Dioden-Thyristor-Leistungsblöcke M1C
  • Dioden-Thyristor-Leistungsblöcke M1C

Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: DACPOL

Dioden-Thyristor-Leistungsblöcke M1C

One element power diode-thyrisor block with radiator RY.RY.

Properties:
• Two element power diode-thyristor block with both side cooling– RY
• Natural cooling

Typical applications:
• rectifiers, converters, supplies.
• DC power regulators
• power contactors
• soft-starts

Options:
• Standard – Diagram. 1
• Execution with current busses
• With blacken radiator
• Thermal protection
• RC circuit
• fuse
• forced cooling

Power block selection:
• There are different semiconductors used, depending on the load. Used semiconductor size is given in the Table 1.
Scheme


Operation conditions:
One element power blocks are used in power electronic systems.
• Ambient air temperature -100 C - +400 C;
• Atmospheric pressure  860hPa - 1060hPa
• Humidity less then 80% @ temperature 40 C
• Cooling air without aggressive factors. .

 

Table 1 Power blocks parameters
 

Module type Mean current IF(AV) [A] Blocking voltage  U RRM
    [V]		 Overcurrent
I FSM
[A]		 Semiconductor size
[mm]		 Block Weight 
[kg]

M1C7P

 450…650 400…2400 7000…10000 6,9

M1C8P

 630…1000 400…8500 10000…24000 6,9

M1C9P

 1000…2000 400…7500 20000…42000 16,4

M1C11P

 1000…3200 400…6000 27000…65000 18,3

 
Power block scheme M1C...P
 
Weniger
Weiterlesen

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns

FRAGEN SIE NACH DEM PRODUKT close
Nachricht erfolgreich gesendet.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

One element power diode-thyrisor block with radiator RY.RY.

Properties:
• Two element power diode-thyristor block with both side cooling– RY
• Natural cooling

Typical applications:
• rectifiers, converters, supplies.
• DC power regulators
• power contactors
• soft-starts

Options:
• Standard – Diagram. 1
• Execution with current busses
• With blacken radiator
• Thermal protection
• RC circuit
• fuse
• forced cooling

Power block selection:
• There are different semiconductors used, depending on the load. Used semiconductor size is given in the Table 1.
Scheme


Operation conditions:
One element power blocks are used in power electronic systems.
• Ambient air temperature -100 C - +400 C;
• Atmospheric pressure  860hPa - 1060hPa
• Humidity less then 80% @ temperature 40 C
• Cooling air without aggressive factors. .

 

Table 1 Power blocks parameters
 

Module type Mean current IF(AV) [A] Blocking voltage  U RRM
    [V]		 Overcurrent
I FSM
[A]		 Semiconductor size
[mm]		 Block Weight 
[kg]

M1C7P

 450…650 400…2400 7000…10000 6,9

M1C8P

 630…1000 400…8500 10000…24000 6,9

M1C9P

 1000…2000 400…7500 20000…42000 16,4

M1C11P

 1000…3200 400…6000 27000…65000 18,3

 
Power block scheme M1C...P
 
Weniger
Weiterlesen