Заваръчни машини за комбинирани емайлирани проводници

ESS6

The ESS6 thermo-clamping machine has been developed for connecting enameled wires and cables in the electromechanical industry for the production of electric motors, transformers, coils, etc. The machine combines a high-speed cycle with reliability and repeatability of the joining process. The process is based on the use of a clip, produced by the machine itself, as joint support. This clamp is made from a tin-coated copper strip, available in various cross-sections: 0.5x4mm, 0.5x5mm, 0.8x6mm.

GF10200

The GF10200 machine has been designed for connecting wires and enameled cables typically used in the electromechanical industry for building electric motors, transformers, coils, etc. The machine combines a high-speed cycle with reliability and repeatability of the joining process. The GF10200 machine uses connectors or cable terminals as the joint element.

GF351000

The GF351000 machine has been designed for connecting wires and enameled cables typically used in the electromechanical industry for building electric motors, transformers, coils, etc. The machine combines a high-speed cycle with reliability and repeatability of the joining process. The GF351000 machine uses connectors or cable terminals as the joint element.

GFA301000

The GFA301000 machine has been developed for connecting enameled wires and cables typically used in the electromechanical industry. It combines a semi-automatic process with ease of use, flexibility, and high performance to achieve the best, consistent, and repeatable result. The equipment was designed and built to meet the requirements of the automotive market such as data tracking and management.

GFAA301000

The GFAA301000 machine has been designed and built to meet every need for automation of the joining process, as well as tracking and data management. The GFAA301000 demonstrates its versatility through a special joining head adapted to any requirement, and its dimensions can be modified depending on the available space and stator handling. Movement is achieved using a variable number of independent axes (4 to 7) managed by brushless motors and intelligent drives. This allows reaching the connection point without operator presence, except for the preparation station placed near the machine.

GFP301000

The GFP301000 machine has been developed for connecting enameled wires and cables in a semi-automatic process combined with ease of use, flexibility, and high production efficiency. The machine is intended for use in situations where stator handling is difficult or where dimensions and weight make it hard to move. The GFP301000 device is mounted on a trolley that allows movement near the stator and is equipped with a special thermo-joining head mounted on a two-axis system. The thermo-joining head can easily reach the connection point thanks to a movement range of 700 mm in the vertical axis and about 900 mm in the horizontal axis and can rotate manually about 225° in the vertical axis. Up/down/left/right movements are controlled using a joystick, and all other movements are performed manually. Additionally, the thermo-joining head can be installed in a vertical or horizontal position with a lateral tilt of approximately +/- 15°.

Spare parts for devices

Aspirartore 400

JET 400 Fume Extractor

The JET 400 fume extractor is a vapor filtering unit. Its slim body, easy mobility, and automatic cleaning system make it a flexible and efficient machine.