Водни радиатори - охлаждащи течности
  • Водни радиатори - охлаждащи течности

Снимките са само с информационна цел. Вижте спецификацията на продукта

please use latin characters

Производител: ALUTRONIC

Водни радиатори - охлаждащи течности

Water heat sinks in shape of cooling plates are used for power diodes, thyristor and transistors with flat base cooling.

It is possible to assembly another sub-assemblies and electronic devices, which has flat base. Cooling plates can be made out of copper or aluminium. They can by uniform plates with hollowed internal channels or repeatable elements with channels, which are put together.

We present plates made of aluminium. Basic plate construction unit is element of rectangular section - dimensions: 27 mm (height) and 19 mm (width). Those elements can be directly connected together, or separated with distance elements, so there is enough space for elements assembly.

Technical data

  • Max dimensions: 600x600 mm
  • Max output water temperature: 45ºC
  • Max radiator surface temperature: 70ºC
  • temperature difference between water inlet and outlet:7ºC
  • Recommended water flow: 10 l/min
  • Recommended water pressure: 9 bar
  • Rth: 0,005, 0,015, 0,068 ºC/W – depends on construction version
  • Dissipation power: 1600, 3600, 5000W – depends on construction version

Изпратете запитване

Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?

Свържете се с нас

ПОИСКАЙТЕ ПРОДУКТА close
Съобщението е изпратено успешно.
ПОИСКАЙТЕ ПРОДУКТА close
Преглед

Добави към списъка с желания

Трябва да сте влезли

Water heat sinks in shape of cooling plates are used for power diodes, thyristor and transistors with flat base cooling.

It is possible to assembly another sub-assemblies and electronic devices, which has flat base. Cooling plates can be made out of copper or aluminium. They can by uniform plates with hollowed internal channels or repeatable elements with channels, which are put together.

We present plates made of aluminium. Basic plate construction unit is element of rectangular section - dimensions: 27 mm (height) and 19 mm (width). Those elements can be directly connected together, or separated with distance elements, so there is enough space for elements assembly.

Technical data

  • Max dimensions: 600x600 mm
  • Max output water temperature: 45ºC
  • Max radiator surface temperature: 70ºC
  • temperature difference between water inlet and outlet:7ºC
  • Recommended water flow: 10 l/min
  • Recommended water pressure: 9 bar
  • Rth: 0,005, 0,015, 0,068 ºC/W – depends on construction version
  • Dissipation power: 1600, 3600, 5000W – depends on construction version