Rails HeiPac Vario Compact

Rails HeiPac Vario Compact | HEITEC AG

SUBRACKS HORIZONTAL RAILS HeiPac Vario COMPACT

Overview horizontal rails HeiPac Vario COMPACT

Main
sections





Additional sections
V 1
Front horizontal rail
V-Ext. 1
Front horizontal rail, with 10 mm extension, for extractor handle type IV or VII
BP 1
Rear horizontal rail
CON 1
Rear horizontal rail, with integral Z rail
BP-M 1
Rear horizontal rail, centre
CON-M 1
Rear horizontal rail, with integral Z rail (also for HeiPac EASY)
Page 70 Page 70 Page 71 Page 71 Page 72 Page 72
E
Adaptor rail, rear centre, to acommodate guide rails

Page 140
- - - -
F
Z rail for connector

Page 144
- - - -
G
Insulating strip1)

Page 145
- - - -
H
Conductive strip2)

Page 145
- -   -
I
Threaded insert

Page 144
- -
J
Identification strips

Page 144
- -
K
EMC gaskets, horizontal

Page 145
- - - -

For 1)insulated or 2)conductive attachment of backplanes.
All system requirements may be covered with just a few basic types of horizontal rail. A cost-effective, easy-to-manage range.
 
Horizontal rail Vario V 1, front
To accommodate guide rails and for the attachment of front panels

  • Front projection 2.5 mm corresponding to IEC 60 297-3-101
  • HP pitch pattern of holes for the precise installation of guide rails
  • M4 thread on end face
  • Straight-through core hole

Material
Extruded aluminium section

Surface finish
Clear-chromated

Usable width (HP)Packs ofOrder No.
21 1 3685.985
42 1 3684.560

+Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300

+Accessories
Threaded inserts, packs of 1, order no. 3684.610
see page 144



 
Horizontal rail Vario V-Ext. 1, front, with 10 mm extension
For type IV, IVs and VII injector/extractor handle
To accommodate guide rails and for the attachment of front panels.

  • Front projection 10 mm corresponding to IEEE 1101.10 and IEC 60 297-3-102
  • HP pitch pattern of holes for the precise installation of guide rails
  • M4 thread on end face
  • Straight-through core hole


Material
Extruded aluminium section

Surface finish
Clear-chromated

Usable width (HP)Packs ofOrder No. unprintedOrder No. printed
42 1 3684.565 9921.7901)

1) with HP pattern printing

+ Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300
see page 202

+Accessories
Threaded inserts, packs of 1
order no. 3684.610
see page144



 
Horizontal rail Vario BP 1, for backplaney
To accommodate guide rails and for the attachment of Z rails, insulating strips or conductive strips.

  • Tapped holes M2.5 on a 1 HP pitch pattern for mounting backplanes and Z rails
  • HP pitch pattern of holes for the precise installation of guide rails
  • M4 thread on end face
  • Applicable for top-mounting under covers
  • Straight-through core holey


Material
Extruded aluminium section

Surface finishi
Clear-chromated

Usable width (HP)Packs ofOrder No.
21 1 3685.991
42 1 3684.570

+ Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300
see page 202

+ Accessories
Conductive strips
see page 145
Insulating strips
see page 145
Z rail
see page 1444



 
Horizontal rail Vario CON 1, with integral Z rail for connector
To accommodate guide rails. Integral Z rail for mounting connectors (CON) to IEC 60 603-2.

  • HP pitch pattern of holes for the precise installation of guide rails
  • Tapped holes M2.5 for connector mounting
  • Applicable for top-mounting under covers
  • M4 thread on end face
  • Straight-through core hole


Material
Extruded aluminium section

Surface finish
Clear-chromated

Usable width (HP)Packs ofOrder No.
42 1 3686.191

+ Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300
see page 202

+ Accessoriesa
Threaded inserts, packs of 1
Order no. 3684.608
see page 144



 
Horizontal rail Vario BP-M 1, for backplane, centre
When using 6 U PCBs or box-type plug-in units. Facility for the attachment of Z rails, insulating strips or conductive strips.

  • Tapped holes M2.5
  • M4 thread on end face
  • Straight-through core hole


Material
Extruded aluminium section

Surface finish
Clear-chromated

Usable width (HP)Packs ofOrder No.
42 1 3684.580

+ Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300
see page 202

+ Accessories
Conductive strips
see page 145
Insulating strips
see page 145
Z rails
see page 144



 
Horizontal rail Vario CON-M 1, with integral Z rail for connector, rear centre
When using 6 U PCBs or box-type plug-in units. Integral Z rail for mounting connectors (CON) to IEC 60 603-2

  • Tapped holes M2.5
  • M4 thread on end face
  • Straight-through core hole


Material
Extruded aluminium section

Surface finish
Clear-chromated

Usable width (HP)Packs ofOrder No.
42 1 3687.600

+ Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300
see page 202



 
Adaptor rail, rear centre
When subdividing 6 U into 2 x 3 U, the adaptor rail accommodates the guide rails when fastened to the centre horizontal rail.

  • HP pitch pattern of holes for the precise installation of guide railsr
  • M4 and M2.5 thread on the end face
  • Applicable in combination with BP-M 1, BP-M 2 and EST-M 1
  • Straight-through core hole


Material
Extruded aluminium section

Surface finish
Clear-chromated

Usable width (HP)Packs ofOrder No.
42 1 3684.590

+ Also required
Assembly screws M4 x 12
Packs of 100, order no. 3654.300
see page 202



 

SUBRACKS COMPONENTS HeiPac Vario COMPACT

Side panels for HeiPac Vario
Mounting holes and anti-twist half-shears on a 10 mm pitch pattern

Material
2.5 mm Aluminium, Clear-chromated

 Order No.
U36
T mma 1) mmPacks of  
225 200 1 3684.512 3684.530
285 260 1 3684.514 3684.532
Versions with PG gland:
225 200 1 3687.746 3687.758
285 260 1 3687.747 3687.749

1) a = Distance between the first and last mounting hole.


 
Mounting blocks for cover plates
For mounting covers, versions 1 – 4, on the subrack side panel.

Material
Die-cast zinc

Surface finish
Nickel-plated

Note
For EMC applications, mounting blocks must be fi tted across the entire subrack depth. The table here shows the number of mounting blocks required to install 1 cover plate with EMC shielding.

 Packs ofOrder No.
Mounting blocks 28.5 mm long 10 3684.234


Number of mounting blocks for max. EMC protectionCover plate depth mm
4 142
8 192
10 212
12 252
14 272
16 312
18 332
20 372
24 432
28 492
32 552

+ Also required
Assembly screws M3 x 6, packs of 100, order no. 3684.233, see page 202



 
Flange 19" for HeiPac Vario COMPACT, for applications with mounting plate
Material
Extruded aluminium section

Surface finish
Clear-chromated

 Packs ofOrder No.
U36
left 1 3687.776 3687.800
right 1 3687.743 3687.777

 

SUBRACKS COVERS HeiPac Vario COMPACT

Covers version 1
For all HeiPac Vario subracks
To cover the overallsubrack depth
(EMC application) or as connector protection
  • Flat design for top and bottom
  • Optionally solid or perforated
  • For mounting on the subrack side panel with the aid of mounting blocks

Material
1.0 mm aluminium, unplated, hole diameter 4 mm in perforated version.

Supply includes
1 cover plate

Note
For EMC applications, additional mounting blocks must be fitted across the entire subrack depth

 Order No.
Single piece
  HPFor side panel depth (T) mmCover depth (d1) mm  Perforated Solid
21 225 192 3687.618 3687.620
21 285 252 3687.619 3687.621
42 225 192 3687.623 3687.627
42 285 252 3685.642 3687.629


+ Also required
Mounting blocks, see page 148
EMC gaskets for cover plates, see page 147
Assembly screws, packs of 100, order no. 3684.233
see page 202



 
Covers version 2
For all HeiPac Vario subracks
To cover the PCB depth

  • Flat design for top and bottom
  • Optionally solid or perforated
  • For mounting on the subrack side panel with the aid of mounting blocks

Material
1.0 mm aluminium, unplated, hole diameter 4 mm in perforated version

Supply includes
1 cover plates

 Order No.
Single piece
  HPFor side panel depth (T) mmCover depth (d1) mm Perforated Solid
21 160 142 3687.630 3687.634
21 220 202 3687.631 3687.635
42 160 142 3684.957 3687.626
42 220 202 3687.633 3687.637


+ Also required
Mounting blocks, see page 148
Assembly screws, packs of 100, order no. 3684.233
see page 202



 

SUBRACKS TOP-HAT RAIL HeiPac Vario COMPACT

Top-hat rail adapter
Top-hat rail adapter to directly mount a component or device on a top-hat rail

Material
Extruded aluminium section

Packs ofOrder No.
1 3687.739

+ Also required
Assembly screws ,packs of 100
Order no. 3606.550
see page 202


 
Back panel for top-hat rail mounting
For HeiPac Vario COMPACT subracks
For top-hat rail mounting of subracks

Material
Aluminium, clear-chromated

 Order No.
U33
Width HPPacks of  Non-EMC  EMC
21 1 3687.742 3687.750
42 1 3687.744 3687.751

+ Also required
Top-hat rail adapter, packs of 1
Order no. 3687.739
see page 75

What is the sum of 3 and 6?
 

Go back

Recommended products

Czujnik ciśnienia arrow

NSCDRRN015PDUNV
Honeywell

Moduł IGBT arrow

SKM200GAR123D
SEMIKRON

Moduł diodowo-tyrystorowy arrow

SKKH57/16E
SEMIKRON

Czujnik indukcyjny arrow

E2A3-S08KS03-M1-C1
Omron

Our suppliers

There are no items in your cart.