J2190A - активен филтър
  • J2190A - активен филтър

Снимките са само с информационна цел. Вижте спецификацията на продукта

please use latin characters

Производител: Picotest

J2190A - активен филтър

J2190A 0.1Hz – 10Hz Active filter

The J2190A active filter presents a high impedance (approximately 150kOhms) minimizing the loading of the circuit being tested. The output impedance is 50 Ohms allowing low noise coaxial connections to all typical test equipment. The 0.1Hz-10Hz noise band is common for op-amp measurements, voltage regulators and voltage references. Many application notes offer schematics of such a filter for test purposes. An engineer’s time is much too valuable to be spent building test equipment. We have created a 4th order high pass and 4th order low pass filter with an optimally flat response and 0dB gain. Additional filters can be cascaded for even sharper cutoff.

 

Key features:

  • 0.1Hz-10Hz
  • 4th Order Filter
  • Low Pass and Cascadable
  • Very low noise
  • Powered from a J2170A (included)

Frequency response of a single filter (red) and 2 cascaded filters (blue):

J2190A – filtr aktywny

По-малко
Прочетете още

Изпратете запитване

Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?

Свържете се с нас

ПОИСКАЙТЕ ПРОДУКТА close
Съобщението е изпратено успешно.
ПОИСКАЙТЕ ПРОДУКТА close
Преглед

Добави към списъка с желания

Трябва да сте влезли

J2190A 0.1Hz – 10Hz Active filter

The J2190A active filter presents a high impedance (approximately 150kOhms) minimizing the loading of the circuit being tested. The output impedance is 50 Ohms allowing low noise coaxial connections to all typical test equipment. The 0.1Hz-10Hz noise band is common for op-amp measurements, voltage regulators and voltage references. Many application notes offer schematics of such a filter for test purposes. An engineer’s time is much too valuable to be spent building test equipment. We have created a 4th order high pass and 4th order low pass filter with an optimally flat response and 0dB gain. Additional filters can be cascaded for even sharper cutoff.

 

Key features:

  • 0.1Hz-10Hz
  • 4th Order Filter
  • Low Pass and Cascadable
  • Very low noise
  • Powered from a J2170A (included)

Frequency response of a single filter (red) and 2 cascaded filters (blue):

J2190A – filtr aktywny

По-малко
Прочетете още