Nesočiųjų poliesterių lakas P721, polimerizacija džiovykloje
  • Nesočiųjų poliesterių lakas P721, polimerizacija džiovykloje

Nuotraukos yra skirtos tik informaciniams tikslams. Peržiūrėkite produkto specifikaciją

please use latin characters

Gamintojas: SEG

Nesočiųjų poliesterių lakas P721, polimerizacija džiovykloje

One component - for insulation class H 180°C.

Application:
-static and whirling electro technical material

Main characteristic:
  Lacquer
P721:
- it is a non saturated polyester resin with reactive one component monomer.
- it is in liquid condensation, as one component.
- it is easy to use
- it has good thermal resistance

Material impregnation:
By immersion, vacuum.

Polymerisation:
It is not necessary to remove diluent. Polymerization lasts 4 hour at 150C temperature.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing:
Containers
1-5, 30 and 200 l

Hygiene and protection:
It doesn't contain styrene.

Lacquer Standard P721
Chemical origins   Non saturated polyester
thermal class IEC216 [H] 180°C
viscosity 23°C CPE 6: ISO 2431 60 s
density @ 23°C NSEG 00 500 mPas
density @ 20°C NFT 30020 1.102
  [ISO 2811] >61°C
Colour:   natural[transparent yellow]
Gelation time 121°C± 1°C NSEG 0012 8 min. ± 1 min 30 s
Polymerisation   4 h. @ 150°C
sintering[ after polymerisation 4H/150°C] CEI 1033screw twist [helical coil]CEI 455 20°C>10daNprzy 180°C>2daN
Break down voltage [after polymerisation 4H/150°C]   500V
     
     

Atsiųskite užklausą

Ar Jūs domina šis produktas? Ar Jums reikia papildomos informacijos ar individualaus pasiūlymo?

Susisiekite su mumis

KLAUSKITE PRODUKTO close
Pranešimas sėkmingai išsiųstas.
KLAUSKITE PRODUKTO close
Naršyti

Pridėti į norų sąrašą

tu turi būti prisijungęs

One component - for insulation class H 180°C.

Application:
-static and whirling electro technical material

Main characteristic:
  Lacquer
P721:
- it is a non saturated polyester resin with reactive one component monomer.
- it is in liquid condensation, as one component.
- it is easy to use
- it has good thermal resistance

Material impregnation:
By immersion, vacuum.

Polymerisation:
It is not necessary to remove diluent. Polymerization lasts 4 hour at 150C temperature.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing:
Containers
1-5, 30 and 200 l

Hygiene and protection:
It doesn't contain styrene.

Lacquer Standard P721
Chemical origins   Non saturated polyester
thermal class IEC216 [H] 180°C
viscosity 23°C CPE 6: ISO 2431 60 s
density @ 23°C NSEG 00 500 mPas
density @ 20°C NFT 30020 1.102
  [ISO 2811] >61°C
Colour:   natural[transparent yellow]
Gelation time 121°C± 1°C NSEG 0012 8 min. ± 1 min 30 s
Polymerisation   4 h. @ 150°C
sintering[ after polymerisation 4H/150°C] CEI 1033screw twist [helical coil]CEI 455 20°C>10daNprzy 180°C>2daN
Break down voltage [after polymerisation 4H/150°C]   500V