Anaerob ragasztók
Anaerob ragasztók
Anaerob ragasztók
Anaerob ragasztók
Anaerob ragasztók
Anaerob ragasztók

A fényképek csak tájékoztató jellegűek. Lásd a termék specifikációit

Kérjük, használjon latin karaktereket

Gyártó: BÄDER GMBH & CO. KG

Anaerob ragasztók

1. Greenmark®

2. Comparison of our thread locking compounds

2.1 Technical data

3. B222 Eco – Low-strength thread locking compound

3.1 Overview

3.2 Technical data

3.3 Application information

4. B243 Eco – Medium-strength thread locking compound

4.1 Overview

4.2 Technical data

4.3 Application information

5. B270 Eco - High-strength thread locking compound

5.1 Overview

5.2 Technical data

5.3 Application information

6. B577 Eco – Medium-strength thread sealant

6.1 Overview

6.2 Technical data

6.3 Application information

7. Disclaimer

1. Greenmark®

The Greenmark® sub-brand includes all marking systems of

Lackfabrik Bäder GmbH & Co. KG that are not hazardous substances and have a particularly gentle impact on people and the environment. This is the result of a strategic decision by Bäder® to largely rely on the high performance of water-based marking systems for new solutions and thus significantly improve the ecological footprint. The zero range marks the beginning and will be supplemented by further high-performance systems this year and next.

  • Properties of all Greenmark® products
  • No HAPs
  • No hazardous goods
  • Isolation
  • Good media resistance

2. Comparison of our thread locking compounds

2.1 Technical data

Uncured product B222 Eco - low-strength B243 Eco - medium-strength B270 Eco - high-strength
Chemical base Modified acrylate Modified acrylate Modified acrylate
Viscosity* 800 - 1500 mPas 1500 - 4000 mPas 300 - 900 mPas
Density** 1.08 - 1.10 g/ml 1.08 - 1.10 g/ml 1.09 - 1.13 g/ml
Flash point*** > 65 °C > 65 °C > 65 °C
Working temperature 10 - 40 °C 10 - 40 °C 10 - 40 °C
Max. screw size M36 M36 M20
Cured product
Breakaway torque 5.5 - 11.5 Nm 15 - 25 Nm >35 Nm
Temperature application range -55 - 180 °C -55 - 180 °C -55 - 180 °C
Curing properties
Tangible after approx. 5 - 15 min approx. 5 - 15 min approx. 5 - 15 min
Functional strength approx. 3 -6 h approx. 3 -6 h approx. 3 -6 h
Final strength approx. 12 - 24 h approx. 12 - 24 h approx. 12 - 24 h

* At 25°C, Brookfield viscometer.
** Measured according to DIN 53217, part 2 Density ball model 475/III
*** Measured according to DIN 51755

3. B222 Eco - Low-strength thread locking compound

3.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and through the catalytic action of metal (contact with metal). B222 Eco seals and locks many types of screws and connections.

Properties

  • Fast curing on a wide range of ferrous metals
  • High vibration resistance
  • Secured screws, easy to disassemble using tools
  • High compatibility with oils

Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition, they offer a longer shelf life of 24 instead of 12 months, improved storage stability for the user, as well as increased temperature resistance in use up to +180°C.
Available containers and maximum screw sizes.

Container Max screw diameter
10mm bottle M36

Colors and item numbers

Color RAL Part NO
Purple, fluorescent - #73300

3.2 Technical data

Uncured product

Chemical base Modified acrylate
Viscosity* 800 - 1500 mPas
Density** 1.08 - 1.10 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

* At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque 5.5 - 11.5 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 -6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the tightly closed original container. Storage at higher temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

3.3 Application information

Low-strength thread locking compounds are not suitable for: metal-plastic flange connections, in areas where open oxygen is used, and sealing against media with strongly oxidizing acids. The product may only be used on standard metal threads. The surface to be secured must be grease-free and completely clean. Then use the thread locking compound to completely fill the gap between both parts, assemble the parts and seal them completely. Insufficient sealing may cause leakage after some time. Do not move parts after the curing process has started Leave the adhesive to cure completely for 24 hours before operation. In series production, the bonding should be blocked or secured with a pipe wrench to avoid interrupting the layer already in the curing process. Before using the product, please read the safety data sheet.

4. B243 Eco - Medium-strength thread locking compound

4.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and through the catalytic action of metal (contact with metal). B243 Eco medium strength seals and locks many types of screws and connections.

Properties

  • DVGW certification (DIN EN 751-1 class H)
  • Fast curing on a wide range of ferrous metals
  • High vibration resistance
  • Secured screws that are moderately difficult to disassemble using tools
  • Increased compatibility with oils

Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition, they offer a longer shelf life of 24 instead of 12 months, improved storage stability for the user, as well as increased temperature resistance in use up to +180°C.
Available containers and maximum screw sizes.

Available containers and maximum screw sizes

Container Max. screw size
10 ml bottle M36
50 ml bottle M36

Colors and item numbers

Color RAL Part NO
Blue, fluorescent - #12000

4.2 Technical data

Chemical base Modified acrylate
Viscosity* 1500 - 4000 mPas
Density** 1.08 - 1.10 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

*At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque 15 - 25 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 -6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the tightly closed original container. Storage at higher temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

4.3 Application information

Medium-strength thread locking compounds are not suitable for: metal-plastic flange connections, in areas where open oxygen is used, and sealing against media with strongly oxidizing acids. The product may only be used on standard metal threads. The surface to be secured must be grease-free and completely clean. Then use the thread locking compound to completely fill the gap between both parts, assemble the parts and seal them completely. Insufficient sealing may cause leakage after some time. Do not move parts after the curing process has started

Before operation, leave the adhesive to cure completely for 24 hours. In series production, the bonding should be blocked or secured with a pipe wrench to avoid interrupting the layer already in the curing process. Before using the product, please read the safety data sheet.

5. B270 Eco - High-strength thread locking compound

5.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and through the catalytic action of metal (contact with metal). B270 Eco seals and locks many types of screws and connections.

Properties

Securing screws in delivery condition, even with minor contamination ͅ Securing double-ended screws and ball and roller bearings that no longer need to be loosened ͅ Particularly suitable for heavily loaded screw connections Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition, they offer a longer shelf life of 24 instead of 12 months, improved storage stability for the user, as well as increased temperature resistance in use up to +180°C.

Available containers and maximum screw sizes

Container Max. screw size
10 ml bottle M20
50 ml bottle M20

Colors and item numbers

Color RAL Part No.
Green, fluorescent - #75000

5.2 Technical data

Uncured product

Chemical base Modified acrylate
Viscosity* 300 - 900 mPas
Density** 11.09 - 1.13 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

* At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque > 35 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 -6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the tightly closed original container. Higher storage temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

5.3 Application information

High-strength thread locking compounds are not suitable for: metal-plastic flange connections, in areas where gaseous oxygen is used, and sealing against media with strongly oxidizing acids.

The product may only be used on standard metal threads. The surface to be secured must be grease-free and completely clean. Then use the thread locking compound to completely fill the gap between both parts, assemble the parts and seal them completely. Insufficient sealing may cause leakage after some time. Do not move parts after the curing process has started

Before operation, leave the adhesive to cure completely for 24 hours. In series production, the bonding should be blocked or secured with a pipe wrench to avoid interrupting the layer already in the curing process. Before using the product, please read the safety data sheet.

6. B577 Eco – Medium-strength thread sealant

6.1 Overview

The product cures (polymerizes) in the absence of atmospheric oxygen (anaerobic) and under the catalytic action of metal (contact with metal). B577 Eco medium strength seals and locks many types of threaded seals and screw connections.

Properties

  • Seals tapered/cylindrical pipe thread connections up to M80 (R3"), e.g. sprinkler systems and gas systems
  • Screw connections can be loosened using tools
  • Resistant to vibrations and other loads

Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition to a longer shelf life of 24 instead of 12 months, they also offer the user better storage stability and increased temperature resistance up to +180° C during use.

Container, item number and maximum screw sizes

Container Item number Screw sizes
10 ml bottle #72000-TF.01 M80
Accordion bottle #72000-TF.05 M80

Color

Name RAL
Yellow, fluorescent -

6.2 Technical data

Uncured product

Chemical base Modified acrylate
Viscosity* 20,000 - 40,000 mPas
Density** 1.09 - 1.13 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

*At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque 20-30 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 - 6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the original sealed packaging. Higher storage temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

6.3 Application information

The medium-strength thread sealant B577 Eco is not suitable for: metal-plastic flange connections, in areas where gaseous oxygen is used, and for sealing against media containing strongly oxidizing acids.

The product should only be used on standard metal threads. The affected surface must be free of grease and completely clean. Then completely fill the gap between the two parts with the thread sealant, assemble the parts and seal them completely. Insufficient sealing may lead to leakage after some time. Do not move after the curing process has started.

Before operation, wait 24 hours for the bond to cure completely. In series production, use pipe pliers to block or secure the bond to prevent cracking of the layer that is already in the curing process. Before using the product, please read the safety data sheet.

7. Disclaimer

The above information contained in this technical data sheet (TDS), and specific suggestions regarding processing and scope of application of our products are based on our current knowledge and experience. Due to the various possibilities of application and use and operating conditions independent of us, we do not assume any responsibility for the suitability of our products for appropriate purposes production processes under specific operating conditions as well as intended processing purposes and results. To ensure such suitability, we recommend in each case to perform trials and tests before final application.

Any liability arising from the instructions contained in these technical data sheets and any other written or oral advice regarding the presented product is excluded, unless otherwise agreed in an individual Agreement, in case of endangerment of life, or health, in the case of intentional action or gross negligence on our part or in the case of liability according to mandatory product liability regulations.

The data contained in this document is for informational purposes only and is considered reliable according to our best knowledge. However, we cannot accept responsibility for results obtained by others over which methods, over which we have no influence. It is the user's obligation to determine the suitability of any listed production methods herein for their purposes and to take all precautionary measures indicated to protect property and persons from hazards that may be associated with the handling and use of these products. Therefore, Lackfabrik Bäder GmbH & Co. KG expressly disclaims any liability any warranty, express or implied, arising from the sale or use of products manufactured by Lackfabrik Bäder GmbH & Co. KG products, including any warranties and warranties of fitness for a particular purpose. In particular, Lackfabrik Bäder GmbH & Co. KG disclaims all liability for consequential or indirect damages of any kind, including lost profits.

Kevésbé
Olvass tovább

Ajánlatkérés küldése

Érdekel ez a termék? További információra vagy egyedi árajánlatra van szüksége?

Lépjen kapcsolatba velünk
Kérdezzen a termékről close
Köszönjük az üzenetét Amint lehet, válaszolunk
Kérdezzen a termékről close
Böngésszen
Kérelem beküldése

Add to wishlist

Musisz być zalogowany/a

1. Greenmark®

2. Comparison of our thread locking compounds

2.1 Technical data

3. B222 Eco – Low-strength thread locking compound

3.1 Overview

3.2 Technical data

3.3 Application information

4. B243 Eco – Medium-strength thread locking compound

4.1 Overview

4.2 Technical data

4.3 Application information

5. B270 Eco - High-strength thread locking compound

5.1 Overview

5.2 Technical data

5.3 Application information

6. B577 Eco – Medium-strength thread sealant

6.1 Overview

6.2 Technical data

6.3 Application information

7. Disclaimer

1. Greenmark®

The Greenmark® sub-brand includes all marking systems of

Lackfabrik Bäder GmbH & Co. KG that are not hazardous substances and have a particularly gentle impact on people and the environment. This is the result of a strategic decision by Bäder® to largely rely on the high performance of water-based marking systems for new solutions and thus significantly improve the ecological footprint. The zero range marks the beginning and will be supplemented by further high-performance systems this year and next.

  • Properties of all Greenmark® products
  • No HAPs
  • No hazardous goods
  • Isolation
  • Good media resistance

2. Comparison of our thread locking compounds

2.1 Technical data

Uncured product B222 Eco - low-strength B243 Eco - medium-strength B270 Eco - high-strength
Chemical base Modified acrylate Modified acrylate Modified acrylate
Viscosity* 800 - 1500 mPas 1500 - 4000 mPas 300 - 900 mPas
Density** 1.08 - 1.10 g/ml 1.08 - 1.10 g/ml 1.09 - 1.13 g/ml
Flash point*** > 65 °C > 65 °C > 65 °C
Working temperature 10 - 40 °C 10 - 40 °C 10 - 40 °C
Max. screw size M36 M36 M20
Cured product
Breakaway torque 5.5 - 11.5 Nm 15 - 25 Nm >35 Nm
Temperature application range -55 - 180 °C -55 - 180 °C -55 - 180 °C
Curing properties
Tangible after approx. 5 - 15 min approx. 5 - 15 min approx. 5 - 15 min
Functional strength approx. 3 -6 h approx. 3 -6 h approx. 3 -6 h
Final strength approx. 12 - 24 h approx. 12 - 24 h approx. 12 - 24 h

* At 25°C, Brookfield viscometer.
** Measured according to DIN 53217, part 2 Density ball model 475/III
*** Measured according to DIN 51755

3. B222 Eco - Low-strength thread locking compound

3.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and through the catalytic action of metal (contact with metal). B222 Eco seals and locks many types of screws and connections.

Properties

  • Fast curing on a wide range of ferrous metals
  • High vibration resistance
  • Secured screws, easy to disassemble using tools
  • High compatibility with oils

Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition, they offer a longer shelf life of 24 instead of 12 months, improved storage stability for the user, as well as increased temperature resistance in use up to +180°C.
Available containers and maximum screw sizes.

Container Max screw diameter
10mm bottle M36

Colors and item numbers

Color RAL Part NO
Purple, fluorescent - #73300

3.2 Technical data

Uncured product

Chemical base Modified acrylate
Viscosity* 800 - 1500 mPas
Density** 1.08 - 1.10 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

* At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque 5.5 - 11.5 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 -6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the tightly closed original container. Storage at higher temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

3.3 Application information

Low-strength thread locking compounds are not suitable for: metal-plastic flange connections, in areas where open oxygen is used, and sealing against media with strongly oxidizing acids. The product may only be used on standard metal threads. The surface to be secured must be grease-free and completely clean. Then use the thread locking compound to completely fill the gap between both parts, assemble the parts and seal them completely. Insufficient sealing may cause leakage after some time. Do not move parts after the curing process has started Leave the adhesive to cure completely for 24 hours before operation. In series production, the bonding should be blocked or secured with a pipe wrench to avoid interrupting the layer already in the curing process. Before using the product, please read the safety data sheet.

4. B243 Eco - Medium-strength thread locking compound

4.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and through the catalytic action of metal (contact with metal). B243 Eco medium strength seals and locks many types of screws and connections.

Properties

  • DVGW certification (DIN EN 751-1 class H)
  • Fast curing on a wide range of ferrous metals
  • High vibration resistance
  • Secured screws that are moderately difficult to disassemble using tools
  • Increased compatibility with oils

Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition, they offer a longer shelf life of 24 instead of 12 months, improved storage stability for the user, as well as increased temperature resistance in use up to +180°C.
Available containers and maximum screw sizes.

Available containers and maximum screw sizes

Container Max. screw size
10 ml bottle M36
50 ml bottle M36

Colors and item numbers

Color RAL Part NO
Blue, fluorescent - #12000

4.2 Technical data

Chemical base Modified acrylate
Viscosity* 1500 - 4000 mPas
Density** 1.08 - 1.10 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

*At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque 15 - 25 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 -6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the tightly closed original container. Storage at higher temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

4.3 Application information

Medium-strength thread locking compounds are not suitable for: metal-plastic flange connections, in areas where open oxygen is used, and sealing against media with strongly oxidizing acids. The product may only be used on standard metal threads. The surface to be secured must be grease-free and completely clean. Then use the thread locking compound to completely fill the gap between both parts, assemble the parts and seal them completely. Insufficient sealing may cause leakage after some time. Do not move parts after the curing process has started

Before operation, leave the adhesive to cure completely for 24 hours. In series production, the bonding should be blocked or secured with a pipe wrench to avoid interrupting the layer already in the curing process. Before using the product, please read the safety data sheet.

5. B270 Eco - High-strength thread locking compound

5.1 Overview

The product cures (polymerizes) without access to air and oxygen (anaerobic) and through the catalytic action of metal (contact with metal). B270 Eco seals and locks many types of screws and connections.

Properties

Securing screws in delivery condition, even with minor contamination ͅ Securing double-ended screws and ball and roller bearings that no longer need to be loosened ͅ Particularly suitable for heavily loaded screw connections Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition, they offer a longer shelf life of 24 instead of 12 months, improved storage stability for the user, as well as increased temperature resistance in use up to +180°C.

Available containers and maximum screw sizes

Container Max. screw size
10 ml bottle M20
50 ml bottle M20

Colors and item numbers

Color RAL Part No.
Green, fluorescent - #75000

5.2 Technical data

Uncured product

Chemical base Modified acrylate
Viscosity* 300 - 900 mPas
Density** 11.09 - 1.13 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

* At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque > 35 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 -6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the tightly closed original container. Higher storage temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

5.3 Application information

High-strength thread locking compounds are not suitable for: metal-plastic flange connections, in areas where gaseous oxygen is used, and sealing against media with strongly oxidizing acids.

The product may only be used on standard metal threads. The surface to be secured must be grease-free and completely clean. Then use the thread locking compound to completely fill the gap between both parts, assemble the parts and seal them completely. Insufficient sealing may cause leakage after some time. Do not move parts after the curing process has started

Before operation, leave the adhesive to cure completely for 24 hours. In series production, the bonding should be blocked or secured with a pipe wrench to avoid interrupting the layer already in the curing process. Before using the product, please read the safety data sheet.

6. B577 Eco – Medium-strength thread sealant

6.1 Overview

The product cures (polymerizes) in the absence of atmospheric oxygen (anaerobic) and under the catalytic action of metal (contact with metal). B577 Eco medium strength seals and locks many types of threaded seals and screw connections.

Properties

  • Seals tapered/cylindrical pipe thread connections up to M80 (R3"), e.g. sprinkler systems and gas systems
  • Screw connections can be loosened using tools
  • Resistant to vibrations and other loads

Compared to conventional anaerobic adhesives, Greenmark® products from Bäder® are completely label-free. In addition to a longer shelf life of 24 instead of 12 months, they also offer the user better storage stability and increased temperature resistance up to +180° C during use.

Container, item number and maximum screw sizes

Container Item number Screw sizes
10 ml bottle #72000-TF.01 M80
Accordion bottle #72000-TF.05 M80

Color

Name RAL
Yellow, fluorescent -

6.2 Technical data

Uncured product

Chemical base Modified acrylate
Viscosity* 20,000 - 40,000 mPas
Density** 1.09 - 1.13 g/ml
Flash point*** > 65 °C
Working temperature 10 - 40 °C

*At 25°C, Brookfield viscometer.
** Measured according to
DIN 53217, part 2 Density
ball model 475/III
*** Measured according to
DIN51755

Cured product

Breakaway torque 20-30 Nm
Temperature application range -55 - 180°C

Curing properties

Tangible after approx. 5 - 15 minutes
Functional strength approx. 3 - 6 hours
Final strength approx. 12 - 24 hours

Storage and shelf life

The shelf life is 24 months at optimal storage temperature between 5°C and 23°C in the original sealed packaging. Higher storage temperature leads to significantly shorter shelf life. Storage temperature must not fall below 5°C.

6.3 Application information

The medium-strength thread sealant B577 Eco is not suitable for: metal-plastic flange connections, in areas where gaseous oxygen is used, and for sealing against media containing strongly oxidizing acids.

The product should only be used on standard metal threads. The affected surface must be free of grease and completely clean. Then completely fill the gap between the two parts with the thread sealant, assemble the parts and seal them completely. Insufficient sealing may lead to leakage after some time. Do not move after the curing process has started.

Before operation, wait 24 hours for the bond to cure completely. In series production, use pipe pliers to block or secure the bond to prevent cracking of the layer that is already in the curing process. Before using the product, please read the safety data sheet.

7. Disclaimer

The above information contained in this technical data sheet (TDS), and specific suggestions regarding processing and scope of application of our products are based on our current knowledge and experience. Due to the various possibilities of application and use and operating conditions independent of us, we do not assume any responsibility for the suitability of our products for appropriate purposes production processes under specific operating conditions as well as intended processing purposes and results. To ensure such suitability, we recommend in each case to perform trials and tests before final application.

Any liability arising from the instructions contained in these technical data sheets and any other written or oral advice regarding the presented product is excluded, unless otherwise agreed in an individual Agreement, in case of endangerment of life, or health, in the case of intentional action or gross negligence on our part or in the case of liability according to mandatory product liability regulations.

The data contained in this document is for informational purposes only and is considered reliable according to our best knowledge. However, we cannot accept responsibility for results obtained by others over which methods, over which we have no influence. It is the user's obligation to determine the suitability of any listed production methods herein for their purposes and to take all precautionary measures indicated to protect property and persons from hazards that may be associated with the handling and use of these products. Therefore, Lackfabrik Bäder GmbH & Co. KG expressly disclaims any liability any warranty, express or implied, arising from the sale or use of products manufactured by Lackfabrik Bäder GmbH & Co. KG products, including any warranties and warranties of fitness for a particular purpose. In particular, Lackfabrik Bäder GmbH & Co. KG disclaims all liability for consequential or indirect damages of any kind, including lost profits.

Kevésbé
Olvass tovább

Related articles

Miért fontos a menetek zárolása? Miért fontos a menetek zárolása?
Posted in: Artykuły
21-11-2024
A menetek zárolása fontos elem a csatlakozások tartósságának biztosításában. Ebben a cikkben meghatározzuk a...
Read more
Mi az anaerob ragasztók? Mi az anaerob ragasztók?
Posted in: Baza Wiedzy, Artykuły
21-11-2024
Tudjon meg többet az anaerob ragasztókról, hogyan működnek és milyen előnyöket kínálnak kihívást jelentő...
Read more
¿Cómo elegir los productos para asegurar las roscas? ¿Cómo elegir los productos para asegurar las roscas?
Posted in: Baza Wiedzy, Artykuły
22-11-2024
A cikk arról szól, hogyan válasszuk ki a megfelelő menetrögzítő termékeket, beleértve az anaerob ragasztókat, rugós...
Read more
Hozzászólások (0)