Humidity and temperature sensors with ATEX certificate
  • Humidity and temperature sensors with ATEX certificate
  • Humidity and temperature sensors with ATEX certificate

Photos are for informational purposes only. View product specification

please use latin characters

Humidity and temperature sensors with ATEX certificate

MELA®-Humidity/-temperature sensors in these series are used to measure relative humidity or temperature or relative humidity and temperature in air and other non-aggressive gases in explosion hazardous arears and in locations with inflammable dust.
The sensors comprise a sensor part with a sintered filter mounted on a robust aluminium die-cast housing (transmitter part), both made of stainless steel. Connection to a non-intrinsically safe electric circuit for
humidity (F*C3.Ex/8) and for temperature sensors (T*C3.Ex/8) is achieved with a 1-channel transmitter power
supply unit and for the combined humidity and temperature sensors(K*C3.Ex/8) either with a 2-channel or with two 1- channel transmitter power supply units with galvanic isolation between input-/output circuits and power supply.

Use of MELA® capacitive humidity sensor elements is a guarantee of:
- high long-term stability
- almost linear characteristic curve
- resistance to dew formation
- small hysteresis
- good dynamic performance
 
Technical data

Humidity
Measuring range
0...100%rh
Accuracy (MB 5...95%rh w 10...40 °C)
±2%rh
w T40°C
0,1%/K dodatk.
Output
4...20 mA
Temperature temperatura Measuring element (ref. DIN IEC 751)
Pt 100 klasa B
Measuring range
-20...+80 °C
(special models with special measuring range on demand)
Accuracy
±0,3 K
w T40°C
±0,007 K/K dodatk.
Output
4...20 mA
Others
Storage temperature
20...+80°C
Approved operating temperature range
-20...+80°C
Maximum surface temperature of housing
95°C
Sensor operating voltage
13...24V DC(intrinsically safe)
Maximum admissible input voltage  U i
24V DC
Maximum admissible input amperage Ii
100 mA
Maximum admissible input power Pi
780 mW
Maximum inner capacity Ci
negligible
Maximum inner inductivity Li
negligible
Degree of protection
IP 65
electrical equipment in instrument group II with protection
provided by housing
Housing material
Sensor part
stainless steel
Transmitter part
alu-diecast
Cable screwing M16 x 1.5
clamping range
3...7 mm
initial torque
(for recommended cable type)
4,0 Nm
   
Cable between sensor and transmitter power supply unit, shielded
Recommended type
NF14 (Metrofunk)
Maximum power transmission length
200 m
Maximum cable capacity
20nF/100 m
Ends of the power line
Wire sleeves with plastic collars
Zalecane zasilacze przetworników
frmy Hans Turck GmbH [&] Co. KG
MK33-11ExO-Li/24V DC (jednokanałowy)
napięcie UO
20V
natężenie IO/span>
77 mA
moc PO
560 mW
zewnętrzna pojemność CO
85 nF
trapezowa charakterystyka
 
IM33-22Ex-Hi/24V DC (dwukanałowy)
napięcie UO<
21,9V
natężenie IO<
95 mA
moc PO<
778 mW
zewnętrzna pojemność CO<
57 nF
trapezowa charakterystyka
 
Wszystkie dane i certyfikaty są dostępne pod adresem: www.turck.com
 
dyrektywa o ochronie przed wybuchami 94/9/EG
ogólne wymagania
EN 60079-0:2004
iskrobezpieczność "i"
EN 60079-11:2007
urządzenia kategorii 1G
EN 60079-26:2004
Ochrona przed pyłem obudową "t"
EN 60079-31:2009
dyrektywa dotycząca kompatybilności elektromagnetycznej 2004/108/EG
Wymagania ogólne
EN 61326-1:2006
Wymagania szczególne
EN 61326-2-3:2007
 

Dane techniczne

Measured variable GC series KC series
F (wilgotność względna) FGC3.Ex/8 FKC3.Ex/8
K (wilgotność wzgl. / temp) KGC3.Ex/8 KKC3.Ex/8
T (temperatura) TGC3.Ex/8 TKC3.Ex/8
ciężar ca. 380 g ca. 470 g

II 1/2 G Ex ia IIC T4

II 2D Ex tb IIIC T95°C


Wyrób dopuszczony do stosowania w obszarach zagrożonych wybuchem według:

• zaświadczenia badania wzoru
• konstrukcyjnego WE
• IBExU 07 ATEX 1114


Ilustracje z wymiarami
GC3.Ex/8
do montażu ściennego)
KC3.Ex/8
(do monta.u w kana.ach)
*) typ specjalny z rurką czujnika o ł.ugości 290 mm na specjalne życzenie

Ilustracje przyłączeniowe
Ilustracje z wymiarami do przyłączenia do strefy 0

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us

ASK FOR THE PRODUCT close
Message sent successfully.
ASK FOR THE PRODUCT close
Browse

Add to Wishlist

You must be logged in

MELA®-Humidity/-temperature sensors in these series are used to measure relative humidity or temperature or relative humidity and temperature in air and other non-aggressive gases in explosion hazardous arears and in locations with inflammable dust.
The sensors comprise a sensor part with a sintered filter mounted on a robust aluminium die-cast housing (transmitter part), both made of stainless steel. Connection to a non-intrinsically safe electric circuit for
humidity (F*C3.Ex/8) and for temperature sensors (T*C3.Ex/8) is achieved with a 1-channel transmitter power
supply unit and for the combined humidity and temperature sensors(K*C3.Ex/8) either with a 2-channel or with two 1- channel transmitter power supply units with galvanic isolation between input-/output circuits and power supply.

Use of MELA® capacitive humidity sensor elements is a guarantee of:
- high long-term stability
- almost linear characteristic curve
- resistance to dew formation
- small hysteresis
- good dynamic performance
 
Technical data

Humidity
Measuring range
0...100%rh
Accuracy (MB 5...95%rh w 10...40 °C)
±2%rh
w T40°C
0,1%/K dodatk.
Output
4...20 mA
Temperature temperatura Measuring element (ref. DIN IEC 751)
Pt 100 klasa B
Measuring range
-20...+80 °C
(special models with special measuring range on demand)
Accuracy
±0,3 K
w T40°C
±0,007 K/K dodatk.
Output
4...20 mA
Others
Storage temperature
20...+80°C
Approved operating temperature range
-20...+80°C
Maximum surface temperature of housing
95°C
Sensor operating voltage
13...24V DC(intrinsically safe)
Maximum admissible input voltage  U i
24V DC
Maximum admissible input amperage Ii
100 mA
Maximum admissible input power Pi
780 mW
Maximum inner capacity Ci
negligible
Maximum inner inductivity Li
negligible
Degree of protection
IP 65
electrical equipment in instrument group II with protection
provided by housing
Housing material
Sensor part
stainless steel
Transmitter part
alu-diecast
Cable screwing M16 x 1.5
clamping range
3...7 mm
initial torque
(for recommended cable type)
4,0 Nm
   
Cable between sensor and transmitter power supply unit, shielded
Recommended type
NF14 (Metrofunk)
Maximum power transmission length
200 m
Maximum cable capacity
20nF/100 m
Ends of the power line
Wire sleeves with plastic collars
Zalecane zasilacze przetworników
frmy Hans Turck GmbH [&] Co. KG
MK33-11ExO-Li/24V DC (jednokanałowy)
napięcie UO
20V
natężenie IO/span>
77 mA
moc PO
560 mW
zewnętrzna pojemność CO
85 nF
trapezowa charakterystyka
 
IM33-22Ex-Hi/24V DC (dwukanałowy)
napięcie UO<
21,9V
natężenie IO<
95 mA
moc PO<
778 mW
zewnętrzna pojemność CO<
57 nF
trapezowa charakterystyka
 
Wszystkie dane i certyfikaty są dostępne pod adresem: www.turck.com
 
dyrektywa o ochronie przed wybuchami 94/9/EG
ogólne wymagania
EN 60079-0:2004
iskrobezpieczność "i"
EN 60079-11:2007
urządzenia kategorii 1G
EN 60079-26:2004
Ochrona przed pyłem obudową "t"
EN 60079-31:2009
dyrektywa dotycząca kompatybilności elektromagnetycznej 2004/108/EG
Wymagania ogólne
EN 61326-1:2006
Wymagania szczególne
EN 61326-2-3:2007
 

Dane techniczne

Measured variable GC series KC series
F (wilgotność względna) FGC3.Ex/8 FKC3.Ex/8
K (wilgotność wzgl. / temp) KGC3.Ex/8 KKC3.Ex/8
T (temperatura) TGC3.Ex/8 TKC3.Ex/8
ciężar ca. 380 g ca. 470 g

II 1/2 G Ex ia IIC T4

II 2D Ex tb IIIC T95°C


Wyrób dopuszczony do stosowania w obszarach zagrożonych wybuchem według:

• zaświadczenia badania wzoru
• konstrukcyjnego WE
• IBExU 07 ATEX 1114


Ilustracje z wymiarami
GC3.Ex/8
do montażu ściennego)
KC3.Ex/8
(do monta.u w kana.ach)
*) typ specjalny z rurką czujnika o ł.ugości 290 mm na specjalne życzenie

Ilustracje przyłączeniowe
Ilustracje z wymiarami do przyłączenia do strefy 0