Двокомпонентна смола са Е519Ц + Д68 серијом, полимеризацијом на собној температури
  • Двокомпонентна смола са Е519Ц + Д68 серијом, полимеризацијом на собној температури

Фотографије су само у информативне сврхе. Погледајте спецификацију производа

please use latin characters

Произвођач: SEG

Двокомпонентна смола са Е519Ц + Д68 серијом, полимеризацијом на собној температури

Application:
- this new resin type is used as a  coat for electronic components and windings. It is easy to use.

Description:
E 519C is 2 component epoxide resin reacting in the room temperature. It has great binding properties, it is almost non shrinkable, it has plasticity after polymerisation.

Polymerisation:
For 50 g: mixture can be hold for 90min in room temperature. It is necessary to prepare it gradually, according to needs. 
For fast polymerisation it is recommended:
- preliminary heat up to 50°C before adding the hardener,
- adding hardener during proper mixing.
- leave mixture for max. 5 minutes.
- pour out resin and wait for gelation.

Protection and hygiene::
-  resin is not toxic. It is recommended not to touch it with skin or inhale.
-  for hand wash after operation with resin use soap.
- It is sensitive for humidity, therefore it cannot stay for to long in contact with air.

Storage conditions:
- 4 months away from humidity, in original closed container. in temperature 10°C - 25°C.

Packing:
- in containers 1, 5 and 30 kg and barrels 200 kg,
- part B is delivered in corresponding proportion to part A..

 
Preliminary polymer part A Hardener part B
viscosity @ 23°C NSEG 0013 13190 mPas viscosity @ 23°C NSEG 0013 190 mPas
Volume weight NSEG0003 1,52 g/ml Volume weight NSEG0003 0,96 g/ml
Colour   black-red Colour   amber
Mixture A + B
Mixture weight ratio   100/22
Mixture volume ratio   74/26
Insert content   37%
viscosity @ 23°C NSEG0013 2100 mPas
Volume weight NSEG 0003 1,31 g/ml
lifetime  150 g @ 23°C NSEG 0005 78 min
Gelation time @ 23°C - 150 g NSEG 0008 100 min
Gelation time @ 121°C- 2,5g NSEG 0012 3 min
Exothermic peak @ 50 g NSEG 0007 25 °C
Exothermic peak @ 100 g NSEG 0007 26 °C
Exothermic peak @ 200 g NSEG 0007 28 °C
Polymerisation
W20°C   48 h
W100°C   90 min
Mechanical properties
Line shrinkage ISO 3521 -%
Break off resistance ISO R 527 230 daN/cm2
Lengthening during break off ISO R 527 2%
Shore hardness A/D @ 23°C ISO 868 D80
 
Electrical properties
Dielectric withstand CEI 243 13kV/mm
Dielectric constant @ 23°C (50Hz) CEI 250 3,4
Loss coefficient @ 23°C (50Hz) CEI 250 0,004
Thermal properties
Constant operation temperature   od-30 do 155 °C
Thermal conductance   0,331 W/m.°C
Self - extinguished UL 94 no
Мање
Опширније

Пошаљите упит

Да ли вас занима овај производ? Да ли су вам потребне додатне информације или појединачне цене?

Контактирајте нас

Питајте производ close
Порука је послата.
Питајте производ close
Прегледајте

Додај у листу жеља

морате бити пријављени

Application:
- this new resin type is used as a  coat for electronic components and windings. It is easy to use.

Description:
E 519C is 2 component epoxide resin reacting in the room temperature. It has great binding properties, it is almost non shrinkable, it has plasticity after polymerisation.

Polymerisation:
For 50 g: mixture can be hold for 90min in room temperature. It is necessary to prepare it gradually, according to needs. 
For fast polymerisation it is recommended:
- preliminary heat up to 50°C before adding the hardener,
- adding hardener during proper mixing.
- leave mixture for max. 5 minutes.
- pour out resin and wait for gelation.

Protection and hygiene::
-  resin is not toxic. It is recommended not to touch it with skin or inhale.
-  for hand wash after operation with resin use soap.
- It is sensitive for humidity, therefore it cannot stay for to long in contact with air.

Storage conditions:
- 4 months away from humidity, in original closed container. in temperature 10°C - 25°C.

Packing:
- in containers 1, 5 and 30 kg and barrels 200 kg,
- part B is delivered in corresponding proportion to part A..

 
Preliminary polymer part A Hardener part B
viscosity @ 23°C NSEG 0013 13190 mPas viscosity @ 23°C NSEG 0013 190 mPas
Volume weight NSEG0003 1,52 g/ml Volume weight NSEG0003 0,96 g/ml
Colour   black-red Colour   amber
Mixture A + B
Mixture weight ratio   100/22
Mixture volume ratio   74/26
Insert content   37%
viscosity @ 23°C NSEG0013 2100 mPas
Volume weight NSEG 0003 1,31 g/ml
lifetime  150 g @ 23°C NSEG 0005 78 min
Gelation time @ 23°C - 150 g NSEG 0008 100 min
Gelation time @ 121°C- 2,5g NSEG 0012 3 min
Exothermic peak @ 50 g NSEG 0007 25 °C
Exothermic peak @ 100 g NSEG 0007 26 °C
Exothermic peak @ 200 g NSEG 0007 28 °C
Polymerisation
W20°C   48 h
W100°C   90 min
Mechanical properties
Line shrinkage ISO 3521 -%
Break off resistance ISO R 527 230 daN/cm2
Lengthening during break off ISO R 527 2%
Shore hardness A/D @ 23°C ISO 868 D80
 
Electrical properties
Dielectric withstand CEI 243 13kV/mm
Dielectric constant @ 23°C (50Hz) CEI 250 3,4
Loss coefficient @ 23°C (50Hz) CEI 250 0,004
Thermal properties
Constant operation temperature   od-30 do 155 °C
Thermal conductance   0,331 W/m.°C
Self - extinguished UL 94 no
Мање
Опширније