

Category
Фотографии предназначены только для информационных целей. Посмотреть спецификацию продукта
please use latin characters
The conductive adhesive is supplied as a paste that does not require mixing. It achieves its properties at room temperature.
The surface to be bonded must be clean, dry, and degreased with common solvents used for substrate cleaning, such as acetone, methyl ethyl ketone, xylene, and isopropyl alcohol. The adhesive should be applied directly to the cleaned surface. If the product is to be used as a binder, it should be evenly spread on both surfaces and held pressed until it sets. The full conductive and sealing properties of the conductive adhesive are achieved after the full drying time.
WARNING! Contact of the adhesive with eyes or skin may be irritating. In such cases, excess adhesive should be wiped off with a dry cloth or towel and hands washed with industrial cleaning products designed for this purpose (e.g., paste).
Uncured conductive silicone adhesive can be removed with, for example, acetone.
The storage period for both unopened and opened adhesive is one (1) year from the shipping date, provided that the products are stored in a dry, tightly closed, original container below 23°C (73.4°F).
Unit | NG nickel-graphite |
SPG silver-glass |
SNK silver-nickel |
SPA silver-aluminum |
SPC silver-copper |
S pure silver |
|
---|---|---|---|---|---|---|---|
Color | Dark gray | Light brown | Brown | Blue | Dark brown | Brown | |
Consistency | Thick paste | Thick paste | Thick paste | Thick paste | Thick paste | Thick paste | |
Specific Gravity (typical) | g/cm3 | 2.3 | 1.82 | 3.58 | 1.86 | 3.58 | 4.2 |
Hardness (+/-5) | Shore A | 65 | 70 | 75 | 68 | 70 | 65 |
Resistance (Max) | Ohm -cm | 0.1 | 0.01 | 0.008 | 0.01 | 0.008 | 0.005 |
Shear Strength (minimum) | PSI | 70 | 120 | 120 | 175 | 200 | 225 |
Operating Temperature | °C | -0.25 | -0.25 | -0.25 | -0.25 | -0.25 | -0.25 |
Tack Time | Min | 15 | 15 | 15 | 15 | 15 | 15 |
Viscosity Time | Min | 45 | 90 | 90 | 90 | 90 | 90 |
Time after which bonded element can be used | hours | 24-24 | 24-24 | 24-24 | 24-24 | 24-24 | 24-24 |
Full Cure Time | hours | 72-144 | 72-144 | 72-144 | 72-144 | 72-144 | 72-144 |
Tensile Strength (minimum) | PSI | 250 | 250 | 250 | 200 | 250 | 250 |
Elongation (minimum) | % | 30 | 35 | 35 | 35 | 40 | 35 |
SOL - O8 - XX - 2.5
XX - NG, SPG, SNK, SPA, SPC, S (choice available).
In our offer, you will also find stainless steel enclosures.
Вы заинтересованы в этом продукте? Вам нужна дополнительная информация или индивидуальные расценки?
Вы должны быть зарегистрированы
The conductive adhesive is supplied as a paste that does not require mixing. It achieves its properties at room temperature.
The surface to be bonded must be clean, dry, and degreased with common solvents used for substrate cleaning, such as acetone, methyl ethyl ketone, xylene, and isopropyl alcohol. The adhesive should be applied directly to the cleaned surface. If the product is to be used as a binder, it should be evenly spread on both surfaces and held pressed until it sets. The full conductive and sealing properties of the conductive adhesive are achieved after the full drying time.
WARNING! Contact of the adhesive with eyes or skin may be irritating. In such cases, excess adhesive should be wiped off with a dry cloth or towel and hands washed with industrial cleaning products designed for this purpose (e.g., paste).
Uncured conductive silicone adhesive can be removed with, for example, acetone.
The storage period for both unopened and opened adhesive is one (1) year from the shipping date, provided that the products are stored in a dry, tightly closed, original container below 23°C (73.4°F).
Unit | NG nickel-graphite |
SPG silver-glass |
SNK silver-nickel |
SPA silver-aluminum |
SPC silver-copper |
S pure silver |
|
---|---|---|---|---|---|---|---|
Color | Dark gray | Light brown | Brown | Blue | Dark brown | Brown | |
Consistency | Thick paste | Thick paste | Thick paste | Thick paste | Thick paste | Thick paste | |
Specific Gravity (typical) | g/cm3 | 2.3 | 1.82 | 3.58 | 1.86 | 3.58 | 4.2 |
Hardness (+/-5) | Shore A | 65 | 70 | 75 | 68 | 70 | 65 |
Resistance (Max) | Ohm -cm | 0.1 | 0.01 | 0.008 | 0.01 | 0.008 | 0.005 |
Shear Strength (minimum) | PSI | 70 | 120 | 120 | 175 | 200 | 225 |
Operating Temperature | °C | -0.25 | -0.25 | -0.25 | -0.25 | -0.25 | -0.25 |
Tack Time | Min | 15 | 15 | 15 | 15 | 15 | 15 |
Viscosity Time | Min | 45 | 90 | 90 | 90 | 90 | 90 |
Time after which bonded element can be used | hours | 24-24 | 24-24 | 24-24 | 24-24 | 24-24 | 24-24 |
Full Cure Time | hours | 72-144 | 72-144 | 72-144 | 72-144 | 72-144 | 72-144 |
Tensile Strength (minimum) | PSI | 250 | 250 | 250 | 200 | 250 | 250 |
Elongation (minimum) | % | 30 | 35 | 35 | 35 | 40 | 35 |
SOL - O8 - XX - 2.5
XX - NG, SPG, SNK, SPA, SPC, S (choice available).
In our offer, you will also find stainless steel enclosures.
Не удаётся отправить вашу оценку отзыва
Пожаловаться на комментарий
Жалоба отправлена
Не удаётся отправить вашу жалобу
Оставьте свой отзыв
Отзыв отправлен
Не удаётся отправить отзыв