Wandler in der ETA-Technologie
  • Wandler in der ETA-Technologie

Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: LEM

Wandler in der ETA-Technologie

In 2001, LAS series transducers based on the new Eta technology were introduced into production.
This technology uses the integrated ASIC control element and combines the advantages of transducers with open feedback loop (O / L), i.e. low power consumption from auxiliary sources (20mAsk) and a wide frequency band (0 ... 100kHz) which is the privilege of the transducers with closed feedback loop (C / L).

Transmitters in the Eta technology are made for a rated current of 50A and 100A, they are characterized by an attractive price, compact construction, high resistance to EMC interference, good insulation and unidirectional + 5V supply voltage.

 
Electrical parameters

LAS 50-TP

LAS 100-TP/SP1
IPN - nominal current 50Ask 100Ask
IP - measurement range 0...+/-150A (characteristic below) 0... ±300A
VW - analogue voltage output with IP -2,5 +/-0,625V/ IP/IPN 2,5 (±0,2) ±0,625 IP/IPN
RL- load resistance ≥ 2kΩ ≥ 2kΩ
IC - Current with VC=5V 16mA 17mA
Vd - Insulation voltage 50/60Hz 1min...5kV 50..60Hz 1min 5kV
X - measurement accuracy with Ipn +/-0,5% ± 0,5%
eL - linearity  0...Ipn <0,8% <0,9%
f - bandwidth 0-100kHz 0-100kHz
TA- operation temperature range -25 do 85°C -40 do 85°C
 
Dimensions [mm]: LAS 50-TP, LAS 100-TP/SP1
Bottom view Front view Left side view
LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1
Connection    
LEM LAS 50-TP, LAS 100-TP/SP1   LEM LAS 50-TP, LAS 100-TP/SP1
Weniger
Weiterlesen

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns

FRAGEN SIE NACH DEM PRODUKT close
Nachricht erfolgreich gesendet.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

In 2001, LAS series transducers based on the new Eta technology were introduced into production.
This technology uses the integrated ASIC control element and combines the advantages of transducers with open feedback loop (O / L), i.e. low power consumption from auxiliary sources (20mAsk) and a wide frequency band (0 ... 100kHz) which is the privilege of the transducers with closed feedback loop (C / L).

Transmitters in the Eta technology are made for a rated current of 50A and 100A, they are characterized by an attractive price, compact construction, high resistance to EMC interference, good insulation and unidirectional + 5V supply voltage.

 
Electrical parameters

LAS 50-TP

LAS 100-TP/SP1
IPN - nominal current 50Ask 100Ask
IP - measurement range 0...+/-150A (characteristic below) 0... ±300A
VW - analogue voltage output with IP -2,5 +/-0,625V/ IP/IPN 2,5 (±0,2) ±0,625 IP/IPN
RL- load resistance ≥ 2kΩ ≥ 2kΩ
IC - Current with VC=5V 16mA 17mA
Vd - Insulation voltage 50/60Hz 1min...5kV 50..60Hz 1min 5kV
X - measurement accuracy with Ipn +/-0,5% ± 0,5%
eL - linearity  0...Ipn <0,8% <0,9%
f - bandwidth 0-100kHz 0-100kHz
TA- operation temperature range -25 do 85°C -40 do 85°C
 
Dimensions [mm]: LAS 50-TP, LAS 100-TP/SP1
Bottom view Front view Left side view
LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1 LEM LAS 50-TP, LAS 100-TP/SP1
Connection    
LEM LAS 50-TP, LAS 100-TP/SP1   LEM LAS 50-TP, LAS 100-TP/SP1
Weniger
Weiterlesen