Buzer Exepd Typ AB1-S3
Buzer Exepd Typ AB1-S3

A fényképek csak tájékoztató jellegűek. Lásd a termék specifikációit

Kérjük, használjon latin karaktereket

Gyártó: EXEPD

Exepd Buzzer Type AB1-S3

  • AB1-S3
  • Zasilanie

The Exepd type AB1-S3 buzzer is used to provide alarm signaling – via a piercing, acoustic signal – to safely warn of possible hazards in explosion-hazardous areas.

A high IP protection rating and a corrosion-resistant stainless steel housing ensure a long service life of the device, even in aggressive environmental conditions. The buzzer can be used in a variety of applications in explosion-hazardous areas. Thanks to its approval as a device, it can be mounted directly on the front of a machine – without the need for additional certification.

It has also been tested for installation in certified control panels with Ex e, Ex t, and Ex d protection.

Note: The lock nut is not included in the scope of delivery.

Mechanical data
Category Parameter Value
Explosion-proof Protection type II 2G Ex mb IIC T4 Gb
II 2D Ex mb IIIC T80 °C Db
Certificate TÜV A 20 ATEX 0102X
Ambient temperature -40 °C ... +60 °C
Electrical data Supply voltage 24 VDC
Power consumption max. 30 mA
Fuse 63 mA
Frequency 4300 Hz
Volume 85 dB / 40 cm
Electrical connection 2 x 0.5 mm², Ø 4.8 mm
Wire colors brown = +24 VDC
blue = 0 V
Casing Stainless steel 1.4305
Padding EPDM
Protection level IP66 / IP30 head
Mounting hole 22.0 ... 22.3 mm / M22 x 1.5
Tightening torque 8 Nm
Max. wall thickness 10.0 ... 15.0 mm
Logistics data Weight 150 g (1.5 m cable)
Customs code 8531 8000 – Germany

Ajánlatkérés küldése

Érdekel ez a termék? További információra vagy egyedi árajánlatra van szüksége?

Lépjen kapcsolatba velünk
Kérdezzen a termékről close
Köszönjük az üzenetét Amint lehet, válaszolunk
Kérdezzen a termékről close
Böngésszen

Add to wishlist

Musisz być zalogowany/a

  • Zasilanie

The Exepd type AB1-S3 buzzer is used to provide alarm signaling – via a piercing, acoustic signal – to safely warn of possible hazards in explosion-hazardous areas.

A high IP protection rating and a corrosion-resistant stainless steel housing ensure a long service life of the device, even in aggressive environmental conditions. The buzzer can be used in a variety of applications in explosion-hazardous areas. Thanks to its approval as a device, it can be mounted directly on the front of a machine – without the need for additional certification.

It has also been tested for installation in certified control panels with Ex e, Ex t, and Ex d protection.

Note: The lock nut is not included in the scope of delivery.

Mechanical data
Category Parameter Value
Explosion-proof Protection type II 2G Ex mb IIC T4 Gb
II 2D Ex mb IIIC T80 °C Db
Certificate TÜV A 20 ATEX 0102X
Ambient temperature -40 °C ... +60 °C
Electrical data Supply voltage 24 VDC
Power consumption max. 30 mA
Fuse 63 mA
Frequency 4300 Hz
Volume 85 dB / 40 cm
Electrical connection 2 x 0.5 mm², Ø 4.8 mm
Wire colors brown = +24 VDC
blue = 0 V
Casing Stainless steel 1.4305
Padding EPDM
Protection level IP66 / IP30 head
Mounting hole 22.0 ... 22.3 mm / M22 x 1.5
Tightening torque 8 Nm
Max. wall thickness 10.0 ... 15.0 mm
Logistics data Weight 150 g (1.5 m cable)
Customs code 8531 8000 – Germany
Hozzászólások (0)