Преобразователи в технология Eta
  • Преобразователи в технология Eta

Снимките са само с информационна цел. Вижте спецификацията на продукта

please use latin characters

Производител: LEM

Преобразователи в технология Eta

In 2001, LAS series transducers based on the new Eta technology were introduced into production.
This technology uses the integrated ASIC control element and combines the advantages of transducers with open feedback loop (O / L), i.e. low power consumption from auxiliary sources (20mAsk) and a wide frequency band (0 ... 100kHz) which is the privilege of the transducers with closed feedback loop (C / L).

Transmitters in the Eta technology are made for a rated current of 50A and 100A, they are characterized by an attractive price, compact construction, high resistance to EMC interference, good insulation and unidirectional + 5V supply voltage.

 
Electrical parameters

LAS 50-TP

LAS 100-TP/SP1
IPN - nominal current 50Ask 100Ask
IP - measurement range 0...+/-150A (characteristic below) 0... ±300A
VW - analogue voltage output with IP -2,5 +/-0,625V/ IP/IPN 2,5 (±0,2) ±0,625 IP/IPN
RL- load resistance ≥ 2kΩ ≥ 2kΩ
IC - Current with VC=5V 16mA 17mA
Vd - Insulation voltage 50/60Hz 1min...5kV 50..60Hz 1min 5kV
X - measurement accuracy with Ipn +/-0,5% ± 0,5%
eL - linearity  0...Ipn <0,8% <0,9%
f - bandwidth 0-100kHz 0-100kHz
TA- operation temperature range -25 do 85°C -40 do 85°C
 
Dimensions [mm]: LAS 50-TP, LAS 100-TP/SP1
Bottom view Front view Left side view
LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1
Connection    
LEM LAS 50-TP, LAS 100-TP/SP1   LEM LAS 50-TP, LAS 100-TP/SP1
По-малко
Прочетете още

Изпратете запитване

Интересувате ли се от този продукт? Имате ли нужда от допълнителна информация или индивидуални цени?

Свържете се с нас

ПОИСКАЙТЕ ПРОДУКТА close
Съобщението е изпратено успешно.
ПОИСКАЙТЕ ПРОДУКТА close
Преглед

Добави към списъка с желания

Трябва да сте влезли

In 2001, LAS series transducers based on the new Eta technology were introduced into production.
This technology uses the integrated ASIC control element and combines the advantages of transducers with open feedback loop (O / L), i.e. low power consumption from auxiliary sources (20mAsk) and a wide frequency band (0 ... 100kHz) which is the privilege of the transducers with closed feedback loop (C / L).

Transmitters in the Eta technology are made for a rated current of 50A and 100A, they are characterized by an attractive price, compact construction, high resistance to EMC interference, good insulation and unidirectional + 5V supply voltage.

 
Electrical parameters

LAS 50-TP

LAS 100-TP/SP1
IPN - nominal current 50Ask 100Ask
IP - measurement range 0...+/-150A (characteristic below) 0... ±300A
VW - analogue voltage output with IP -2,5 +/-0,625V/ IP/IPN 2,5 (±0,2) ±0,625 IP/IPN
RL- load resistance ≥ 2kΩ ≥ 2kΩ
IC - Current with VC=5V 16mA 17mA
Vd - Insulation voltage 50/60Hz 1min...5kV 50..60Hz 1min 5kV
X - measurement accuracy with Ipn +/-0,5% ± 0,5%
eL - linearity  0...Ipn <0,8% <0,9%
f - bandwidth 0-100kHz 0-100kHz
TA- operation temperature range -25 do 85°C -40 do 85°C
 
Dimensions [mm]: LAS 50-TP, LAS 100-TP/SP1
Bottom view Front view Left side view
LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1
Connection    
LEM LAS 50-TP, LAS 100-TP/SP1   LEM LAS 50-TP, LAS 100-TP/SP1
По-малко
Прочетете още