Ви повинні увійти в систему
Category
Фотографії призначені тільки для інформаційних цілей. Подивитися специфікацію продукту
please use latin characters
| Four designs | duct version | (LK) |
| wall mounting | (LW) | |
| rod-shaped Ø 12mm | (LP) | |
| room version | (LI) | |
| Different | humidity and temp., 2 x active | |
| humidity active / temp. passive | ||
| humidity only, active | ||
| temperature only, active or passive | ||
| Output signals | 0…1 V | |
| 0…10 V | ||
| passive (temperature) | ||
| Special versions | sealing for increased requirements, e.g. condensation | |
| sealing against vibrations | ||
| Filter | protective basket ZE07 (IP00) | |
| filter with membrane ZE08 (IP30) | ||
| PTFE sintered filter ZE05 (IP65) | ||
| Rod-shaped sensor with 2 types of connection | 6-pin plug-in connection and assembled cable | |
| permanently attached cable |
| Humidity | ||
| • sensing element | calibrate sensor chip calHT | |
| • output range | 0…100%rh | |
| • accuracy | ||
| • 30…80%rh for 10…40°C | ±3 %rh | |
| • remaining range | ±5 %rh | |
| • influence of temperature. <10°C lub >40°C | ±0,06%rh/K | |
| Temperature / active output | ||
| • sensing element | calibrated sensor chip calHT | |
| • output ranges | 0…+50°C | |
| -20…+80°C | ||
| -30…+70°C | ||
| 0…+100°C | ||
| • Accuracy | ||
| • dla 10…40°C | ±0,8K | |
| • remaining range | chart | |
| • The influence of temperature. <10°C lub >40°C | ±0,06%rh/K | |
| Temperature / passive output | ||
| • sensign elements | Pt100 | |
| Pt1000 | ||
| •[nbsp other sensing elements on demand | e.g.. NTC | |
| Electrical data | ||
| • outputs] | 2 x 0…1V | |
| 2 x 0…10V | ||
| Wyjścia pasywne | ||
| na specjalne zamówienie | ||
| • Supply voltage | ||
| • LK, LW, LI | (6)13…30V DC lub | |
| • output: 0…(1)10V | 24V AC±10% | |
| • LP | ||
| • outpug: 0…(1)10V | (6)12…30V DC | |
| • load resistance for | 0…1V >1 kΩ | |
| output 0 .. .1V | > 1kΩ | |
| output 0 ... 1V | > 10 kΩ | |
| • Kompatybilność elektromagnetyczna | Zgodnie z EN 61326 | |
| Generral data | ||
| • Medium | air, pressureless, non-aggressive, non-condensing | |
| • Min. air speed | 0,5m/s | |
| • Temperatura pracy | ||
| • type LP, LK, LW | -30…+80°C | |
| • type l LI | -20…+60°C | |
| • storage temperature | -40…+85°C | |
| • degree of protection of measuring head (series LK,LW,LI) | ||
| • with protective basket ZE07 | IP00 | |
| • with membrane filter ZE08 | IP30 | |
| • with PTFE sintered filter ZE05 | IP65 | |
| • degree of protection of housing | ||
| • type LP, LK, LW | IP65 | |
| • typel LI | IP30 | |
| • material of housing | ||
| • type LP, LK, LW | PC (light grey/ white) | |
| • typel LI | ABS (white) | |


Ви зацікавлені у цьому продукті? Вам потрібна додаткова інформація або індивідуальні розцінки?
Ви повинні увійти в систему
| Four designs | duct version | (LK) |
| wall mounting | (LW) | |
| rod-shaped Ø 12mm | (LP) | |
| room version | (LI) | |
| Different | humidity and temp., 2 x active | |
| humidity active / temp. passive | ||
| humidity only, active | ||
| temperature only, active or passive | ||
| Output signals | 0…1 V | |
| 0…10 V | ||
| passive (temperature) | ||
| Special versions | sealing for increased requirements, e.g. condensation | |
| sealing against vibrations | ||
| Filter | protective basket ZE07 (IP00) | |
| filter with membrane ZE08 (IP30) | ||
| PTFE sintered filter ZE05 (IP65) | ||
| Rod-shaped sensor with 2 types of connection | 6-pin plug-in connection and assembled cable | |
| permanently attached cable |
| Humidity | ||
| • sensing element | calibrate sensor chip calHT | |
| • output range | 0…100%rh | |
| • accuracy | ||
| • 30…80%rh for 10…40°C | ±3 %rh | |
| • remaining range | ±5 %rh | |
| • influence of temperature. <10°C lub >40°C | ±0,06%rh/K | |
| Temperature / active output | ||
| • sensing element | calibrated sensor chip calHT | |
| • output ranges | 0…+50°C | |
| -20…+80°C | ||
| -30…+70°C | ||
| 0…+100°C | ||
| • Accuracy | ||
| • dla 10…40°C | ±0,8K | |
| • remaining range | chart | |
| • The influence of temperature. <10°C lub >40°C | ±0,06%rh/K | |
| Temperature / passive output | ||
| • sensign elements | Pt100 | |
| Pt1000 | ||
| •[nbsp other sensing elements on demand | e.g.. NTC | |
| Electrical data | ||
| • outputs] | 2 x 0…1V | |
| 2 x 0…10V | ||
| Wyjścia pasywne | ||
| na specjalne zamówienie | ||
| • Supply voltage | ||
| • LK, LW, LI | (6)13…30V DC lub | |
| • output: 0…(1)10V | 24V AC±10% | |
| • LP | ||
| • outpug: 0…(1)10V | (6)12…30V DC | |
| • load resistance for | 0…1V >1 kΩ | |
| output 0 .. .1V | > 1kΩ | |
| output 0 ... 1V | > 10 kΩ | |
| • Kompatybilność elektromagnetyczna | Zgodnie z EN 61326 | |
| Generral data | ||
| • Medium | air, pressureless, non-aggressive, non-condensing | |
| • Min. air speed | 0,5m/s | |
| • Temperatura pracy | ||
| • type LP, LK, LW | -30…+80°C | |
| • type l LI | -20…+60°C | |
| • storage temperature | -40…+85°C | |
| • degree of protection of measuring head (series LK,LW,LI) | ||
| • with protective basket ZE07 | IP00 | |
| • with membrane filter ZE08 | IP30 | |
| • with PTFE sintered filter ZE05 | IP65 | |
| • degree of protection of housing | ||
| • type LP, LK, LW | IP65 | |
| • typel LI | IP30 | |
| • material of housing | ||
| • type LP, LK, LW | PC (light grey/ white) | |
| • typel LI | ABS (white) | |


Вашу оцінку відгуку не було надіслано
Поскаржитись на відгук
Скаргу надіслано
Ваш відгук не надіслано
Написати свій відгук
Відгук надіслано
Ваш відгук не надіслано