Plastikinio vamzdelio galo lydymas
  • Plastikinio vamzdelio galo lydymas

Nuotraukos yra skirtos tik informaciniams tikslams. Peržiūrėkite produkto specifikaciją

please use latin characters

Gamintojas: Ambrell

Plastikinio vamzdelio galo lydymas

Melting the end of a plastic tube to create a seal


Objective: Melting the end pieces of a plastic tube together to create an air tight seal.


Frequency: 185 kHz


Equipment:
  • Ambrell 4.2 kW induction heating system, equipped with a remote workhead containing two 1.5μF capacitors for a total of 0.75μF;
  • An induction heating coil designed and developed specifically for this application.

Material: Plastic tube 2.5” (63.5mm) long, 0.75” (19mm) diameter.


Process:

A single turn coil encapsulated in custom blocks is used for sealing the tube. Two tubes are placed between the coil blocks and a 7lb (3.2kg) load is applied to the top of the coil. Power is only supplied to the top block of the coil for 250 milli-seconds causing the plastic to melt and create an air tight seal.


Benefits:
  • Fast and precise application of heat;
  • Hands-free heating that involves no operator skill for manufacturing;
  • Even distribution of heating.
mažiau
Skaityk daugiau

Atsiųskite užklausą

Ar Jūs domina šis produktas? Ar Jums reikia papildomos informacijos ar individualaus pasiūlymo?

Susisiekite su mumis

KLAUSKITE PRODUKTO close
Pranešimas sėkmingai išsiųstas.
KLAUSKITE PRODUKTO close
Naršyti

Pridėti į norų sąrašą

tu turi būti prisijungęs

Melting the end of a plastic tube to create a seal


Objective: Melting the end pieces of a plastic tube together to create an air tight seal.


Frequency: 185 kHz


Equipment:
  • Ambrell 4.2 kW induction heating system, equipped with a remote workhead containing two 1.5μF capacitors for a total of 0.75μF;
  • An induction heating coil designed and developed specifically for this application.

Material: Plastic tube 2.5” (63.5mm) long, 0.75” (19mm) diameter.


Process:

A single turn coil encapsulated in custom blocks is used for sealing the tube. Two tubes are placed between the coil blocks and a 7lb (3.2kg) load is applied to the top of the coil. Power is only supplied to the top block of the coil for 250 milli-seconds causing the plastic to melt and create an air tight seal.


Benefits:
  • Fast and precise application of heat;
  • Hands-free heating that involves no operator skill for manufacturing;
  • Even distribution of heating.
mažiau
Skaityk daugiau