Фотографије су само у информативне сврхе. Погледајте спецификацију производа

please use latin characters

Произвођач: Ambrell

Херметичко заптивање шипки од нерђајућег челика коришћењем стаклених предформи

Hermetic Sealing of Stainless Steel Rods with Glass Preforms


Objective: To heat seal both ends of a stainless steel heater assembly to 300-500 ºF (149-260 ºC) and melt glass preforms.


Frequency: 212 kHz


Equipment:
  • Ambrell EASYHEATTM 2.0 kW induction heating system, equipped with a remote workhead containing two 0.66μF capacitors for a total of 1.32μF;
  • A coil specifically designed for this application.

Material: Stainless steel rods 1/2” to 3” (12.7mm to 76.2mm) diameters, glass preforms.


Temperature: 300-500 °F (149-260 °C)


Process:

A two-turn elongated helical coil is used to heat 5 to 7 stainless steel rods simultaneously for 60 seconds. The glass preforms melt and create a hermetic seal. After the first end is heated the parts are repositioned to heat the opposite end.


Benefits:
  • Hands-free heating that requires no operator skill for manufacturing;
  • Amount of glass is precisely controlled by the glass preforms and the even flow of glass creates an aesthetically pleasing bond;
  • Even distribution of heating.
Мање
Опширније

Пошаљите упит

Да ли вас занима овај производ? Да ли су вам потребне додатне информације или појединачне цене?

Контактирајте нас

Питајте производ close
Порука је послата.
Питајте производ close
Прегледајте

Додај у листу жеља

морате бити пријављени

Hermetic Sealing of Stainless Steel Rods with Glass Preforms


Objective: To heat seal both ends of a stainless steel heater assembly to 300-500 ºF (149-260 ºC) and melt glass preforms.


Frequency: 212 kHz


Equipment:
  • Ambrell EASYHEATTM 2.0 kW induction heating system, equipped with a remote workhead containing two 0.66μF capacitors for a total of 1.32μF;
  • A coil specifically designed for this application.

Material: Stainless steel rods 1/2” to 3” (12.7mm to 76.2mm) diameters, glass preforms.


Temperature: 300-500 °F (149-260 °C)


Process:

A two-turn elongated helical coil is used to heat 5 to 7 stainless steel rods simultaneously for 60 seconds. The glass preforms melt and create a hermetic seal. After the first end is heated the parts are repositioned to heat the opposite end.


Benefits:
  • Hands-free heating that requires no operator skill for manufacturing;
  • Amount of glass is precisely controlled by the glass preforms and the even flow of glass creates an aesthetically pleasing bond;
  • Even distribution of heating.
Мање
Опширније