Plastikinių dangų pašalinimas nuo plieninių vielų
  • Plastikinių dangų pašalinimas nuo plieninių vielų
  • Plastikinių dangų pašalinimas nuo plieninių vielų
  • Plastikinių dangų pašalinimas nuo plieninių vielų

Nuotraukos yra skirtos tik informaciniams tikslams. Peržiūrėkite produkto specifikaciją

please use latin characters

Gamintojas: Ambrell

Plastikinių dangų pašalinimas nuo plieninių vielų

Removing plastic coating from steel tubes


Objective: Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation.


Material:
  • Hollow steel tubes 1/8” (0.318 cm) to 5/8” (1.59 cm) ID;
  • Protective polypropylene coating.

Temperature: 150 °C (302 °F)


Frequency: 185 kHz


Equipment:
  • Ambrell 5 kW induction heating system, equipped with a remote workhead containing one 1.5 μF capacitor;
  • An induction heating coil designed and developed specifically for this application.

Process: A six turn letterbox shaped coil is used to heat the inner steel pipes. The plastic coating is softened enough to be easily removed and recycled. The time required to melt the plastic from one meter of wire is approximately 45 seconds. This varies based on the diameter of the tube.


Benefits:: Induction heating is the only feasible way to remove the plastic coating, leaving it in an unpolluted form for recycling. It is a faster processing method and also reduces in the company’s carbon footprint.

mažiau
Skaityk daugiau

Atsiųskite užklausą

Ar Jūs domina šis produktas? Ar Jums reikia papildomos informacijos ar individualaus pasiūlymo?

Susisiekite su mumis

KLAUSKITE PRODUKTO close
Pranešimas sėkmingai išsiųstas.
KLAUSKITE PRODUKTO close
Naršyti

Pridėti į norų sąrašą

tu turi būti prisijungęs

Removing plastic coating from steel tubes


Objective: Recover the polypropylene insulation from hollow steel tubes to allow recycling of both the tubes and the insulation.


Material:
  • Hollow steel tubes 1/8” (0.318 cm) to 5/8” (1.59 cm) ID;
  • Protective polypropylene coating.

Temperature: 150 °C (302 °F)


Frequency: 185 kHz


Equipment:
  • Ambrell 5 kW induction heating system, equipped with a remote workhead containing one 1.5 μF capacitor;
  • An induction heating coil designed and developed specifically for this application.

Process: A six turn letterbox shaped coil is used to heat the inner steel pipes. The plastic coating is softened enough to be easily removed and recycled. The time required to melt the plastic from one meter of wire is approximately 45 seconds. This varies based on the diameter of the tube.


Benefits:: Induction heating is the only feasible way to remove the plastic coating, leaving it in an unpolluted form for recycling. It is a faster processing method and also reduces in the company’s carbon footprint.

mažiau
Skaityk daugiau