Įvairių medžiagų ir matmenų strypų kalimas
  • Įvairių medžiagų ir matmenų strypų kalimas

Nuotraukos yra skirtos tik informaciniams tikslams. Peržiūrėkite produkto specifikaciją

please use latin characters

Gamintojas: Ambrell

Įvairių medžiagų ir matmenų strypų kalimas

Forging rods of various materials and dimensions

Objective: To heat rods of various materials and dimensions to temperature for forging with a single coil and induction heating system.

Equipment:

  • Ambrell EKOHEAT® 35 kW, 15-45 kHz induction heating system equipped with a remote workhead containing four 6.3 μF capacitors;
  • A single position nine-turn helical induction heating coil designed and developed specifically for this application

Frequency: 38 kHz

Material: Rods with outside diameters ranging from 0.5” to 1.0” (13 to 25 mm) and lengths ranging from 2.75” to 8.5” (70 to 216 mm) made from steel, stainless steel, Inconel and titanium.

Temperature: 1832 °F (1000°C)

Testing:

  • Each of the rods were placed into the coil and heated. They achieved the targeted temperature in 30-40 seconds. The coil was designed for a 5” (127 mm) heat zone.

Benefits:

  • Speed: The client was using a less powerful competitive system, and consequently, heating the larger rods could take nearly three times as long as this solution.
  • Higher Throughput: Less heating time means an improved production rate.
  • Reliability: The client’s old induction heating system from a competitor wasn’t reliable, and a new system from Ambrell resolves that issue.

Atsiųskite užklausą

Ar Jūs domina šis produktas? Ar Jums reikia papildomos informacijos ar individualaus pasiūlymo?

Susisiekite su mumis

KLAUSKITE PRODUKTO close
Pranešimas sėkmingai išsiųstas.
KLAUSKITE PRODUKTO close
Naršyti

Pridėti į norų sąrašą

tu turi būti prisijungęs

Forging rods of various materials and dimensions

Objective: To heat rods of various materials and dimensions to temperature for forging with a single coil and induction heating system.

Equipment:

  • Ambrell EKOHEAT® 35 kW, 15-45 kHz induction heating system equipped with a remote workhead containing four 6.3 μF capacitors;
  • A single position nine-turn helical induction heating coil designed and developed specifically for this application

Frequency: 38 kHz

Material: Rods with outside diameters ranging from 0.5” to 1.0” (13 to 25 mm) and lengths ranging from 2.75” to 8.5” (70 to 216 mm) made from steel, stainless steel, Inconel and titanium.

Temperature: 1832 °F (1000°C)

Testing:

  • Each of the rods were placed into the coil and heated. They achieved the targeted temperature in 30-40 seconds. The coil was designed for a 5” (127 mm) heat zone.

Benefits:

  • Speed: The client was using a less powerful competitive system, and consequently, heating the larger rods could take nearly three times as long as this solution.
  • Higher Throughput: Less heating time means an improved production rate.
  • Reliability: The client’s old induction heating system from a competitor wasn’t reliable, and a new system from Ambrell resolves that issue.