Алкид Варнисх Модифиед Г159, Г159Т
  • Алкид Варнисх Модифиед Г159, Г159Т

Фотографије су само у информативне сврхе. Погледајте спецификацију производа

please use latin characters

Произвођач: SEG

Алкид Варнисх Модифиед Г159, Г159Т

One component material, for electrical insulation class  B 130°C

Dry on air.

Application:
- electro technical material class B,
- transformers.

Main preferences
- Impregnation lacquer made from modified alkyd resin, dry fast on air, give good protection film
- resistant for humidity and mineral oils.
- is comptabile with cables in enamel class B, F and H,
- G 159 T (tropical version)satisfy requirements 41514 NFX.

Impregnation:
- by immersion, spray or vacuum.

Polymerisation:
- Few hours in a room temperature. After one hour lacquer is not viscous.
- lacquer preferences are better when it is dried in  temperature 80/100°C,
- whenn resistance for diluent or chemicals is needed, it must be dried in temperature 130°C.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing
- containers 1, 5, 30 l or 200 barrels and spray.

Hygiene and protection:
Lacquer consists ksylen.

Lacquer Standard G 159 G 159T
Chemical origins   Modified alkyd Modified alkyd
Thermal class   (B)/130°C (B)/130°C
viscosity ISO 2431 60s +/- 20s 60s +/- 20s
density @ 20°C NFT30020 0,95 0,95
Ignition point - crucible closed NFT 30020 26°C 26°C
Dry extract NSEG 0001 40% +/- 2 40% +/- 2
Colour   Mahoń, pomarańcz. Mahoń
Drying on a plate NSEG 0002 w 23°C 45 min. w23°C45 min.
Diluent   37022 37022

Preferences

Breakdown on a copper plate [thickness 0,01 mm] Volt
natural state 1000
After 8 days in humid air: 850
After 8 days in destilated water: 800
After 8 days in oil: 1200
Мање
Опширније

Пошаљите упит

Да ли вас занима овај производ? Да ли су вам потребне додатне информације или појединачне цене?

Контактирајте нас

Питајте производ close
Порука је послата.
Питајте производ close
Прегледајте

Додај у листу жеља

морате бити пријављени

One component material, for electrical insulation class  B 130°C

Dry on air.

Application:
- electro technical material class B,
- transformers.

Main preferences
- Impregnation lacquer made from modified alkyd resin, dry fast on air, give good protection film
- resistant for humidity and mineral oils.
- is comptabile with cables in enamel class B, F and H,
- G 159 T (tropical version)satisfy requirements 41514 NFX.

Impregnation:
- by immersion, spray or vacuum.

Polymerisation:
- Few hours in a room temperature. After one hour lacquer is not viscous.
- lacquer preferences are better when it is dried in  temperature 80/100°C,
- whenn resistance for diluent or chemicals is needed, it must be dried in temperature 130°C.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing
- containers 1, 5, 30 l or 200 barrels and spray.

Hygiene and protection:
Lacquer consists ksylen.

Lacquer Standard G 159 G 159T
Chemical origins   Modified alkyd Modified alkyd
Thermal class   (B)/130°C (B)/130°C
viscosity ISO 2431 60s +/- 20s 60s +/- 20s
density @ 20°C NFT30020 0,95 0,95
Ignition point - crucible closed NFT 30020 26°C 26°C
Dry extract NSEG 0001 40% +/- 2 40% +/- 2
Colour   Mahoń, pomarańcz. Mahoń
Drying on a plate NSEG 0002 w 23°C 45 min. w23°C45 min.
Diluent   37022 37022

Preferences

Breakdown on a copper plate [thickness 0,01 mm] Volt
natural state 1000
After 8 days in humid air: 850
After 8 days in destilated water: 800
After 8 days in oil: 1200
Мање
Опширније