A fényképek csak tájékoztató jellegűek. Lásd a termék specifikációit

Kérjük, használjon latin karaktereket

Gyártó: ALPER

Alper-005 Mirror Defoggers

  • Alper-005

The StopVapor mirror demister prevents condensation on the mirror surface during operation. It is suitable for use on mirrors in humid and windowless environments, such as gyms, swimming pools, hotels, and homes.

The Alper mirror demister is easy to install, thanks to its self-adhesive backing that adheres perfectly to the back of the mirror. Alper can customize the mirror heater to your specifications. StopVapor is also available in standard sizes to fit any square, rectangular, or round mirror.

Ensuring a Perfectly Clear Surface

The StopVapor bathroom mirror demister guarantees a perfectly clear mirror surface, matching the dimensions of the heating film used on the back of the mirror.

Easy to apply, the StopVapor mirror heating pad is self-adhesive: simply place it on the back of the mirror at the desired height after removing the adhesive backing.

Leave 1 cm between the wall and the mirror to allow for the power cable to pass through.

Standard Sizes of StopVapor Heaters

  • 16×28 cm 230V 8W
  • 28×28 cm 230V 16W
  • 41×28 cm 230V 24W
  • 40×40 cm 230V 30W
  • ø40 cm 230V 25W
  • ø50 cm 230V 40W
  • 50×50 cm 55W 230V
  • 101×44 cm 105W 230V
  • 100×60 cm 145W 230V

Alper can produce dimensions according to customer designs, even for single batches.

Specifications Technical

  • Maximum dimensions: 1000x600mm (different sizes available upon request).
  • Power and supply voltages upon request.
  • Excellent temperature uniformity.
  • Functionality without the use of thermal protection such as thermal fuses, thermal switches, probes, and sensors.
  • Application of a wide range of double-sided adhesives.
  • Cables according to customer specifications.
  • Class II and III design.
  • Power supply voltages 110/230/240V and low safety voltage 12/24/48V.
  • Customer-specific design.
  • Minimum temperature: 35-40°C.
  • Designed in accordance with Directive 2014/35/EU.

Compliance Tests and Regulations

Tests in accordance with standards EN 60335-1 and EN 50106.

Compliance with regulations S.I. 2016 No. 1101 (Electrical Equipment (Safety) Regulations 2016).

Complies with BS EN 60335-1, BS EN 50106.

UL E466385, VDE approvals upon request.

RoHS and REACH compliant.

Ajánlatkérés küldése

Érdekel ez a termék? További információra vagy egyedi árajánlatra van szüksége?

Lépjen kapcsolatba velünk
Kérdezzen a termékről close
Köszönjük az üzenetét Amint lehet, válaszolunk
Kérdezzen a termékről close
Böngésszen

Add to wishlist

Musisz być zalogowany/a

The StopVapor mirror demister prevents condensation on the mirror surface during operation. It is suitable for use on mirrors in humid and windowless environments, such as gyms, swimming pools, hotels, and homes.

The Alper mirror demister is easy to install, thanks to its self-adhesive backing that adheres perfectly to the back of the mirror. Alper can customize the mirror heater to your specifications. StopVapor is also available in standard sizes to fit any square, rectangular, or round mirror.

Ensuring a Perfectly Clear Surface

The StopVapor bathroom mirror demister guarantees a perfectly clear mirror surface, matching the dimensions of the heating film used on the back of the mirror.

Easy to apply, the StopVapor mirror heating pad is self-adhesive: simply place it on the back of the mirror at the desired height after removing the adhesive backing.

Leave 1 cm between the wall and the mirror to allow for the power cable to pass through.

Standard Sizes of StopVapor Heaters

  • 16×28 cm 230V 8W
  • 28×28 cm 230V 16W
  • 41×28 cm 230V 24W
  • 40×40 cm 230V 30W
  • ø40 cm 230V 25W
  • ø50 cm 230V 40W
  • 50×50 cm 55W 230V
  • 101×44 cm 105W 230V
  • 100×60 cm 145W 230V

Alper can produce dimensions according to customer designs, even for single batches.

Specifications Technical

  • Maximum dimensions: 1000x600mm (different sizes available upon request).
  • Power and supply voltages upon request.
  • Excellent temperature uniformity.
  • Functionality without the use of thermal protection such as thermal fuses, thermal switches, probes, and sensors.
  • Application of a wide range of double-sided adhesives.
  • Cables according to customer specifications.
  • Class II and III design.
  • Power supply voltages 110/230/240V and low safety voltage 12/24/48V.
  • Customer-specific design.
  • Minimum temperature: 35-40°C.
  • Designed in accordance with Directive 2014/35/EU.

Compliance Tests and Regulations

Tests in accordance with standards EN 60335-1 and EN 50106.

Compliance with regulations S.I. 2016 No. 1101 (Electrical Equipment (Safety) Regulations 2016).

Complies with BS EN 60335-1, BS EN 50106.

UL E466385, VDE approvals upon request.

RoHS and REACH compliant.

Hozzászólások (0)