MULTILIFT COLUMNS
MULTILIFT COLUMNS

Fotografie slouží pouze pro informační účely. Zobrazit specifikaci produktu

please use latin characters

MULTILIFT COLUMNS

MULTILIFT COLUMNS

MAIN FEATURES

  • Highly efficient DC electric motor
  • Integrated limit switches
  • The column has an internal lock,
  • that withstands even the maximum load

ADDITIONAL POSSIBILITIES

  • Use of a manual drive
  • Other stroke lengths available on request
  • Simultaneous control of up to 32 columns synchronized together
  • Use of internal (inside the column) or external drivers
  • Control of the column with a foot or hand remote control with a simple or advanced range of operation

GENERAL INFORMATION

Type Multilift/Multilift S
Installation position each position/suspended with fall protection provided by customer
Pushing force 1000 N – 3000 N
Pulling force 1000 N (only in conjunction with factory-fitted base plate)
speed 8 mm/s - 16 mm/s
Voltage 24 V DC
Power consumption 120 W
Level of security IP 20 / IP10 for version B (with milled groove)
Self-locking 1000 N – 3000 N
Ambient temperature +5°C do +40°C
Movement during synchronous operation from 0-2mm to 0-4mm
Jump 355 mm – 498 mm
Duty Cycle at 10% nominal load (max. 2 min working time, 18 min idle time)
Méně
Přečtěte si více

Zašlete dotaz

Máte zájem o tento produkt? Potřebujete další informace nebo individuální ceny?

Kontaktujte nás
ZEPTEJTE SE O PRODUKT close
Děkujeme za zaslání zprávy. Odpovíme co nejdříve.
ZEPTEJTE SE O PRODUKT close
Procházet
pošlete dotaz

Přidat do seznamu přání

musíš být přihlášen

MULTILIFT COLUMNS

MAIN FEATURES

  • Highly efficient DC electric motor
  • Integrated limit switches
  • The column has an internal lock,
  • that withstands even the maximum load

ADDITIONAL POSSIBILITIES

  • Use of a manual drive
  • Other stroke lengths available on request
  • Simultaneous control of up to 32 columns synchronized together
  • Use of internal (inside the column) or external drivers
  • Control of the column with a foot or hand remote control with a simple or advanced range of operation

GENERAL INFORMATION

Type Multilift/Multilift S
Installation position each position/suspended with fall protection provided by customer
Pushing force 1000 N – 3000 N
Pulling force 1000 N (only in conjunction with factory-fitted base plate)
speed 8 mm/s - 16 mm/s
Voltage 24 V DC
Power consumption 120 W
Level of security IP 20 / IP10 for version B (with milled groove)
Self-locking 1000 N – 3000 N
Ambient temperature +5°C do +40°C
Movement during synchronous operation from 0-2mm to 0-4mm
Jump 355 mm – 498 mm
Duty Cycle at 10% nominal load (max. 2 min working time, 18 min idle time)
Méně
Přečtěte si více
Komentáře (0)