HOP 200SB iki HOP 600SB serijos keitikliai
  • HOP 200SB iki HOP 600SB serijos keitikliai

Nuotraukos yra skirtos tik informaciniams tikslams. Peržiūrėkite produkto specifikaciją

please use latin characters

Gamintojas: LEM

HOP 200SB iki HOP 600SB serijos keitikliai

 

HOP 200-SB

HOP 300-SB

HOP 400-SB

HOP 500-S

HOP 600-SB

Primary nominal  current rms IPNsk 200A 300A 400A 500A 600A
Primary current,measuring range IPmax ±300A ±450A ±600A ±750A ±900A

Mechanical characteristics
• General tolerance
± 1 mm
• Primary through hole
41 x 12.5 mm
• Busbar fastening or panel mounting
2 holes ø4
• Connection of secondary
MOLEX 5045-04/AG

Remarks
VOUT is positive when IP flows in the direction of the arrow.
The return busbar and primary conductor elbow must be  located at least at 2.5 x window length more far away from the transducer case.
Temperature of the primary busbar cannot exceed 90°C.
Dynamic performances are best with a primary busbar completely filling the primary aperture.
This is a standard model. For different versions (supply voltages, different output, unidirectional measurements ...), please contact us.


Dimensions[mm]
PRZETWORNIKI SERII HOP 200 SB DO HOP 600 SB PRZETWORNIKI SERII HOP 200 SB DO HOP 600 SB

Atsiųskite užklausą

Ar Jūs domina šis produktas? Ar Jums reikia papildomos informacijos ar individualaus pasiūlymo?

Susisiekite su mumis

KLAUSKITE PRODUKTO close
Pranešimas sėkmingai išsiųstas.
KLAUSKITE PRODUKTO close
Naršyti

Pridėti į norų sąrašą

tu turi būti prisijungęs

 

HOP 200-SB

HOP 300-SB

HOP 400-SB

HOP 500-S

HOP 600-SB

Primary nominal  current rms IPNsk 200A 300A 400A 500A 600A
Primary current,measuring range IPmax ±300A ±450A ±600A ±750A ±900A

Mechanical characteristics
• General tolerance
± 1 mm
• Primary through hole
41 x 12.5 mm
• Busbar fastening or panel mounting
2 holes ø4
• Connection of secondary
MOLEX 5045-04/AG

Remarks
VOUT is positive when IP flows in the direction of the arrow.
The return busbar and primary conductor elbow must be  located at least at 2.5 x window length more far away from the transducer case.
Temperature of the primary busbar cannot exceed 90°C.
Dynamic performances are best with a primary busbar completely filling the primary aperture.
This is a standard model. For different versions (supply voltages, different output, unidirectional measurements ...), please contact us.


Dimensions[mm]
PRZETWORNIKI SERII HOP 200 SB DO HOP 600 SB PRZETWORNIKI SERII HOP 200 SB DO HOP 600 SB