Musíte být přihlášen
-
moreX
-
All categories
-
-
Category
-
Polovodiče
- LED diody
- Tyristory
- Elektroizolační moduly
- Přemosťovací usměrňovače
-
Tranzistory
- Tranzistory | GeneSiC
- SiC MOSFET moduly | Mitsubishi
- SiC MOSFET moduly | STARPOWER
- Moduly ABB SiC MOSFET
- Moduly IGBT | MITSUBISHI
- Tranzistorové moduly | MITSUBISHI
- Moduly MOSFET | MITSUBISHI
- Tranzistorové moduly | ABB
- Moduly IGBT | POWEREX
- Moduly IGBT | INFINEON (EUPEC)
- Polovodičové prvky z karbidu křemíku (SiC)
- Go to the subcategory
- Ovladače brány
- Bloky napájení
- Go to the subcategory
-
Měniče proudu a napětí LEM
-
Měniče proudu | LEM
- Proudový převodník s uzavřenou zpětnou vazbou (C / L)
- Měnič proudu s otevřenou zpětnou vazbou (O / L)
- Měnič proudu napájený unipolárním napětím
- Převodníky v technologii Eta
- Vysoce přesné měniče proudu řady LF xx10
- Měniče proudu řady LH
- HOYS a HOYL - určené pro přímou montáž na vodičovou lištu
- Měniče proudu v technologii SMD řady GO-SME a GO-SMS
- AUTOMOTIVE převodníky proudu
- Go to the subcategory
- Převodníky napětí | LEM
- Převodníky pro ochranu, monitorování a řízení LEM
- Dvoujádrové převodníky | LEM
- Precision Current Transducers | LEM
- Go to the subcategory
-
Měniče proudu | LEM
-
Pasivní součásti (kondenzátory, rezistory, pojistky, filtry)
- Rezistory
-
Pojistky
- Miniaturní pojistky pro elektronické obvody řady ABC a AGC
- Trubkové rychle působící pojistky
- Pojistkové vložky s časovým zpožděním s charakteristikami GL / GG a AM
- Ultrarychlé pojistkové články
- Rychle působící pojistky (britský a americký standard)
- Rychle působící pojistky (evropský standard)
- Pojistky pojezdu
- Pojistkové vložky vysokého napětí
- Go to the subcategory
-
Kondenzátory
- Motorové kondenzátory
- Elektrolytické kondenzátory
- Filmové kondenzátory
- Výkonové kondenzátory
- Kondenzátory pro stejnosměrné obvody
- Kondenzátory korekce účiníku
- Vysokonapěťové kondenzátory
- Indukční topné kondenzátory
- Kondenzátory pulsu a energie
- DC LINK kondenzátory
- Kondenzátory pro AC / DC obvody
- Go to the subcategory
- EMI filtry
- Superkondenzátory
- Přepěťová ochrana
- Go to the subcategory
-
Relé a stykače
- Teorie relé a stykačů
- 3fázová střídavá polovodičová relé
- 3fázová střídavá polovodičová relé
- Regulátory, ovládací prvky a příslušenství
- Měkké spouštění a reverzační stykače
- Elektromechanická relé
- Stykače
- Otočné spínače
-
Jednofázová střídavá polovodičová relé
- Jednofázová střídavá polovodičová relé, 1 řada | D2425 | D2450
- Jednofázová střídavá polovodičová relé řady CWA a CWD
- Jednofázová střídavá polovodičová relé řady CMRA a CMRD
- Jednofázová střídavá polovodičová relé řady PS
- Dvojitá a čtyřnásobná střídavá polovodičová relé řady D24 D, TD24 Q, H12D48 D.
- Jednofázová polovodičová relé řady GN
- Jednofázová střídavá polovodičová relé řady CKR
- Jednofázová AC relé na lištu DIN řady ERDA A ERAA
- Jednofázová AC relé pro proud 150 A.
- Dvojitá polovodičová relé integrovaná s chladičem pro lištu DIN
- Go to the subcategory
- Jednofázová AC polovodičová relé pro PCB
- Relé rozhraní
- Go to the subcategory
- Jádra a další indukční součásti
- Radiátory, varistory, tepelné ochrany
- Fanoušci
- Klimatizace, příslušenství pro elektrické skříně, chladiče
-
Baterie, nabíječky, vyrovnávací zdroje a střídače
- Baterie, nabíječky - teoretický popis
- Lithium-iontové baterie. Vlastní baterie. Systém správy baterií (BMS)
- Baterie
- Nabíječky baterií a příslušenství
- Záložní zdroj UPS a vyrovnávací napájecí zdroje
- Převaděče a příslušenství pro fotovoltaiku
- Úschovna energie
- Palivové články
- Lithium-iontové baterie
- Go to the subcategory
-
Automatika
- Koncové spínače, mikrospínače
- Senzory, převodníky
- Pyrometrie
- Počítadla, časovače, panelové měřiče
- Průmyslová ochranná zařízení
- Světelná a zvuková signalizace
- Termovizní kamera
- LED displeje
- Tlačítka a spínače
-
Zapisovače
- Zapisovač AL3000
- Rekordér KR2000
- Rekordér KR5000
- Měřič HN-CH s funkcí registrace vlhkosti a teploty
- Spotřební materiál pro zapisovače
- Rekordér 71VR1
- Zapisovač KR 3000
- Počítačové rekordéry řady R1M
- Počítačové rekordéry řady R2M
- PC rekordér, 12 izolovaných vstupů - RZMS-U9
- PC rekordér, USB, 12 izolovaných vstupů - RZUS
- Go to the subcategory
- Ovladače a panely
- Go to the subcategory
-
Kabely, dráty, vodiče, flexibilní připojení
- dráty
- lanka
- Kabely pro speciální aplikace
- košile
-
prýmky
- prýmky byt
- prýmky kolo
- Velmi flexibilní opletení - plochý
- Velmi flexibilní opletení - Round
- Měď opletené válcové
- Mědí štít a válcové
- Flexibilní zemnící pásky
- Opletení válcovité pozinkované a nerezové oceli
- PVC izolované měděné pletivo - teplota 85 ° C
- Ploché pletené hliníkové
- Connection Kit - prýmky a trubky
- Go to the subcategory
- Příslušenství pro trakční
- kabelové botky
- Ohebné izolované přípojnice
- Vícevrstvá ohebná lišta
- Systémy vedení kabelů
- Potrubí, trubky
- Go to the subcategory
- View all categories
-
Polovodiče
-
-
- Suppliers
-
Applications
- AC a DC pohony (střídače)
- Automatizace HVAC
- CNC obráběcí stroje
- Indukční ohřev
- Komponenty pro prostředí s nebezpečím výbuchu (EX)
- Měření a regulace teploty
- Měření a regulace teploty
- Motory a transformátory
- Napájecí zdroje (UPS) a usměrňovací systémy
- Průmyslová automatizace
- Průmyslová automatizace
- Průmyslová ochranná zařízení
- Stroje na sušení a zpracování dřeva
- Stroje na tvarování plastů za tepla
- Svařovací stroje a svářecí stroje
- Těžba, hutnictví a slévárenství
- Tisk
- Tramvajová a železniční trakce
- Zařízení pro distribuční, řídicí a telekomunikační skříně
-
SERVIS, OPRAVY
-
-
Instalace zařízení
-
- Kontakt
- Zobacz wszystkie kategorie
Fotografie slouží pouze pro informační účely. Zobrazit specifikaci produktu
please use latin characters
Microprocessor controlled Blue Power Charger
- Protection category IP67
- Fanless cooling
- Advanced charge algorithm
- LED status indication
- High efficiency
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Power IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.
Start interrupt
The models with suffix (1+Si) feature a second current limited output which is always powered as long as 180 – 265 VAC is present on the input. This output can for example be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function).
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat.
And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 4-stage charge algorithm: bulk – absorption – float – storage
The Blue Power Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)
Green LED: power on
Blue Power charger IP67 |
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
---|---|---|---|---|---|---|---|
Input voltage range and frequency | 180-265 VAC 45-65 Hz | ||||||
Efficiency | 93% | 93% | 95% | 95% | 94% | 96% | 96% |
No load power consumption (W) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Charge voltage 'absorption' (V DC) | 14,4 | 14,4 | 14,4 | 14,4 | 28,8 | 28,8 | 28,8 |
Charge voltage 'float' (V DC) | 13,7 | 13,7 | 13,7 | 13,7 | 27,6 | 27,6 | 27,6 |
Charge voltage 'storage' (V DC) | 13,2 | 13,2 | 13,2 | 13,2 | 26,4 | 26,4 | 26,4 |
Charge current (A) | 7 | 13 | 17 | 25 | 5 | 8 | 12 |
Charge algorithm | 4-stage adaptive | ||||||
Can be used as power supply | yes | ||||||
Protection | Battery reverse polarity (fuse) Output short circuit Over temperature | ||||||
Operating temp. range | -20 to +60°C (full rated output up to 40°C) | ||||||
Humidity | Up to 100% | ||||||
Start interrupt option (Si) | Short circuit proof, current limit 0,5 A Output voltage: max one volt lower than main output | ||||||
ENCLOSURE | |||||||
Material [&] Colour | aluminium (blue RAL 5012) | ||||||
Battery-connection | Black and red cable of 1,5 meter | ||||||
230 V AC-connection | Cable of 1,5 meter with CEE 7/7 plug | ||||||
Protection category | IP67 | ||||||
Weight (kg) | 1,8 | 1,8 | 2,4 | 2,4 | 1,8 | 2,4 | 2,4 |
Dimensions (h x w x d in mm) | 85 x 211 x 60 | 85 x 211 x 60 | 99 x 219 x 65 | 99 x 219 x 65 | 85 x 211 x 60 | 99 x 219 x 65 | 99 x 219 x 65 |
STAINDARDS | |||||||
Safety | EN 60335-1, EN 60335-2-29 | ||||||
Emission Immunity | EN 55014-1, EN 61000-6-3, EN 61000-3-2 | ||||||
Automotive Directive | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
Zašlete dotaz
Máte zájem o tento produkt? Potřebujete další informace nebo individuální ceny?
Kontaktujte nás
musíš být přihlášen
Microprocessor controlled Blue Power Charger
- Protection category IP67
- Fanless cooling
- Advanced charge algorithm
- LED status indication
- High efficiency
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Power IP67 Charger. The casing is made of cast aluminium and the electronics are moulded in resin.
Start interrupt
The models with suffix (1+Si) feature a second current limited output which is always powered as long as 180 – 265 VAC is present on the input. This output can for example be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function).
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat.
And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 4-stage charge algorithm: bulk – absorption – float – storage
The Blue Power Charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)
Green LED: power on
Blue Power charger IP67 |
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
Blue Power
|
---|---|---|---|---|---|---|---|
Input voltage range and frequency | 180-265 VAC 45-65 Hz | ||||||
Efficiency | 93% | 93% | 95% | 95% | 94% | 96% | 96% |
No load power consumption (W) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Charge voltage 'absorption' (V DC) | 14,4 | 14,4 | 14,4 | 14,4 | 28,8 | 28,8 | 28,8 |
Charge voltage 'float' (V DC) | 13,7 | 13,7 | 13,7 | 13,7 | 27,6 | 27,6 | 27,6 |
Charge voltage 'storage' (V DC) | 13,2 | 13,2 | 13,2 | 13,2 | 26,4 | 26,4 | 26,4 |
Charge current (A) | 7 | 13 | 17 | 25 | 5 | 8 | 12 |
Charge algorithm | 4-stage adaptive | ||||||
Can be used as power supply | yes | ||||||
Protection | Battery reverse polarity (fuse) Output short circuit Over temperature | ||||||
Operating temp. range | -20 to +60°C (full rated output up to 40°C) | ||||||
Humidity | Up to 100% | ||||||
Start interrupt option (Si) | Short circuit proof, current limit 0,5 A Output voltage: max one volt lower than main output | ||||||
ENCLOSURE | |||||||
Material [&] Colour | aluminium (blue RAL 5012) | ||||||
Battery-connection | Black and red cable of 1,5 meter | ||||||
230 V AC-connection | Cable of 1,5 meter with CEE 7/7 plug | ||||||
Protection category | IP67 | ||||||
Weight (kg) | 1,8 | 1,8 | 2,4 | 2,4 | 1,8 | 2,4 | 2,4 |
Dimensions (h x w x d in mm) | 85 x 211 x 60 | 85 x 211 x 60 | 99 x 219 x 65 | 99 x 219 x 65 | 85 x 211 x 60 | 99 x 219 x 65 | 99 x 219 x 65 |
STAINDARDS | |||||||
Safety | EN 60335-1, EN 60335-2-29 | ||||||
Emission Immunity | EN 55014-1, EN 61000-6-3, EN 61000-3-2 | ||||||
Automotive Directive | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |