Type Radiation Thermometer
- IR-H Series - Handheld Type Radiation Thermometer
- IR-BA Series - High-speed Compact Radiation Thermometer
- IR-FA Series - Fiber Optic Radiation Thermometer
- IR-BZ Series - Compact Infrared Thermometers
- Go to the subcategory
- Counters, Time Relays, Panel Meters
- Industrial Protection Devices
- Light and Sound Signalling
- Thermographic Camera
- LED Displays
- Control Equipments
-
Recorders
- Hybrid Recorders - AL3000 Series | CHINO
- Graphic Recorder - KR2000 Series | CHINO
- Ubiquitous Recorders - KR5000 Series | CHINO
- Palm-sized Temperature/Humidity Meters - HN-CH Series | CHINO
- Consumables for Recorders
- 71VR1 - Compact Paperless Recorder | M-SYSTEM
- Graphic Recorder - KR3000 Series | CHINO
- PC Recorders - R1M Series | M-SYSTEM
- PC Recorders - R2M Series | M-SYSTEM
- PC Recorders - RZMS Series | M-SYSTEM
- PC Recorders - RZUS Series | M-SYSTEM
- Go to the subcategory
- Drivers and Panels
- Go to the subcategory
-
Cables, Litz wires, Conduits, Flexible connections
- Wires
- Litz wires
- Cables for extreme applications
- Sleevings
-
Braids
- Flat Braids
- Round Braids
- Very Flexible Flat Braids
- Very Flexible Round Braids
- Cylindrical Cooper Braids
- Cylindrical Cooper Braids and Sleevings
- Flexible Earthing Connections
- Galvanized and Stainless Steel Cylindrical Braids
- PCV Insulated Copper Braids (temp. up to 85C)
- Flat Aluminium Braids
- Junction Set - Braids and Tubes
- Go to the subcategory
- Traction Equipment
- Cable Terminals
- Flexible Insulated Busbars
- Flexible Multilayer Busbars
- Cable Duct Systems
- Hoses
- Go to the subcategory
- View all categories
-
Semiconductors
-
-
- Suppliers
-
Applications
- CNC Machine Tools
- DC and AC Drives (Inverters)
- Energetics
- Equipment and Components for Hazardous Areas [Ex]
- Equipment for Distribution, Control and Telecommunications Cabinets
- HVAC Automation
- Induction Heating
- Industrial Automation
- Industrial Protective Devices
- Machines for Drying and Wood Processing
- Machines for Thermoforming Plastics
- Mining, Metallurgy and Foundry
- Motors and Transformers
- Power Supplies (UPS) and Rectifier Systems
- Printing
- Temperature Measurement and Regulation
- Test and Laboratory Measurements
- Tram and Railway Traction
- Welding Machines
-
Assembly
-
-
Montaż urządzeń
- Assembly of equipment on request
- Designing and Assembling of Busbar Cabinets, Switching Cabinets, Power Cabinets
- Power systems installation
- Power Electronics Equipment
- Machines built for order
- R&D research and development work
-
Industrial Testers
- Tester for diodes and thyristors measurement
- Thermal and motor circuit breakers testing stand
- Varistors and surge protectors testers
- Car fuses testing stand
- Tester for the power diode and thyristor reverse recovery charge Qrr measurement
- Rotor tester FD series
- Circuit breakers tester
- Tester for calibrating relays
- Video inspection tester for gas spring piston rods
- High-current thyristor switch
- Mesh ripping tester
- Go to the subcategory
- View all categories
-
-
-
Inductors
-
-
Modernizacja induktorów
- Repair of used inductors
- Modernization of inductors
-
Production of new inductors
- Inductors for crankshaft hardening
- Hardening of band saw teeth
- Inductors for heating elements before gluing
- Hardening of raceways of automotive wheel hub bearings
- Hardening of the drive transmission components
- Hardening of stepped shafts
- Heating in contraction joints
- Induction for scanning hardening
- Soft soldering
- Billet heaters
- Go to the subcategory
- Knowledge base
- View all categories
-
-
-
Induction devices
-
-
Urządzenia indukcyjne
-
Induction heating generators
-
Induction Heating Products Ambrell
- Generators power 500 W, frequency 150 - 400 kHz
- Generators power 1.2 - 2.4 kW, frequency 150 - 400 kHz
- Generators power 4.2 - 10 kW, frequency 150 - 400 kHz
- Generators power 10-15 kW, frequency 50-150 kHz
- Generators power 30-45 kW, frequency 50-150 kHz
- Generators power 65-135 kW, frequency 50-150 kHz
- Generators power 180-270 kW, frequency 50-150 kHz
- Generators power 20-35-50 kW, frequency 15-45 kHz
- Generators power 75-150 kW, frequency 15-45 kHz
- Generators power 200-500 kW, frequency 15-45 kHz
- Generators power 20-50 kW, frequency 5-15 kHz
- Go to the subcategory
- Induction heating products Denki Kogyo
-
JKZ induction heating generators
- Generators CX, frequency: 50-120kHz, power: 5-25kW
- Generators SWS, frequency: 15-30kHz, power: 25-260kW
- Molding and forging furnaces MFS, frequency: 0,5-10kHz, power: 80-500kW
- Melting metals furnaces MFS, frequency: 0,5-10kHz, power: 70-200kW
- Generators UHT, frequency: 200-400kHz, power: 10-160kW
- Go to the subcategory
- Lamp generators for induction heating
- Induction Heating Products - Himmelwerk
- Go to the subcategory
-
Induction Heating Products Ambrell
- Repairs and modernization
- Peripherals
-
Applications
- Medical Applications with Precision Induction Heating
- Applications for automotive industry
- Soldering
- Brazing
- Aluminum Brazing
- Brazing a magnetic steel cutting tool
- Pin Sealing
- Atmospheric Brazing
- Soldering brass and steel radiator caps
- Carbide Tipping
- Soldering a copper lug and a wire
- Go to the subcategory
- Knowledge base
- View all categories
-
Induction heating generators
-
-
-
Service
-
- Contact
- Zobacz wszystkie kategorie
Photos are for informational purposes only. View product specification
please use latin characters
More performance [&] Quality in less space
• Current vector control
• High starting torque (200% / 0.5 Hz)
• 1:100 speed control range
• Double rating ND 120%/1min and HD 150%/1 min
• IM[&]PM motor control
• Online Tuning
• Low-noise Low carrier technology
• 10 years lifetime design
• Built-in filter
• Screw-less terminals
• Control Terminals with memory backup
• 24 VDC control board power supply option
• Fieldbus communications: Modbus, Profibus, CanOpen, DeviceNet, Lonworks, CompoNet, Ethernet, ML-II
• Safety embedded: EN954-1 safety cat. 3, EN6158 SIL II and EN60204-1 Stop category 0
• CE, UL, cUL and TUV
• Current vector control
• High starting torque (200% / 0.5 Hz)
• 1:100 speed control range
• Double rating ND 120%/1min and HD 150%/1 min
• IM[&]PM motor control
• Online Tuning
• Low-noise Low carrier technology
• 10 years lifetime design
• Built-in filter
• Screw-less terminals
• Control Terminals with memory backup
• 24 VDC control board power supply option
• Fieldbus communications: Modbus, Profibus, CanOpen, DeviceNet, Lonworks, CompoNet, Ethernet, ML-II
• Safety embedded: EN954-1 safety cat. 3, EN6158 SIL II and EN60204-1 Stop category 0
• CE, UL, cUL and TUV
Ratings
• 200 V Class single-phase 0.1 to 4 kW
• 200 V Class three-phase 0.1 to 15 kW
• 400 V Class three-phase 0.2 to 15 kW
Specifications
Type designation
V | V1000 series |
Z |
Z: European standard
specifications |
A |
A: Standard specs
|
B |
Voltage:
B: Single-phase 200 VAC 2: Three-phase 200 VAC 4: Three-phase 400 VAC |
O P 1 |
[”P” indicates a decimal point]
Max. applicable motor output 0P1: 0.1 kW ~ 015: 15 kW |
B |
Enclosure, Fin, Filter:
B: IP20 without top cover F: Nema 1 E: IP20 without top cover and C3 filter |
A |
Coating specs:
A: Standard |
A | Version |
200 V class
Single-phase:: VZ-@ | B0P1 | B0P2 | B0P4 | B0P7 | B1P5 | B2P2 | B4P0 | - | - | - | - | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Three-phase: VZ-@ | 20P1 | 20P2 | 20P4 | 20P7 | 21P5 | 22P2 | 24P0 | 25P5 | 27P5 | 2011 | 2015 | |
Motor [ kW]1 | For HD setting | 0,12 | 0,25 | 0,4 | 0,75 | 1,5 | 2,2 | 4,0 | 5,5 | 7,5 | 11 | 15 |
For ND setting | 0,18 | 0,37 | 0,75 | 1,1 | 2,2 | 3,0 | 5,5 | 7,5 | 11 | 15 | 18,5 | |
Output characteristics |
Inverter capacity kVA | 0,3 | 0,6 | 1,1 | 1,9 | 3,0 | 4,2 | 6,7 | 9,5 | 13 | 18 | 23 |
Rated output current (A) at HD | 0,8 | 1,6 | 3,0 | 5,0 | 8,0 | 11,0 | 17,5 | 25,0 | 33,0 | 47,0 | 60,0 | |
Rated output current (A) at ND | 1,2 | 1,9 | 3,5 | 6,0 | 9,6 | 12,0 | 21,0 | 30,0 | 40,0 | 56,0 | 69,0 | |
Max. output voltage | Proportional to input voltage: 0..240 V | |||||||||||
Max. output frequency | 400 Hz | |||||||||||
Power supply |
Rated input voltage and frequency |
Single-phase 200..240 V 50/60 Hz 3-phase 200..240 V 50/60 Hz |
||||||||||
Allowable voltage fluctuation |
-15% - +10% | |||||||||||
Allowable frequency fluctuation |
+5% |
1) Based on a standard 4-pole motor for maximum applicable motor output:
Heavy Duty (HD) mode with a 150% overload capacity
Normal Duty (ND) mode with a 120% overlaod capacity
400 V class
Three-phase: VZ-@ | 40P2 | 40P4 | 40P7 | 41P5 | 42P2 | 43PO | 44P0 | 45P5 | 47P5 | 4011 | 4015 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Motor [ kW]1 | For HD setting | 0,2 | 0,4 | 0,75 | 1,5 | 2,2 | 3,0 | 4,0 | 5,5 | 7,5 | 11 | 15 |
For ND setting | 0,37 | 0,75 | 1,5 | 2,2 | 3,0 | 3,7 | 5,5 | 7,5 | 11 | 15 | 18,5 | |
Output characteristics |
Inverter capacity [kVA] | 0,9 | 1,4 | 2,6 | 3,7 | 4,2 | 5,5 | 7,2 | 9,2 | 14,8 | 18 | 24 |
Rated output current (A) at HD | 1,2 | 1,8 | 3,4 | 4,8 | 5,5 | 7,2 | 9,2 | 14,8 | 18 | 24 | 31 | |
Rated output current (A) at ND | 1,2 | 2,1 | 4,1 | 5,4 | 6,9 | 8,8 | 11,1 | 17,5 | 23 | 31 | 38 | |
Max. output voltage | 0..480V (proportional to input voltage) | |||||||||||
Max. output frequency | 400 Hz | |||||||||||
Power supply |
Rated input voltage and frequency |
3-phase 380..480 VAC, 50/60 Hz | ||||||||||
Allowable voltage fluctuation |
-15% do +10% | |||||||||||
Allowable frequency fluctuation |
+5% |
Heavy Duty (HD) mode with a 150% overload capacity
Normal Duty (ND) mode with a 120% overlaod capacity.
Model number VZ-D | Specifications | |
---|---|---|
Control functions | Control methods Sine wave PWM (V/f control, sensorless current vector control) | |
Output frequency range | 0,1-400 Hz | |
Frequency tolerance | Digital set value: ±0.01% (-10..+50 ºC) | |
Analogue set value: ±0.1% (25 ±10 ºC) | ||
Resolution of frequency set value | Digital set value: 0.01 Hz (<100 Hz), 0.1 Hz (>100 Hz) | |
Analogue set value: 1/1000 of maximum frequency | ||
Resolution of output frequency 0.01 Hz | 0,01 Hz | |
Overload capability | Heavy duty use: 150% rated output current for one minute Normal duty use: 120% rated output current for one minute |
|
Frequency set value | 0..10 V (20 kΩ), 4..20 mA (250 Ω), 0..20 mA (250 Ω) Pulse train input, frequency setting value (selectable) |
|
Braking torque (short term peak torque) |
Short-term average deceleration torque: 150% (up 1.5 kW), 100% (for 1.5 kW), 50% (for 2.2 kW), 20% (fof bigger size) Continous regenerative torque: Aprox 20% (125% with optional braking resistor, 10%ED, 10 s, braking transistor built itn) |
|
V/f Characteristics | Possible to program any V/f pattern | |
Inputs signals | Seven of the following input signals are selectable: Forward/reverse run (3-wire sequence), fault reset, external fault (NO/NC contact input), multi-step speed operation, Jog command, accel/decel time select, external baseblock, speed search command, UP/DOWN command, accel/decel hold command, LOCAL/REMOTE selection, communication/control circuit terminal selection, mergency stop fault, emergency stop alarm, self test |
|
Output signals | Following output signals are selectable (NO/NC contact output, 2 photo-coupler outputs): Fault, running, zero speed, speed agree, frequency detection (output frequency <= or => set value), during overtorque detection, minor error, during baseblock, operation mode, inverter run ready, during fault retry, during undervoltage detection, reverse running, during speed search, data output through communication. |
|
Standard functions | Open-loop vector control, full-range automatic torque boost, slip compensation, 17-step speed operation (max.), restart after momentary power loss, DC injection braking current at stop/start (50% of inverter rated current, 0.5 sec, or less), frequency reference bias/gain, MEMOBUS communications (RS-485/422, max. 115K bps), fault retry, speed search, frequency upper/ lower limit setting, overtorque detection, frequency jump, accel/decel time switch, accel/decel prohibited, S-curve accel/decel, PID control, energy-saving control, constant copy. |
|
Analogue inputs | 2 analogue inputs, 0..10 V, 4..20 mA, 0..20 mA | |
Braking/acceleration times 0.01..6000 s | ||
Display | Optionally frequency, current or set value | |
Error and status LED | ||
Motor overload protection Electronic thermal overload relay | ||
Instantaneous overcurrent | Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class) | |
Overload | Heavy Duty: Motor coasts to a stop after 1 minute at 150% of inverter rated output current Normal Duty: Motor coasts to a stop after 1 minute at 120% of inverter rated output current |
|
Overvoltage | Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class) | |
Undervoltage | Stops when DC bus voltage is approx. 190 V or less (double for 400 V class) (approx. 150 V or less for single-phase series) |
|
Momentary power loss | Following items are selectable: not provided (stop if power loss is 15 ms or longer), continuous operation if power loss is approx. 0.5 s or shorter, continuous operation |
|
Cooling fin overheat | Protected by thermister | |
Stall prevention level | Stall prevention level Stall prevention during acceleration/deceleration and constant speed operation | |
Ground fault | Protected by electronic circuit (operation level is approx. 250% of rated output current) | |
Power charge indication | Indicates until the main circuit voltage reaches 50 V. | |
Degree of protection | IP20, NEMA1 | |
Cooling | Cooling fan is provided for 200 V, 0.75 kW (1HP) (3/single-phase) 400 V, 1.5 kW (2HP) (3-phase), others are self-cooling |
|
Ambient humidity | 95% RH or less (without condensation) | |
Storage temperature | -20 ºC..+60 ºC (short-term temperature during transportation) | |
Installation | Indoor (no corrosive gas, dust, etc.) | |
Installation height Max. 1000 m | Maks. 1000 m | |
Vibration | Up to 9.8 m/s2 at 10 to less than 20 Hz, Up to 6.37 m/s2 at 20 to 50 Hz |
Dimensions
IP 20 type 0,1 do 4 kW
Drawing 1
|
Drawing 2
|
Voltage class | Max. applicable motor output kW [kW] |
Inverter model VZA | Drawing | Dimensions in mm | Masa | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
W1 | H1 | W | H | D | tl | H2 | D1 | H3 | H4 | |||||
Single-phase 200 V |
0,12 | B0P1 | 1 | 56 | 118 | 68 | 128 | 76 | 3 | 5 | 6,5 | 0,6 | ||
0,25 | B0P2 | 0,7 | ||||||||||||
0,55 | B0P4 | 108 | 5 | 38,5 | 1,0 | |||||||||
1,1 | B0P7 | 2 | 96 | 108 | 137,5 | 58 | 1,5 | |||||||
1 5 | B1P5 | 154 | 1 5 | |||||||||||
2,2 | B2P2 | 128 | 140 | 163 | 65 | 2,1 | ||||||||
4,0 | B4P0 | W trakcie opracowania | ||||||||||||
Three-phase 200V |
0,12 | 30P1 | 1 | 56 | 118 | 68 | 128 | 76 | 3 | 5 | 6,5 | - | - | 06 |
0,25 | 20P2 | 0,6 | ||||||||||||
0,55 | 20P4 | 108 | 5 | 38,5 | 0,9 | |||||||||
1 1 | 30P7 | 128 | 1 1 | |||||||||||
1,5 | 21P5 | 2 | 96 | 108 | 129 | 58 | 1,3 | |||||||
2,2 | 22P2 | 137,5 | 1,4 | |||||||||||
40 | 34P0 | 128 | 140 | 143 | 65 | 2,1 | ||||||||
5,5 | 25P5 | 3 | 122 | 248 | 140 | 254 | 140 | - | 6 | 55 | 13 | 6,2 | 3,0 | |
7,5 | 27P5 | 3,8 | ||||||||||||
11 | 9011 | 160 | 284 | 180 | 290 | 163 | 8 | 75 | 15 | 5,5 | ||||
15 | 2015 | 192 | 336 | 220 | 358 | 187 | 7 | 78 | ' | 9,2 | ||||
Three-phase 400V |
0,37 | 40P2 | 2 | 96 | 118 | 108 | 128 | 81 | 5 | 5 | 10 | - | 0,8 | |
0,55 | 40P4 | 99 | 78 | 1 0 | ||||||||||
1,1 | 40P4 | 137,5 | 58 | 1,4 | ||||||||||
1,5 | 41P5 | 154 | 1,5 | |||||||||||
3 3 | 43P3 | 1 5 | ||||||||||||
3,0 | 43P0 | 1,5 | ||||||||||||
4,0 | 44P0 | 128 | 140 | 143 | 65 | 2,1 | ||||||||
5,5 | 45P5 | 3 | 122 | 248 | 140 | 254 | 140 | " | 6 | 55 | 13 | 6 | 3,8 | |
7,5 | 47P5 | 6,2 | 3,8 | |||||||||||
11 | 4011 | 160 | 284 | 180 | 290 | 143 | 8 | 15 | 6 | 5,2 | ||||
15 | 4015 | 163 | 75 | 5,5 |
V1000 + Option board (Communication and 24V DC power supply)
Send an inquiry
Are you interested in this product? Do you need additional information or individual pricing?
Contact us
More performance [&] Quality in less space
• Current vector control
• High starting torque (200% / 0.5 Hz)
• 1:100 speed control range
• Double rating ND 120%/1min and HD 150%/1 min
• IM[&]PM motor control
• Online Tuning
• Low-noise Low carrier technology
• 10 years lifetime design
• Built-in filter
• Screw-less terminals
• Control Terminals with memory backup
• 24 VDC control board power supply option
• Fieldbus communications: Modbus, Profibus, CanOpen, DeviceNet, Lonworks, CompoNet, Ethernet, ML-II
• Safety embedded: EN954-1 safety cat. 3, EN6158 SIL II and EN60204-1 Stop category 0
• CE, UL, cUL and TUV
• Current vector control
• High starting torque (200% / 0.5 Hz)
• 1:100 speed control range
• Double rating ND 120%/1min and HD 150%/1 min
• IM[&]PM motor control
• Online Tuning
• Low-noise Low carrier technology
• 10 years lifetime design
• Built-in filter
• Screw-less terminals
• Control Terminals with memory backup
• 24 VDC control board power supply option
• Fieldbus communications: Modbus, Profibus, CanOpen, DeviceNet, Lonworks, CompoNet, Ethernet, ML-II
• Safety embedded: EN954-1 safety cat. 3, EN6158 SIL II and EN60204-1 Stop category 0
• CE, UL, cUL and TUV
Ratings
• 200 V Class single-phase 0.1 to 4 kW
• 200 V Class three-phase 0.1 to 15 kW
• 400 V Class three-phase 0.2 to 15 kW
Specifications
Type designation
V | V1000 series |
Z |
Z: European standard
specifications |
A |
A: Standard specs
|
B |
Voltage:
B: Single-phase 200 VAC 2: Three-phase 200 VAC 4: Three-phase 400 VAC |
O P 1 |
[”P” indicates a decimal point]
Max. applicable motor output 0P1: 0.1 kW ~ 015: 15 kW |
B |
Enclosure, Fin, Filter:
B: IP20 without top cover F: Nema 1 E: IP20 without top cover and C3 filter |
A |
Coating specs:
A: Standard |
A | Version |
200 V class
Single-phase:: VZ-@ | B0P1 | B0P2 | B0P4 | B0P7 | B1P5 | B2P2 | B4P0 | - | - | - | - | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Three-phase: VZ-@ | 20P1 | 20P2 | 20P4 | 20P7 | 21P5 | 22P2 | 24P0 | 25P5 | 27P5 | 2011 | 2015 | |
Motor [ kW]1 | For HD setting | 0,12 | 0,25 | 0,4 | 0,75 | 1,5 | 2,2 | 4,0 | 5,5 | 7,5 | 11 | 15 |
For ND setting | 0,18 | 0,37 | 0,75 | 1,1 | 2,2 | 3,0 | 5,5 | 7,5 | 11 | 15 | 18,5 | |
Output characteristics |
Inverter capacity kVA | 0,3 | 0,6 | 1,1 | 1,9 | 3,0 | 4,2 | 6,7 | 9,5 | 13 | 18 | 23 |
Rated output current (A) at HD | 0,8 | 1,6 | 3,0 | 5,0 | 8,0 | 11,0 | 17,5 | 25,0 | 33,0 | 47,0 | 60,0 | |
Rated output current (A) at ND | 1,2 | 1,9 | 3,5 | 6,0 | 9,6 | 12,0 | 21,0 | 30,0 | 40,0 | 56,0 | 69,0 | |
Max. output voltage | Proportional to input voltage: 0..240 V | |||||||||||
Max. output frequency | 400 Hz | |||||||||||
Power supply |
Rated input voltage and frequency |
Single-phase 200..240 V 50/60 Hz 3-phase 200..240 V 50/60 Hz |
||||||||||
Allowable voltage fluctuation |
-15% - +10% | |||||||||||
Allowable frequency fluctuation |
+5% |
1) Based on a standard 4-pole motor for maximum applicable motor output:
Heavy Duty (HD) mode with a 150% overload capacity
Normal Duty (ND) mode with a 120% overlaod capacity
400 V class
Three-phase: VZ-@ | 40P2 | 40P4 | 40P7 | 41P5 | 42P2 | 43PO | 44P0 | 45P5 | 47P5 | 4011 | 4015 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Motor [ kW]1 | For HD setting | 0,2 | 0,4 | 0,75 | 1,5 | 2,2 | 3,0 | 4,0 | 5,5 | 7,5 | 11 | 15 |
For ND setting | 0,37 | 0,75 | 1,5 | 2,2 | 3,0 | 3,7 | 5,5 | 7,5 | 11 | 15 | 18,5 | |
Output characteristics |
Inverter capacity [kVA] | 0,9 | 1,4 | 2,6 | 3,7 | 4,2 | 5,5 | 7,2 | 9,2 | 14,8 | 18 | 24 |
Rated output current (A) at HD | 1,2 | 1,8 | 3,4 | 4,8 | 5,5 | 7,2 | 9,2 | 14,8 | 18 | 24 | 31 | |
Rated output current (A) at ND | 1,2 | 2,1 | 4,1 | 5,4 | 6,9 | 8,8 | 11,1 | 17,5 | 23 | 31 | 38 | |
Max. output voltage | 0..480V (proportional to input voltage) | |||||||||||
Max. output frequency | 400 Hz | |||||||||||
Power supply |
Rated input voltage and frequency |
3-phase 380..480 VAC, 50/60 Hz | ||||||||||
Allowable voltage fluctuation |
-15% do +10% | |||||||||||
Allowable frequency fluctuation |
+5% |
Heavy Duty (HD) mode with a 150% overload capacity
Normal Duty (ND) mode with a 120% overlaod capacity.
Model number VZ-D | Specifications | |
---|---|---|
Control functions | Control methods Sine wave PWM (V/f control, sensorless current vector control) | |
Output frequency range | 0,1-400 Hz | |
Frequency tolerance | Digital set value: ±0.01% (-10..+50 ºC) | |
Analogue set value: ±0.1% (25 ±10 ºC) | ||
Resolution of frequency set value | Digital set value: 0.01 Hz (<100 Hz), 0.1 Hz (>100 Hz) | |
Analogue set value: 1/1000 of maximum frequency | ||
Resolution of output frequency 0.01 Hz | 0,01 Hz | |
Overload capability | Heavy duty use: 150% rated output current for one minute Normal duty use: 120% rated output current for one minute |
|
Frequency set value | 0..10 V (20 kΩ), 4..20 mA (250 Ω), 0..20 mA (250 Ω) Pulse train input, frequency setting value (selectable) |
|
Braking torque (short term peak torque) |
Short-term average deceleration torque: 150% (up 1.5 kW), 100% (for 1.5 kW), 50% (for 2.2 kW), 20% (fof bigger size) Continous regenerative torque: Aprox 20% (125% with optional braking resistor, 10%ED, 10 s, braking transistor built itn) |
|
V/f Characteristics | Possible to program any V/f pattern | |
Inputs signals | Seven of the following input signals are selectable: Forward/reverse run (3-wire sequence), fault reset, external fault (NO/NC contact input), multi-step speed operation, Jog command, accel/decel time select, external baseblock, speed search command, UP/DOWN command, accel/decel hold command, LOCAL/REMOTE selection, communication/control circuit terminal selection, mergency stop fault, emergency stop alarm, self test |
|
Output signals | Following output signals are selectable (NO/NC contact output, 2 photo-coupler outputs): Fault, running, zero speed, speed agree, frequency detection (output frequency <= or => set value), during overtorque detection, minor error, during baseblock, operation mode, inverter run ready, during fault retry, during undervoltage detection, reverse running, during speed search, data output through communication. |
|
Standard functions | Open-loop vector control, full-range automatic torque boost, slip compensation, 17-step speed operation (max.), restart after momentary power loss, DC injection braking current at stop/start (50% of inverter rated current, 0.5 sec, or less), frequency reference bias/gain, MEMOBUS communications (RS-485/422, max. 115K bps), fault retry, speed search, frequency upper/ lower limit setting, overtorque detection, frequency jump, accel/decel time switch, accel/decel prohibited, S-curve accel/decel, PID control, energy-saving control, constant copy. |
|
Analogue inputs | 2 analogue inputs, 0..10 V, 4..20 mA, 0..20 mA | |
Braking/acceleration times 0.01..6000 s | ||
Display | Optionally frequency, current or set value | |
Error and status LED | ||
Motor overload protection Electronic thermal overload relay | ||
Instantaneous overcurrent | Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class) | |
Overload | Heavy Duty: Motor coasts to a stop after 1 minute at 150% of inverter rated output current Normal Duty: Motor coasts to a stop after 1 minute at 120% of inverter rated output current |
|
Overvoltage | Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class) | |
Undervoltage | Stops when DC bus voltage is approx. 190 V or less (double for 400 V class) (approx. 150 V or less for single-phase series) |
|
Momentary power loss | Following items are selectable: not provided (stop if power loss is 15 ms or longer), continuous operation if power loss is approx. 0.5 s or shorter, continuous operation |
|
Cooling fin overheat | Protected by thermister | |
Stall prevention level | Stall prevention level Stall prevention during acceleration/deceleration and constant speed operation | |
Ground fault | Protected by electronic circuit (operation level is approx. 250% of rated output current) | |
Power charge indication | Indicates until the main circuit voltage reaches 50 V. | |
Degree of protection | IP20, NEMA1 | |
Cooling | Cooling fan is provided for 200 V, 0.75 kW (1HP) (3/single-phase) 400 V, 1.5 kW (2HP) (3-phase), others are self-cooling |
|
Ambient humidity | 95% RH or less (without condensation) | |
Storage temperature | -20 ºC..+60 ºC (short-term temperature during transportation) | |
Installation | Indoor (no corrosive gas, dust, etc.) | |
Installation height Max. 1000 m | Maks. 1000 m | |
Vibration | Up to 9.8 m/s2 at 10 to less than 20 Hz, Up to 6.37 m/s2 at 20 to 50 Hz |
Dimensions
IP 20 type 0,1 do 4 kW
Drawing 1
|
Drawing 2
|
Voltage class | Max. applicable motor output kW [kW] |
Inverter model VZA | Drawing | Dimensions in mm | Masa | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
W1 | H1 | W | H | D | tl | H2 | D1 | H3 | H4 | |||||
Single-phase 200 V |
0,12 | B0P1 | 1 | 56 | 118 | 68 | 128 | 76 | 3 | 5 | 6,5 | 0,6 | ||
0,25 | B0P2 | 0,7 | ||||||||||||
0,55 | B0P4 | 108 | 5 | 38,5 | 1,0 | |||||||||
1,1 | B0P7 | 2 | 96 | 108 | 137,5 | 58 | 1,5 | |||||||
1 5 | B1P5 | 154 | 1 5 | |||||||||||
2,2 | B2P2 | 128 | 140 | 163 | 65 | 2,1 | ||||||||
4,0 | B4P0 | W trakcie opracowania | ||||||||||||
Three-phase 200V |
0,12 | 30P1 | 1 | 56 | 118 | 68 | 128 | 76 | 3 | 5 | 6,5 | - | - | 06 |
0,25 | 20P2 | 0,6 | ||||||||||||
0,55 | 20P4 | 108 | 5 | 38,5 | 0,9 | |||||||||
1 1 | 30P7 | 128 | 1 1 | |||||||||||
1,5 | 21P5 | 2 | 96 | 108 | 129 | 58 | 1,3 | |||||||
2,2 | 22P2 | 137,5 | 1,4 | |||||||||||
40 | 34P0 | 128 | 140 | 143 | 65 | 2,1 | ||||||||
5,5 | 25P5 | 3 | 122 | 248 | 140 | 254 | 140 | - | 6 | 55 | 13 | 6,2 | 3,0 | |
7,5 | 27P5 | 3,8 | ||||||||||||
11 | 9011 | 160 | 284 | 180 | 290 | 163 | 8 | 75 | 15 | 5,5 | ||||
15 | 2015 | 192 | 336 | 220 | 358 | 187 | 7 | 78 | ' | 9,2 | ||||
Three-phase 400V |
0,37 | 40P2 | 2 | 96 | 118 | 108 | 128 | 81 | 5 | 5 | 10 | - | 0,8 | |
0,55 | 40P4 | 99 | 78 | 1 0 | ||||||||||
1,1 | 40P4 | 137,5 | 58 | 1,4 | ||||||||||
1,5 | 41P5 | 154 | 1,5 | |||||||||||
3 3 | 43P3 | 1 5 | ||||||||||||
3,0 | 43P0 | 1,5 | ||||||||||||
4,0 | 44P0 | 128 | 140 | 143 | 65 | 2,1 | ||||||||
5,5 | 45P5 | 3 | 122 | 248 | 140 | 254 | 140 | " | 6 | 55 | 13 | 6 | 3,8 | |
7,5 | 47P5 | 6,2 | 3,8 | |||||||||||
11 | 4011 | 160 | 284 | 180 | 290 | 143 | 8 | 15 | 6 | 5,2 | ||||
15 | 4015 | 163 | 75 | 5,5 |
V1000 + Option board (Communication and 24V DC power supply)