Морате бити пријављени да
-
moreX
-
All categories
-
-
Category
-
Полупроводници
- диоде
- Тиристори
-
Електро изоловани модули
- Електро изоловани модули | ВИСХАИ (ИР)
- Електро изоловани модули | ИНФИНЕОН (ЕУПЕЦ)
- Електро изоловани модули | Семикрон
- Електро изоловани модули | ПОВЕРЕКС
- Електро изоловани модули | ИКСИС
- Електро изоловани модули | ПОСЕИЦО
- Електро изоловани модули | АББ
- Електро изоловани модули | ТЕЦХСЕМ
- Go to the subcategory
- Мостовни исправљачи
-
Транзистори
- Транзистори | GeneSiC
- SiC MOSFET модули | Mitsubishi
- SiC MOSFET модули | STARPOWER
- АББ СиЦ МОСФЕТ модули
- IGBT модули | MITSUBISHI
- Транзисторски модули | MITSUBISHI
- MOSFET модули | MITSUBISHI
- Транзисторски модули | ABB
- ИГБТ модули | POWEREX
- ИГБТ модули | ИНФИНЕОН (ЕУПЕЦ)
- Silicijum-karbidni poluprovodnički elementi
- Go to the subcategory
- Гате Дриверс
- Блокови напајања
- Go to the subcategory
-
Električni pretvarači
-
Тренутни претварачи | ЛЕМ
- Претварач струје са затвореном повратном кругом (Ц / Л)
- Претварач струје са отвореном повратном кругом (О / Л)
- Претварач струје напајан униполарним напоном
- Претварачи у Ета технологији
- Претварачи струје високе тачности серије ЛФ кк10
- Претварачи струје ЛХ серије
- ХОИС и ХОИЛ - намењени за уградњу директно на проводничку шину
- Тренутни претварачи у СМД технологији из серија ГО-СМЕ и ГО-СМС
- АУТОМОТИВНИ претварачи струје
- Go to the subcategory
- Pretvarači napona
- Претварачи за заштиту, надзор и контролу | LEM
- Давачи са два језгра | LEM
- Прецизни претварачи струје | LEM
- Go to the subcategory
-
Тренутни претварачи | ЛЕМ
-
Пасивне компоненте (кондензатори, отпорници, осигурачи, филтери)
- Otpornici
-
Osigurači
- Minijaturni osigurači za elektronske sisteme serije ABC i AGC
- Cilindrični brzi osigurači
- Osigurači sa odloženim delovanjem GL/GG i AM karakteristika
- Ultra-brzi osigurači
- Brzi osigurači sa britanskim i američkim standardom
- Brzi osigurači sa evropskim standardom
- Vučni osigurači
- Visokonaponski osigurači
- Go to the subcategory
-
Kondenzatori
- Motorni kondenzatori
- Elektrolitski kondenzatori
- Kondenzatori - snubberi
- Energetski kondenzatori
- Kondenzatori za DC kola
- kondenzatori za kompenzaciju snage
- Visokonaponski kondenzatori
- Kondenzatori za indukciono grejanje
- Impulsni kondenzatori
- ДЦ ЛИНК кондензатори
- Кондензатори за АЦ/ДЦ кола
- Go to the subcategory
- EMI filtri
- Superkondenzatori
- Заштита од пренапона
- Go to the subcategory
-
Releji i kontaktori
- Теорија релеја и склопника
- Trofazni poluprovodnički releji
- Трофазни полупроводнички релеји наизменичне струје
- Регулатори, команде и додаци
- Sistemi za meki sart i reverziblni kontaktori
- Elektromehanički releji
- Kontaktori
- Rotacioni prekidači
-
Једнофазни полупроводнички релеји наизменичне струје
- Једнофазни релеји наизменичне струје, 1 серија | Д2425 | Д2450
- Jednofazni poluvodički izmjenični releji CWA i CWD serije
- Jednofazni poluvodički izmjenični releji CMRA i CMRD serije
- Jednofazni poluvodički izmjenični releji - serija PS
- Двоструки и четвороструки полупроводнички релеји наизменичне струје, серије Д24 Д, ТД24 К, Х12Д48 Д.
- Jednofazni poluvodički releji - gn serije
- Jednofazni kružni releji Ckr serije
- Jednofazni AC poluvodički releji za DIN sabirnice - ERDA I ERAA serija
- 150A AC jednofazni releji
- Čvrsti releji s ugrađenim hladnjakom na šini - ENDA, ERDA1 / ERAA1 series
- Go to the subcategory
- Monofazni poluprovodnički releji za štampane ploče
- Интерфејс релеји
- Go to the subcategory
- Indukcione komponenete
- Radijatori, Varistori, Termička zaštita
- Ventilatori
- Klimatizacija, Pribor za industrijska kućišta, Kuleri
-
Батерије, пуњачи, бафер напајања и претварачи
- Батерије, пуњачи - теоријски опис
- Litijum-jonske baterije. Nestandardne baterije. Sistem za upravljanje baterijom (BMS)
- Baterije
- Punjači i dodaci za baterije
- UPS i puferski izvori napajanja
- Pretvarači i dodaci- fotonaponski
- Складиште енергије
- Гориве ћелије
- Литијум-јонске батерије
- Go to the subcategory
-
Automatika
- Крајњи прекидачи, микро прекидачи
- Сензори, претварачи
- Пирометрија
- Бројачи, тајмери, панел мерачи
- Индустријски заштитни уређаји
- Светлосна и звучна сигнализација
- Термовизијска камера
- ЛЕД дисплеји
- Тастери и прекидачи
-
Снимачи
- Снимач АЛ3000
- КР2000 снимач
- Снимач КР5000
- ХН-ЦХ мерач са функцијом регистрације влажности и температуре
- Потрошни материјал за снимаче
- 71ВР1 снимач
- Снимач КР 3000
- ПЦ снимачи серије Р1М
- ПЦ снимачи серије Р2М
- ПЦ снимач, 12 изолованих улаза - РЗМС-У9
- ПЦ снимач, УСБ, 12 изолованих улаза - РЗУС
- Go to the subcategory
- Возачи и панели
- Go to the subcategory
-
Kablovi, Licnaste žice, Kablovski kanali, Fleksibilne veze
- жице
- лицнастим жице
- Каблови за специјалне намене
- схиртс
-
плетенице
- браидс флат
- плетенице коло
- Врло флексибилан плетеница - стан
- Врло флексибилан плетеница - коло
- Бакар плетена цилиндрични
- Бакра плетеница штит и цилиндрични
- Флексибилни уземљење траке
- Плетенице ЦИЛИНДРИЦАЛ поцинковани и нерђајућег челика
- ПВЦ изолацијом бакарне плетенице - Температура 85 ° Ц
- Стан плетени алуминијум
- Цоннецтион Кит - плетенице и цеви
- Go to the subcategory
- Прибор за вучу
- папучица
- Флексибилни исолатед сабирнице
- Вишеслојна флексибилан шина
- системи за управљање кабл
- Водове, цеви
- Go to the subcategory
- View all categories
-
Полупроводници
-
-
- Suppliers
-
Applications
- Automatika industrijska
- CNC alatni strojevi
- DC i izmjenični pogoni (pretvarači)
- Indukciono grejanje
- Industrijski zaštitni uređaji
- Istraživanje i laboratorijska merenja
- Mašine za sušenje i obradu drveta
- Mašine za termoformiranje
- Merenje i regulacija temperature
- Motori i transformatori
- Oprema i dijelovi za opasna područja (EX)
- Oprema za centrale, kontrolne ormare i telekomunikacije
- Poligrafija
- Rudarstvo, metalurgija i livnica
- Tramvajska i železnička vuča
- UPS i ispravljački sistemi
- Апарати за заваривање и апарати за заваривање
- Индустријска аутоматизација
- ХВАЦ аутоматизација
-
УСЛУГА, ПОПРАВКА
-
-
Инсталација уређаја
-
- Kontakt
- Zobacz wszystkie kategorie
Фотографије су само у информативне сврхе. Погледајте спецификацију производа
please use latin characters
The IM series is an on-line multi IR wavelength Mirror type analyzer utilizing the infrared absorption technology for measuring product constituent and/or thickness. Signal processing capabilities are built into the Compact All-In-One detector unit for easy installation and operation. A maximum of 99 calibration curves can be stored into the detector memory for numerous measurement applications. The detector can be used by itself or connected to a PC/plant control system, as both analog and digital outputs are provided. A remote setting display unit, connectable up to 9 detector units, can be used to setup various detector functions and also displays measured values.
Application:
• Measuring moisture of wood chip.
• Measuring the thickness of sheet or film.
• Measuring the organism, moisture and lipid of fodder.
• Measuring the organism, moisture and oil of potato chips.
• Measuring moisture of garbage (RDF moisture).
• Measuring the coating thickness on the painting sheet.
• Measuring moisture of powder.
• Measuring moisture in cleaning solution.
• Measuring moisture of clay.
• Measuring moisture of fiber.
• Measure [&] Control the coating thickness
of Laminate-sheet production line.
• Measure [&] Control the painting thickness.
Features:
• Up to 10 wavelengths, capable of measuring 4 constituents such as; moisture, film-thickness, organism, and coating-thickness in real time simultaneously.
• Connectivity to multiple interfaces, RS485 (MODBUS), Ethernet (LAN)
• High-speed [&] High-repeatability (28ms)
• Multi-calculation function
• Self-diagnostic function, easy maintenance.
• Conforms to CE standards and IP-65
Object | Range | Accu. |
---|---|---|
General moisture (%) | ||
Glass / pottery / cement | ||
Potter's clay | 0...12 | >±0.3 |
Iron / metal | ||
Coal | 0...15 | >±0.2 |
Mix raw material | 0...10 | >±0.2 |
Iron oxide | 0...10 | >±0.2 |
Foods | ||
Starch | 0...25 | >±0.2 |
Bread-crumbs | 0...20 | >±0.2 |
Soybean | 0...15 | >±0.2 |
Milk powder | 0...5 | >±0.2 |
Sugar / salt | 0...2 | >±0.05 |
Flavouring | 0...10 | >±0.2 |
Tea | 0...15 | >±0.2 |
Chemicals | ||
Catalyst | 0...10 | >±0.2 |
Medium | 0...20 | >±0.2 |
Detergent | 0...15 | >±0.2 |
Ink | 0...5 | >±0.2 |
Fertilizer | 0...5 | >±0.2 |
Rubber / fiber / etc. | ||
Vinylon fiber | 0...10 | >±0.2 |
Acrylic fiber | 0...10 | >±0.2 |
Wood chip | 0...10 | >±0.2 |
Paper | 0...10 | >±0.1 |
Material | Range | Accu. |
---|---|---|
Wet paper | 40...70 | >±0.5 |
Raw bread crumbs | 30...40 | >±0.7 |
Clay | 0...30 | >±0.3 |
Silica sand | 0...10 | >±0.8 |
Bicarbonate | 0...18 | >±0.6 |
Micro moisture | ||
ABS, PVC powder | 0...1 | >±0.8 |
Granular ferrite | 0...0.5 | >±0.8 |
Thickness [um] | ||
Polyethylene PE | 10...3000 | >+0.2 |
Polypropylene PP | >±0.2 | |
Polyester PET | >±0.2 | |
Vinyl chloride PVC | >±0.2 | |
PVA | >±0.2 | |
EVA | >±0.2 | |
Polystyrene PS | >+0.2 | |
Polycarbonate | >±0.2 | |
Nylon PA | >±0.2 | |
Polyimide PI | >±0.3 | |
TAC film | >±0.2 | |
Coating (g/m2) | ||
Coat-paper | 10...1000 | |
Tuck-paper, label | ||
Adhesive WET/DRY | ||
Resin on steel-board |
Main Screen Displays measured data, trend and alarm value. Displays 4 constituents on one screen. Save data into specified folder, enable to search or read out the data. |
||
GENERAL SPECIFICATIONS | |
INFRARED MULTI ANALYZER | |
• Measuring system: | Infrared absorption type |
• Measuring wavelength: | Up to 10 wavelengths |
• Measuring component: | Up to 4 constituents |
• Light source: | Tungsten lamp |
• Measuring distance: | 200...400 mm (IRMA 1300:160...300 mm) |
• Measuring diameter: | 50 mm3 / 300 mm (IRMA 1300: 30 mm3/200 mm |
• Analog output: | 4 to 20mADC, ±0.2% of full scale (Load resistance: less than 500Ω) |
• Communications:: | RS485 MODBUS |
• Output renewal cycle: | 28 ms |
• Display [&] setup: | Displays data [&] setup parameter Parameters are configurable by key. |
• Computing:: | 2 or 3-color ratio calculation Multiple regression calculation |
• No. of calibration curve: | Up to 99 curves |
• Calibration curve: | Linear, quadratic, cubic [&] multiple regression line |
• Calibration curve correction: | Linear [&] quadratic co |
• Smoothing (delay): | 0...99 sec |
• Calibration: | By checking plate |
• Detector No. setup: | When multiple detector operation,detector No. is key configurable. |
• Channel No. setup: | Calibration curve No. is key configurable. |
• Self-diagnostic: | Outputs contact signal and communications when abnormal conditions. |
• Correction input: | Compensate measured value by external 4 to 20mA DC (sample temperature, etc.) |
• External Di/o: | Di(contact input) --- Perform either oneof preset, data-hold or real/smoothing Do(contact output) --- Selects self-diagnostic(1b) or Hi/low alarm(1a) |
• Working temperature: | 0 to 50°C (Use dry air cooling if higher than 45°C. Outlet air temperature must be lower than 30°C.) |
• Power supply: | 24V DC supplied from IR-WEP (IR-WEP power supply: 100-240VAC) |
• Power consumption:: | ok. 30 VA |
• Connection: | terminal |
• Casing: | Aluminum casting, drip-proof structure (conforming to IEC529, IP65) |
• Weight: | Approx. 4.3kg |
• Mounting:: | Bolt suspension method with 4 pieces of M8 bolts |
• CE-standards: | EMC directives EN61326+A |
SETTING DISPLAY UNIT | |
•Input signal | RS485, Up to 9 detectors connectable |
• Analog output: | 4 to 20mADC, 2 output* (Load resistance: less than 500Ω) * When multiple detector operation, outputs for detector No. 1 [&] 2. |
• Communications: | RS232C, RS422 or RS485 |
• Output renewal cycle:: | 28ms × detector number |
Display: | 1) Measured data, LED 5-digit |
2) Detector No., CH. No., Parameter setup | |
• Detector No. setup:: | Detector No.1 to No.9 is key configurable. |
• Calibration curve No. setup | Calibration curve No. is key configurable. |
• Smoothing time: | T = 0,0...9,9 s, 10...99S |
• Calibration:: | Perform calibration by key operation or by external contact in use of checking plate |
• Hold/preset: | Hold or preset the display and output by key operation or external contact. |
• Calibration curve correction: | Online correction of calibration curve Linear or quadratic correction. |
• External setup: | Detector No., CH. No., Calibration,Hold or Preset. |
• Alarm function:: | Outputs contact signal (HCL) beyond setting-range |
• Self-diagnostic: | Outputs contact signal(1b) when abnormal condition With lamp display |
• Power supply: | 100...240VAC 50/60 Hz |
• Power consumption: | max. 15 VA |
• Working ambient: | 0...50 °C |
• Casing: | ABS |
• Protection level | IP65 |
• Mounting: | Panel-mount type |
• Weight:: | Approx. 0.6kg |
CE STANDARDS SPECIFICATIONS | |
• Analog output:: | 1x4...20mA |
• Load resistance: | <500n |
• Power supply:: | 24VDC±10% |
• Power consumption: | About 10VA |
FIBER UNIT | |
• Measuring distance and diameter: | With lens --- φ25/25mm to φ40/100mm |
Without lens --- φ20/15mm to φ50/50mm | |
• Długość światłowodów: | Standard 1.5m, Max.5m (Reflection type fiber) |
Standard 2m, Max.10m (Transmission type fiber) | |
• Fiber protection: | Stainless steel flexible armour |
• Minimum bending radius: | r= 100 mm |
• Working temperature: | 0...150°C |
• Purge air flow:: | With lens --- Air purge disabled |
Without lens --- 5 to 20L/min | |
• Accessory:: | Vertical mounting holder |
Flange holder |
Analyzer IRMA
|
Setting display unit IRGMEG2
|
Power supply unit IR-WEP |
Air purge hood IR-WEA
|
Output checking plate IR-WEB
|
Connecting cable IR-WERP
|
Reflection type fiber |
Reflection type fiber (with lens)
IR-WCRE
|
Transmission type fiber
|
Output checking plate for reflection type fiber IR-WCRB |
Liquid cell IR-WCC
|
Air-cooling box IR-WEX
|
Пошаљите упит
Да ли вас занима овај производ? Да ли су вам потребне додатне информације или појединачне цене?
Контактирајте нас
морате бити пријављени
The IM series is an on-line multi IR wavelength Mirror type analyzer utilizing the infrared absorption technology for measuring product constituent and/or thickness. Signal processing capabilities are built into the Compact All-In-One detector unit for easy installation and operation. A maximum of 99 calibration curves can be stored into the detector memory for numerous measurement applications. The detector can be used by itself or connected to a PC/plant control system, as both analog and digital outputs are provided. A remote setting display unit, connectable up to 9 detector units, can be used to setup various detector functions and also displays measured values.
Application:
• Measuring moisture of wood chip.
• Measuring the thickness of sheet or film.
• Measuring the organism, moisture and lipid of fodder.
• Measuring the organism, moisture and oil of potato chips.
• Measuring moisture of garbage (RDF moisture).
• Measuring the coating thickness on the painting sheet.
• Measuring moisture of powder.
• Measuring moisture in cleaning solution.
• Measuring moisture of clay.
• Measuring moisture of fiber.
• Measure [&] Control the coating thickness
of Laminate-sheet production line.
• Measure [&] Control the painting thickness.
Features:
• Up to 10 wavelengths, capable of measuring 4 constituents such as; moisture, film-thickness, organism, and coating-thickness in real time simultaneously.
• Connectivity to multiple interfaces, RS485 (MODBUS), Ethernet (LAN)
• High-speed [&] High-repeatability (28ms)
• Multi-calculation function
• Self-diagnostic function, easy maintenance.
• Conforms to CE standards and IP-65
Object | Range | Accu. |
---|---|---|
General moisture (%) | ||
Glass / pottery / cement | ||
Potter's clay | 0...12 | >±0.3 |
Iron / metal | ||
Coal | 0...15 | >±0.2 |
Mix raw material | 0...10 | >±0.2 |
Iron oxide | 0...10 | >±0.2 |
Foods | ||
Starch | 0...25 | >±0.2 |
Bread-crumbs | 0...20 | >±0.2 |
Soybean | 0...15 | >±0.2 |
Milk powder | 0...5 | >±0.2 |
Sugar / salt | 0...2 | >±0.05 |
Flavouring | 0...10 | >±0.2 |
Tea | 0...15 | >±0.2 |
Chemicals | ||
Catalyst | 0...10 | >±0.2 |
Medium | 0...20 | >±0.2 |
Detergent | 0...15 | >±0.2 |
Ink | 0...5 | >±0.2 |
Fertilizer | 0...5 | >±0.2 |
Rubber / fiber / etc. | ||
Vinylon fiber | 0...10 | >±0.2 |
Acrylic fiber | 0...10 | >±0.2 |
Wood chip | 0...10 | >±0.2 |
Paper | 0...10 | >±0.1 |
Material | Range | Accu. |
---|---|---|
Wet paper | 40...70 | >±0.5 |
Raw bread crumbs | 30...40 | >±0.7 |
Clay | 0...30 | >±0.3 |
Silica sand | 0...10 | >±0.8 |
Bicarbonate | 0...18 | >±0.6 |
Micro moisture | ||
ABS, PVC powder | 0...1 | >±0.8 |
Granular ferrite | 0...0.5 | >±0.8 |
Thickness [um] | ||
Polyethylene PE | 10...3000 | >+0.2 |
Polypropylene PP | >±0.2 | |
Polyester PET | >±0.2 | |
Vinyl chloride PVC | >±0.2 | |
PVA | >±0.2 | |
EVA | >±0.2 | |
Polystyrene PS | >+0.2 | |
Polycarbonate | >±0.2 | |
Nylon PA | >±0.2 | |
Polyimide PI | >±0.3 | |
TAC film | >±0.2 | |
Coating (g/m2) | ||
Coat-paper | 10...1000 | |
Tuck-paper, label | ||
Adhesive WET/DRY | ||
Resin on steel-board |
Main Screen Displays measured data, trend and alarm value. Displays 4 constituents on one screen. Save data into specified folder, enable to search or read out the data. |
||
GENERAL SPECIFICATIONS | |
INFRARED MULTI ANALYZER | |
• Measuring system: | Infrared absorption type |
• Measuring wavelength: | Up to 10 wavelengths |
• Measuring component: | Up to 4 constituents |
• Light source: | Tungsten lamp |
• Measuring distance: | 200...400 mm (IRMA 1300:160...300 mm) |
• Measuring diameter: | 50 mm3 / 300 mm (IRMA 1300: 30 mm3/200 mm |
• Analog output: | 4 to 20mADC, ±0.2% of full scale (Load resistance: less than 500Ω) |
• Communications:: | RS485 MODBUS |
• Output renewal cycle: | 28 ms |
• Display [&] setup: | Displays data [&] setup parameter Parameters are configurable by key. |
• Computing:: | 2 or 3-color ratio calculation Multiple regression calculation |
• No. of calibration curve: | Up to 99 curves |
• Calibration curve: | Linear, quadratic, cubic [&] multiple regression line |
• Calibration curve correction: | Linear [&] quadratic co |
• Smoothing (delay): | 0...99 sec |
• Calibration: | By checking plate |
• Detector No. setup: | When multiple detector operation,detector No. is key configurable. |
• Channel No. setup: | Calibration curve No. is key configurable. |
• Self-diagnostic: | Outputs contact signal and communications when abnormal conditions. |
• Correction input: | Compensate measured value by external 4 to 20mA DC (sample temperature, etc.) |
• External Di/o: | Di(contact input) --- Perform either oneof preset, data-hold or real/smoothing Do(contact output) --- Selects self-diagnostic(1b) or Hi/low alarm(1a) |
• Working temperature: | 0 to 50°C (Use dry air cooling if higher than 45°C. Outlet air temperature must be lower than 30°C.) |
• Power supply: | 24V DC supplied from IR-WEP (IR-WEP power supply: 100-240VAC) |
• Power consumption:: | ok. 30 VA |
• Connection: | terminal |
• Casing: | Aluminum casting, drip-proof structure (conforming to IEC529, IP65) |
• Weight: | Approx. 4.3kg |
• Mounting:: | Bolt suspension method with 4 pieces of M8 bolts |
• CE-standards: | EMC directives EN61326+A |
SETTING DISPLAY UNIT | |
•Input signal | RS485, Up to 9 detectors connectable |
• Analog output: | 4 to 20mADC, 2 output* (Load resistance: less than 500Ω) * When multiple detector operation, outputs for detector No. 1 [&] 2. |
• Communications: | RS232C, RS422 or RS485 |
• Output renewal cycle:: | 28ms × detector number |
Display: | 1) Measured data, LED 5-digit |
2) Detector No., CH. No., Parameter setup | |
• Detector No. setup:: | Detector No.1 to No.9 is key configurable. |
• Calibration curve No. setup | Calibration curve No. is key configurable. |
• Smoothing time: | T = 0,0...9,9 s, 10...99S |
• Calibration:: | Perform calibration by key operation or by external contact in use of checking plate |
• Hold/preset: | Hold or preset the display and output by key operation or external contact. |
• Calibration curve correction: | Online correction of calibration curve Linear or quadratic correction. |
• External setup: | Detector No., CH. No., Calibration,Hold or Preset. |
• Alarm function:: | Outputs contact signal (HCL) beyond setting-range |
• Self-diagnostic: | Outputs contact signal(1b) when abnormal condition With lamp display |
• Power supply: | 100...240VAC 50/60 Hz |
• Power consumption: | max. 15 VA |
• Working ambient: | 0...50 °C |
• Casing: | ABS |
• Protection level | IP65 |
• Mounting: | Panel-mount type |
• Weight:: | Approx. 0.6kg |
CE STANDARDS SPECIFICATIONS | |
• Analog output:: | 1x4...20mA |
• Load resistance: | <500n |
• Power supply:: | 24VDC±10% |
• Power consumption: | About 10VA |
FIBER UNIT | |
• Measuring distance and diameter: | With lens --- φ25/25mm to φ40/100mm |
Without lens --- φ20/15mm to φ50/50mm | |
• Długość światłowodów: | Standard 1.5m, Max.5m (Reflection type fiber) |
Standard 2m, Max.10m (Transmission type fiber) | |
• Fiber protection: | Stainless steel flexible armour |
• Minimum bending radius: | r= 100 mm |
• Working temperature: | 0...150°C |
• Purge air flow:: | With lens --- Air purge disabled |
Without lens --- 5 to 20L/min | |
• Accessory:: | Vertical mounting holder |
Flange holder |
Analyzer IRMA
|
Setting display unit IRGMEG2
|
Power supply unit IR-WEP |
Air purge hood IR-WEA
|
Output checking plate IR-WEB
|
Connecting cable IR-WERP
|
Reflection type fiber |
Reflection type fiber (with lens)
IR-WCRE
|
Transmission type fiber
|
Output checking plate for reflection type fiber IR-WCRB |
Liquid cell IR-WCC
|
Air-cooling box IR-WEX
|