Tester de vedere cu tija de piston
  • Tester de vedere cu tija de piston

Fotografiile au doar scop informativ. Vizualizați specificațiile produsului

please use latin characters

Producător: DACPOL SERVICE

Tester de vedere cu tija de piston

Vision tester for piston rods

Tester for vision testing of piston rods, gas springs with diameters of 6, 8, 10, 14 mm and lengths from 50 to 550 mm.


Technical data

Vision system
Tested piston rods Ø6, Ø8, Ø10, Ø14 mm
Power supply
230 VAC, 50 Hz
Power supply tolerance +10% ÷ -10%
Power connection 3 x 4 mm²
Maximum main current ≤ 20 A
Output power 2 kW
Piston rod length 50 ÷ 550 mm
Surface layer hardness
HV0,1 ≥ 550
Color
gray-black
Roughness max. Ra0,1 (after polishing)
Maximum number of simultaneously tested piston rods 10 pcs.
Number of measuring fields
10 pcs.
Cycle of work
every 6 seconds - piston rod 250 mm
Pressure connection 6 atm, pipe Ø8mm
Operating mode
24 h/day
Environmental conditions operating temperature: 10 °C ÷ 35 °C
humidity: 10% ÷ 75%
Dimensions of the control cabinet (H x W x D)
1727 x 600 x 1532 [mm]
Overall dimensions with polisher and feeders (H x W x D)
1800 x 4508 x 4210 [mm]
Feeders
Number of feeders
2 pcs.
Power supply
from the vision system control cabinet
Connection of pneumatics
from vision system
Number of piston rods in the feeder
approx. 400 pcs. Ø8
Maximum piston rod length
550 mm
Polisher
Polisher symbol
LMCL-01
Power supply
3x400 VAC
Type of polisher
centreless for steel round shafts
Tape
polishing with abrasive belts (dry, recommended belt length - 3000 mm)
Body
provides vibration elimination and dimensional accuracy
Roller feed
by means of clamping of an angled rubber roller
Loading workpieces for polishing from the automatic feeder
Adjustments for changing process parameters feed rollers, centering, camber, clamping
Speed
approx. 2-5 m/min


Trimite o cerere

Sunteți interesat de acest produs? Aveți nevoie de informații suplimentare sau de prețuri individuale?

Contactează-ne

CERETI PRODUSUL close
Mesaj trimis cu succes.
CERETI PRODUSUL close
Naviga

Adaugă la lista de dorințe

trebuie să fii logat

Vision tester for piston rods

Tester for vision testing of piston rods, gas springs with diameters of 6, 8, 10, 14 mm and lengths from 50 to 550 mm.


Technical data

Vision system
Tested piston rods Ø6, Ø8, Ø10, Ø14 mm
Power supply
230 VAC, 50 Hz
Power supply tolerance +10% ÷ -10%
Power connection 3 x 4 mm²
Maximum main current ≤ 20 A
Output power 2 kW
Piston rod length 50 ÷ 550 mm
Surface layer hardness
HV0,1 ≥ 550
Color
gray-black
Roughness max. Ra0,1 (after polishing)
Maximum number of simultaneously tested piston rods 10 pcs.
Number of measuring fields
10 pcs.
Cycle of work
every 6 seconds - piston rod 250 mm
Pressure connection 6 atm, pipe Ø8mm
Operating mode
24 h/day
Environmental conditions operating temperature: 10 °C ÷ 35 °C
humidity: 10% ÷ 75%
Dimensions of the control cabinet (H x W x D)
1727 x 600 x 1532 [mm]
Overall dimensions with polisher and feeders (H x W x D)
1800 x 4508 x 4210 [mm]
Feeders
Number of feeders
2 pcs.
Power supply
from the vision system control cabinet
Connection of pneumatics
from vision system
Number of piston rods in the feeder
approx. 400 pcs. Ø8
Maximum piston rod length
550 mm
Polisher
Polisher symbol
LMCL-01
Power supply
3x400 VAC
Type of polisher
centreless for steel round shafts
Tape
polishing with abrasive belts (dry, recommended belt length - 3000 mm)
Body
provides vibration elimination and dimensional accuracy
Roller feed
by means of clamping of an angled rubber roller
Loading workpieces for polishing from the automatic feeder
Adjustments for changing process parameters feed rollers, centering, camber, clamping
Speed
approx. 2-5 m/min