shopping_cart
Мапа
0,00 PLN
0
Буфер обміну
Ви повинні увійти в систему
Menu
-
WróćX
-
компоненти
-
-
Category
-
Напівпровідники
- Діоди
- Тиристори
-
Електро-ізольовані модулі
- Електроізольовані модулі | ВІШАЙ (ІЧ)
- Електроізольовані модулі | INFINEON (EUPEC)
- Електроізольовані модулі | Семікрон
- Електроізольовані модулі | POWEREX
- Електроізольовані модулі | IXYS
- Електроізольовані модулі | ПОСЕЙКО
- Електроізольовані модулі | ABB
- Електроізольовані модулі | ТЕХСЕМ
- Przejdź do podkategorii
- Випрямні мости
-
Транзистори
- Транзистори | GeneSiC
- Модулі SiC MOSFET | Mitsubishi
- Модулі SiC MOSFET | STARPOWER
- Модулі ABB SiC MOSFET
- Модулі IGBT | MITSUBISHI
- Транзисторні модулі | MITSUBISHI
- Модулі MOSFET | MITSUBISHI
- Транзисторні модулі | ABB
- Модулі IGBT | POWEREX
- Модулі IGBT | INFINEON (EUPEC)
- Напівпровідникові елементи з карбіду кремнію (SiC)
- Przejdź do podkategorii
- Драйвери
- Блоки потужності
- Przejdź do podkategorii
-
Електричні перетворювачі
-
Перетворювачі струму / датчики струму ф. LEM
- Перетворювачі струму із зворотним зв'язком (C/L) ф. LEM
- Перетворювачі струму із зворотним зв'язком (O/L) ф. LEM
- Перетворювачі струму з уніполярним живленням ф.LEM
- Перетворювачі по технології Eta ф. LEM
- Високоточні перетворювачі струму серії LF xx10
- Перетворювачі струму серії LH
- HOYS і HOYL - призначені для кріплення безпосередньо на провідниковій рейці
- Перетворювачі струму в технології SMD серій GO-SME та GO-SMS
- АВТОМОБІЛЬНІ перетворювачі струму
- Przejdź do podkategorii
-
Перетворювачі напруги | ЛЕМ
- Перетворювачі напруги серії LV
- Перетворювачі напруги серії DVL
- Прецизійні перетворювачі струму з подвійним магнітним осердям серії CV
- Тяговий перетворювач напруги DV 4200/SP4
- Перетворювачі напруги серії DVM
- Перетворювач напруги - DVC 1000-P
- Перетворювачі напруги - серія DVC 1000
- Przejdź do podkategorii
- Перетворювачі для захисту, контролю та контролю | LEM
- Двоядерні перетворювачі | LEM
- Точні перетворювачі струму | LEM
- Przejdź do podkategorii
-
Перетворювачі струму / датчики струму ф. LEM
-
Пасивні компоненти (конденсатори, резистори, запобіжники, фільтри)
- Резистори
-
Запобіжники
- Мініатюрні запобіжники для електронних плат серії ABC і AGC
- Швидкі трубчасті запобіжники
- Повільні запобіжники з характеристиками GL / GG і AM
- Ультрашвидкі плавкі запобіжники
- Швидкі запобіжники: британський та американський стандарт
- Швидкі запобіжники. Європейський стандарт
- Тягові запобіжники
- Високовольтні запобіжні
- Przejdź do podkategorii
-
Конденсатори
- Конденсатори для електродвигунів
- Електролітичні конденсатори
- Снабберні конденсатори
- Конденсатори потужності
- Конденсатори для DC ланцюгів
- Конденсатори для компенсації пасивної потужності
- Високовольтні конденсатори
- Конденсатори великої потужності для індукційного нагріву
- Конденсатори для зберігання імпульсів та енергії
- Конденсатори DC LINK
- Конденсатори для ланцюгів змінного / постійного струму
- Przejdź do podkategorii
- EMI фільтри
- Іоністори (супер-конденсатори)
-
Захист від стрибків напруги
- Захист від перенапруги для коаксіального застосування
- Захист від перенапруг для систем відеоспостереження
- Захист від перенапруги для силових кабелів
- Розрядники перенапруги для світлодіодів
- Розрядники перенапруги для фотоелектрики
- Захист системи зважування
- Захист від перенапруги для Fieldbus
- Przejdź do podkategorii
- Przejdź do podkategorii
-
Реле та контактори
- Реле та контактори - теорія
- Напівпровідникові реле AC 3-фазні
- Напівпровідникові реле DC
- Контролери, системи управління та аксесуари
- Системи плавного пуску і реверсивні контактори
- Електромеханічні реле
- Контактори
- Оборотні перемикачі
-
Напівпровідникові реле AC 1-фазні
- РЕЛЕ AC 1-ФАЗНЫЕ СЕРИИ 1 D2425 | D2450
- Однофазное реле AC серии CWA и CWD
- Однофазное реле AC серии CMRA и CMRD
- Однофазное реле AC серии PS
- Реле AC двойное и четверное серии D24 D, TD24 Q, H12D48 D
- Однофазні твердотільні реле серії gn
- Однофазні напівпровідникові реле змінного струму, серія ckr
- Однофазні реле змінного струму ERDA та ERAA для DIN-рейки
- Однофазні реле змінного струму для струму 150А
- Подвійні твердотільні реле, інтегровані з радіатором для DIN-рейки
- Przejdź do podkategorii
- Напівпровідникові реле AC 1-фазні для друкованих плат
- Інтерфейсні реле
- Przejdź do podkategorii
- Індукційні компоненти
- Радіатори, варистори, термічний захист
- Вентилятори
- Кондиціонери, обладнання для шаф електричних, охолоджувачі
-
Батареї, зарядні пристрої, буферні блоки живлення та інвертори
- Батареї, зарядні пристрої - теоретичний опис
- Літій-іонні батареї. Спеціальні батареї. Система управління акумулятором (BMS)
- Батареї
- Зарядні пристрої та аксесуари
- Резервне джерело живлення ДБЖ та буферні джерела живлення
- Перетворювачі та аксесуари для фотоелектрики
- Зберігання енергії
- Паливні елементи
- Літій-іонні акумулятори
- Przejdź do podkategorii
-
Автоматика
- Кінцеві вимикачі, Мікровимикачі
- Датчики Перетворювачі
- Пірометри
- Лічильники, Реле часу, Панельні вимірювальні прилади
- Промислові захисні пристрої
- Світлові і звукові сигнальні установки
- Термокамери, Тепловізори
- LED-екрани
- Керуюча апаратура
-
Реєстратори
- Реєстратори температури з записом на стрічку і з цифровим індикатором - AL3000
- Мікропроцесорні реєстратори з екраном LCD серія KR2000
- Реєстратор KR5000
- Вимірювач з функцією реєстрації вологості і температури HN-CH
- Експлуатаційні матеріали для реєстраторів
- Компактний графічний реєстратор 71VR1
- Реєстратор KR 3000
- Реєстратор PC серії R1M
- Реєстратор PC серії R2M
- Реєстратор PC, USB, 12 ізольованих входів – RZMS
- Реєстратор PC, USB, 12 ізольованих входів – RZUS
- Przejdź do podkategorii
- Контролери
- Przejdź do podkategorii
-
Провід, літцендрат, гофровані рукави, гнучкі з'єднання
- Дроти
- Багатожильні дроти Lica
-
Кабелі і дроти для спеціальних застосувань
- Подовжувальні та компенсаційні дроти
- Дроти для термопар
- Приєднувальні дроти для датчиків PT
- Багатожильні дроти темп. -60C до +1400C
- Дроти середньої напруги
- Дроти запалювання
- Нагрівальні дроти
- Одножильні дроти темп. -60C до +450C
- Залізничні дроти
- Нагрівальні дроти для вибухонебезпечних зон
- Przejdź do podkategorii
- Оболонки
-
Плетені кабелі
- Плоскі плетені кабелі
- Круглі плетені кабелі
- Дуже гнучкі плетені кабелі - плоскі
- Дуже гнучкі плетені кабелі - круглі
- Мідні циліндричні плетені кабелі
- Мідні циліндричні плетені кабелі і кожуха
- Гнучкі заземлювальні стрічки
- Циліндричні плетені дроти з лудженої і нержавіючої сталі
- Мідні ізольовані плетені дроти PCV - температура до 85 градусів C
- Плоскі алюмінієві плетені дроти
- З'єднувальний набір - плетені дроти і трубки
- Przejdź do podkategorii
- Аксесуари для тяги
- Кабельні наконечники
- Ізольовані еластичні шини
- Багатошарові гнучкі шини
- Системи прокладки кабелю (PESZLE)
- Шланги
- Przejdź do podkategorii
- Zobacz wszystkie kategorie
-
Напівпровідники
-
-
- Постачальники
-
додатки
- ІНДУКЦІЙНИЙ НАГРІВ
- Автоматизація HVAC
- Верстати з ЧПУ
- ВИМІРЮВАННЯ ТА РЕГУЛЮВАННЯ ТЕМПЕРАТУРИ
- Вимірювання та регулювання температури
- ГІРНИЧОДОБУВНА ПРОМИСЛОВІСТЬ, СТАЛЕЛИВАРНІ КОМБІНАТИ, ГЗК
- ДВИГУНИ І ТРАНСФОРМАТОРИ
- ЕНЕРГЕТИКА
- ЗВАРЮВАЛЬНІ АПАРАТИ
- КОМПЛЕКТУЮЧІ ДЛЯ РОЗПОДІЛЬНИХ, ТЕЛЕКОМУНІКАЦІЙНИХ ШАФ І ШАФ УПРАВЛІННЯ
- МАШИНИ ДЛЯ ДЕРЕВООБРОБКИ ТА СУШІННЯ ДЕРЕВИНИ
- ПОЛІГРАФІЯ
- ПРИВІД ПОСТІЙНОГО І ЗМІННОГО СТРУМУ
- ПРИЛАДИ ТА ОБЛАДНАННЯ ДЛЯ ВИБУХОНЕБЕЗПЕЧНИХ ЗОН (EX)
- ПРИСТРОЇ БЕЗПЕРЕБІЙНОГО ЖИВЛЕННЯ (UPS) І ВИПРЯМЛЯЧІ
- ПРОМИСЛОВІ ЗАСОБИ ЗАХИСТУ
- ПРОМИСЛОВА АВТОМАТИКА
- ТЕРМОФОРМОВОЧНІ МАШИНИ
- ТЯГОВИЙ ПРИВІД
-
монтаж
-
-
Montaż urządzeń
- Встановлення шаф
- Проектування та складання шаф
- Монтаж систем електропостачання
- Пристрої енерголектронічні
-
Машини, створені на замовлення
- Автомобільна промисловість
- Фармацевтична промисловість
- Целюлозно-паперова промисловість
- Харчова промисловість і виробництво напоїв
- Гірничо-добувна промисловість
- Хімічна та нафтохімічна промисловість
- Ливарне виробництво
- Промисловість деревини та виробів з неї
- Промислова очистка води
- Przejdź do podkategorii
- НДДКР
-
Промислові тестери
- Силові напівпровідникові тестери
- Тестери електричних апаратів
- Тестери варисторів та розрядників перенапруг
- Автомобільний тестер запобіжників
- Тестер Qrr для вимірювання перехідного заряду в тиристорах та силових діодах
- Випробувач ротора автоматичних вимикачів серії FD
- Тестер перевірки пристроїв залишкового струму
- Тестер калібрування реле
- Випробувач візуальних випробувань поршневих штоків газових пружин
- Силовий тиристорний вимикач
- Тестер розбиття сітки
- Przejdź do podkategorii
- Zobacz wszystkie kategorie
-
-
-
Індуктори
-
-
Modernizacja induktorów
- Ремонт використаних дроселів
- Модернізація дроселів
-
Виробництво нових індукторів
- Загартовування колінчастих валів
- Загартовування зубів стрічкової пилки
- Нагрівання елементів перед прилипанням
- Загартовування колійних доріжок підшипників маточини коліс
- Загартовування компонентів трансмісії приводу
- Загартовування ступінчастих валів
- Нагрівання в стисних швах
- Скануюче затвердіння
- М'яка пайка
- Нагрівачі заготовок
- Przejdź do podkategorii
- База знань
- Zobacz wszystkie kategorie
-
-
-
Індукційні прилади
-
-
Urządzenia indukcyjne
-
Індукційні генератори опалення
-
Індукційні генератори опалення Ambrell
- Генератори: Потужність 500 Вт, частота 150-400 кГц
- Генератори: Потужність 1,2 - 2,4 кВт, частота 150 - 400 кГц
- Генератори: Потужність 4,2 - 10 кВт, частота 150 - 400 кГц
- Генератори: Потужність 10 - 15 кВт, частота 50 - 150 кГц
- Генератори: Потужність 30-45 кВт, частота 50-150 кГц
- Генератори: Потужність 65-135 кВт, частота 50-150 кГц
- Генератори: Потужність 180-270 кВт, частота 50-150 кГц
- Генератори: Потужність 20-35-50 кВт, частота 15-45 кГц
- Генератори: Потужність 75-150 кВт, частота 15-45 кГц
- Генератори: Потужність 200-500 кВт, частота 15-45 кГц
- Генератори: Потужність 20-50 кВт, частота 5-15 кГц
- Przejdź do podkategorii
- Індукційні генератори опалення Denki Kogyo
-
Індукційні генератори нагріву JKZ
- Генератори серії CX, частота: 50-120 кГц, потужність: 5-25 кВт
- Генератори SWS, частота: 15-30 кГц, потужність: 25-260 кВт
- Генератори (печі) для формування та ковки серії MFS, частота: 0,5-10 кГц, потужність: 80-500 кВт
- Плавильні печі MFS, частота: 0,5-10кГц, потужність: 70-200кВт
- Генератори UHT-серії, частота: 200-400 кГц, потужність: 10-160 кВт
- Przejdź do podkategorii
- Генератори ламп для індукційного нагріву
- Індукційні генератори опалення Himmelwerk
- Przejdź do podkategorii
-
Індукційні генератори опалення Ambrell
- Ремонт та модернізація
- Периферія
-
Програми
- Медичні програми
- Застосування для автомобільної промисловості
- М'яка пайка
- Паяння
- Паяння алюмінію
- Пайка магнітних інструментів з нержавіючої сталі
- Точна пайка
- Паяння в захисній атмосфері
- Пайка латунних та сталевих пробок радіатора
- Паяння спечених карбідів
- Пайка мідного наконечника і дроту
- Przejdź do podkategorii
- База знань
- Zobacz wszystkie kategorie
-
Індукційні генератори опалення
-
-
-
Сервіс
-
- Контакт
- Zobacz wszystkie kategorie
Фотографії призначені тільки для інформаційних цілей. Подивитися специфікацію продукту
please use latin characters
When it comes to controllers for compact machines, Omron's new CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. But this new and exciting range is not only compact, it is scaleable, has a faster processing speed than other controllers and is in a class of its own when it comes to price/performance. Naturally, it is compatible with all other devices in the Omron PLC line up.
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
CPU Units
Typ | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) | |
---|---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ | |
Control method | Stored program method | ||||
I/O control method | Cyclic scan with immediate refreshing | ||||
Program language | Ladder diagram | ||||
Function blocks | Maximum number of function block definitions: 128 Maximum number of instances: 256 Languages usable in function block definitions: Ladder diagrams, structured text (ST) |
||||
Instruction length | 1 to 7 steps per instruction | ||||
Instructions | Approx. 500 (function codes: 3 digits) | ||||
Instruction execution time | Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min. | ||||
Common processing time | |||||
Program capacity | 10K steps | 5K steps | |||
Number of tasks | 288 (32 cyclic tasks and 256 interrupt tasks) | ||||
Scheduled interrupt tasks |
1 (interrupt task No. 2, fixed) | ||||
Input interrupt tasks |
6 (interrupt task No. 140 to 145, fixed) | 4 (interrupt task No. 140 to 143, fixed) |
|||
(Mogq bye także określane i wykonywane zadania przerwaniowe szybkiego licznika.) | |||||
Maximum subroutine number | 256 | ||||
Maximum jump number | 256 | ||||
I/O areas |
Input bits | 24: CIO 0.00 to CIO 0.11 and CIO 1.00 to CIO 1.11 |
18: CIO 0.00 to CIO 0.11 and |
12: CIO 0.00 to CIO 0.11 | 8: CIO 0.00 to CIO 0.07 |
Output bits | 16: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.07 |
12: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.033 |
8: CIO 100.00 to CIO 100.07 | 6: CIO 100.00 to CIO 100.05 | |
1:1 Link Area | 1,024 bits (64 words): CIO 3000.00 to CIO 3063.15 (CIO 3000 to CIO 3063) | ||||
Serial PLC Link Area |
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189) | ||||
Work bits | 8,192 bits (512 words): W000.00 to W511.15 (W0 to W511) CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143) |
||||
TR Area | 16 bits: TR0 to TR15 | ||||
Holding Area | 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511) | ||||
AR Area | Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959) |
||||
Timers | 4,096 bits: T0 to T4095 | ||||
Counters | 4,096 bits: C0 to C4095 | ||||
DM Area | 32 Kwords: D0 to D32767 | 10 Kwords: D0 to D9999, D32000 to D32767 | |||
Data Register Area | 16 registers (16 bits): DR0 to DR15 | ||||
Index Register Area | 16 registers (32 bits): IR0 to IR15 | ||||
Task Flag Area | 32 flags (32 bits): TK0000 to TK0031 |
Type | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) |
---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ |
Trace Memory | 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.) | |||
Memory Cassette | A special Memory Cassette (CP1W-ME05M) can be mounted. Note: Can be used for program backups and auto-booting. | |||
Clock function | Supported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 55C), -2.0 min to +2.0 min (ambient temperature: 25°C), -2.5 min to +1.5 min (ambient temperature: 0°C) |
|||
Communications functions | One built-in peripheral port (USB 1.1): For connecting Support Software only | |||
A maximum of two Serial Communications Option Boards can be mounted. |
A maximum of one Serial Communications Option Board can be mounted | |||
Memory backup | Flash memory: User programs, parameters (such as the PLC Setup), comment data, and the entire DM Area can be saved to flash memory as initial values. Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a battery. |
|||
Battery service life | 5 years at 25C. (Use the replacement battery within two years of manufacture.) | |||
Built-in input terminals | 40 (24 inputs, 16 outputs) | 30 (18 inputs, 12 outputs) | 20 (12 inputs, 8 outputs) | 14 (8 inputs, 6 outputs) |
Number of connectable Expansion Units and Expansion I/O Units |
CP-series Expansion Unit and Expansion I/O Units: 3 max. | CP-series Expansion Units and Expansion I/O Units: 1 max. | ||
Max. number of I/O points | 160 (40 built in + 40 per Expansion (I/O) Unit 3 Units) |
150 (30 built in + 40 per Expansion (I/O) Unit 3 Units) |
60 (20 built in + 40 per Expansion (I/O) Unit 1 Unit) |
54 (14 built in + 40 per Expansion (I/O) Unit 1 Unit) |
Interrupt inputs | 6 inputs (Response time: 0.3 ms) | 4 inputs (Response time: 0.3 ms) |
||
Interrupt inputs counter mode | 6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
4 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
||
Quick-response inputs | 6 points (Min. input pulse width: 50 μs max.) | 4 points (Min. input pulse width: 50 μs max.) |
||
Scheduled interrupts | 1 | |||
High-speed counters | 4 counters, 2 axes (24-VDC input) 4 inputs: Differential phases (4x), 50 kHz or Single-phase (pulse plus direction, up/down, increment), 100 kHz Value range: 32 bits, Linear mode or ring mode Interrupts: Target value comparison or range comparison |
|||
Pulse outputs (models with transistor outputs only) |
Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed) 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction) |
|||
Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%) 2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: 5% at 1 kHz) |
||||
Analog control | 1 (Setting range: 0 to 255) | |||
External analog input | 1 input (Resolution: 1/256, Input range: 0 to 10 V). Not isolated. |
Ordering Information
CPU Unit | Specifications | Model | Standards | |||
---|---|---|---|---|---|---|
Power supply |
Output method | Inputs | Outputs | |||
CP1L-M CPU Units with 40 Points | AC power supply | Relay output | 24 | 16 | CP1L-M40DR-A | UC1, N, L, CE |
DC power supply | CP1L-M40DR-D | |||||
Transistor output (sinking) | CP1L-M40DT-D | |||||
Transistor output (sourcing) | CP1L-M40DT1-D | |||||
CP1L-M CPU Units with 30 Points | AC power supply | Relay output | 18 | 12 | CP1L-M30DR-A | |
DC power supply | CP1L-M30DR-D | |||||
Transistor output (sinking) | CP1L-M30DT-D | |||||
Transistor output (sourcing) | CP1L-M30DT1-D | |||||
CP1L-L CPU Units with 20 Points | AC power supply | Relay output | 12 | 8 | CP1L-L20DR-A | |
DC power supply | CP1L-L20DR-D | |||||
Transistor output (sinking) | CP1L-L20DT-D | |||||
Transistor output (sourcing) | CP1L-L20DT1-D | |||||
CP1L-L CPU Units with 14 Points | AC power supply | Relay output | 8 | 6 | CP1L-L14DR-A | |
DC power supply | CP1L-L14DR-D | |||||
Transistor output (sinking) | CP1L-L14DT-D | |||||
Transistor output (sourcing) | CP1L-L14DT1-D |
Options for CPU Units
Name | Specifications | Model | Standards |
---|---|---|---|
RS-232C Option Board | For CPU Unit option port. | CP1W-CIF01 | UC1, N, L, CE |
RS-422A/485 Option Board | For CPU Unit option port. | CP1W-CIF11 | |
Memory Cassette | Can be used for backing up programs or auto-booting. | CP1W-ME05M |
Programming Devices
Name | Specifications | Model | Standards | |
---|---|---|---|---|
CX-One FA Integrated Tool Package Ver. 2.0 |
CX-One is a package that integrates the Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS:Windows 98SE, Me, NT 4.0 (Service Pack 6a), 2000 (Service Pack 3 or higher), or XP *CX-Thermo runs only on Windows 2000 (Service Pack 3 or higher) or XP. CX-One Ver. 2.0 includes CX-Programmer Ver. 7.@. For details, refer to the CX-One catalog (Cat. No. R134). *The software is provided on CDs for the CXONE-AL@@C-@EV2 and on DVD for the CXONE-AL@@D-@EV2. *Site licenses are available for users who must run the CX-One on many computers. Ask your OMRON representative for details. |
1 license | CXONE-AL01C-EV2 CXONE-AL01D-EV2 | - |
3 license | CXON E-AL03C-EV2 CXON E-AL03 D-EV2 |
|||
10 license | CXONE-AL10C-EV2 CXONE-AL10D-EV2 | |||
50 license | CXON E-AL50C-EV2 CXONE-AL50D-EV2 | |||
USB Programming cable | A-type male to B-type male (Length: 1.8 m) | CP1W-CN221 | - | |
Programming Device Connecting Cable for CP1W-CIF01 RS-232C Option Board |
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | For anti-static connectors |
XW2Z-200S-CV | - |
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-CV | |||
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | XW2Z-200S-V | |||
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-V | |||
USB-Serial Conversion Cable (See note) |
USB-RS-232C Conversion Cable (Length: 0.5 m) and PC driver (on a CD-ROM disc) are included. Complies with USB Specification 1.1 On personal computer side: USB (A plug connector, male) On PLC side: RS-232C (D-sub 9-pin, male) Driver: Supported by Windows 98, Me, 2000, and XP |
CS1W-CIF31 |
Note:
1. Cannot be used with a peripheral USB port.
2. CP1L PLCs are supported by CX-Programmer version 7.1 or higher.
Name | Output method | Inputs | Outputs | Model | Standards |
---|---|---|---|---|---|
Expansion I/O Units |
Relay | 24 | 16 | CP1W-40EDR | N, L, CE |
Transistor (sinking) | CP1W-40EDT | ||||
Transistor output (sourcing) | CP1W-40EDT1 | ||||
Relay | 12 | 8 | CP1W-20EDR1 | U, C, L, CE | |
Transistor (sinking) | CP1W-20EDT | U, C, N, L, CE | |||
Transistor output (sourcing) | CP1W-20EDT1 | ||||
Relay | — | 16 | CP1W16ER | CE | |
— | 8 | — | CP1W-8ED | U, C, N, L, CE | |
Relay | — | 8 | CP1W-8ER | ||
Transistor (sinking) | - | 8 | CP1W-8ET | ||
Transistor output (sourcing) | CP1W-8ET1 | ||||
Analog Input Unit | Analog (resolution: 1/6000) | 4 | — | CP1W-AD041 | UC1, CE |
Analog Output Unit |
Analog (resolution: 1/6000) | - | 4 | CP1W-DA041 | UC1, CE |
Analog I/O Unit |
Analog (resolution: 1/6000) | 2 | 1 | CP1W-MAD11 | U, C, N, CE |
CompoBus/S I/O Link Unit |
- | 8 (I/O link input bits) |
8 (I/O link input bits) |
CP1WSRT21 | U, C, N, L, CE |
Temperature Sensor Unit |
2 thermocouple inputs | CP1W-TS001 | U, C, N, L, CE | ||
4 thermocouple inputs | CP1W-TS002 | ||||
2 platinum resistance thermometer inputs | CP1W-TS101 | ||||
4 platinum resistance thermometer inputs | CP1W-TS102 |
Відправити запит
Ви зацікавлені у цьому продукті? Вам потрібна додаткова інформація або індивідуальні розцінки?
Зв'яжіться з нами
ZAPYTAJ O PRODUKT
close
Wiadomość wysłana poprawnie.
ZAPYTAJ O PRODUKT
close
Ви повинні увійти в систему
When it comes to controllers for compact machines, Omron's new CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. But this new and exciting range is not only compact, it is scaleable, has a faster processing speed than other controllers and is in a class of its own when it comes to price/performance. Naturally, it is compatible with all other devices in the Omron PLC line up.
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
CPU Units
Typ | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) | |
---|---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ | |
Control method | Stored program method | ||||
I/O control method | Cyclic scan with immediate refreshing | ||||
Program language | Ladder diagram | ||||
Function blocks | Maximum number of function block definitions: 128 Maximum number of instances: 256 Languages usable in function block definitions: Ladder diagrams, structured text (ST) |
||||
Instruction length | 1 to 7 steps per instruction | ||||
Instructions | Approx. 500 (function codes: 3 digits) | ||||
Instruction execution time | Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min. | ||||
Common processing time | |||||
Program capacity | 10K steps | 5K steps | |||
Number of tasks | 288 (32 cyclic tasks and 256 interrupt tasks) | ||||
Scheduled interrupt tasks |
1 (interrupt task No. 2, fixed) | ||||
Input interrupt tasks |
6 (interrupt task No. 140 to 145, fixed) | 4 (interrupt task No. 140 to 143, fixed) |
|||
(Mogq bye także określane i wykonywane zadania przerwaniowe szybkiego licznika.) | |||||
Maximum subroutine number | 256 | ||||
Maximum jump number | 256 | ||||
I/O areas |
Input bits | 24: CIO 0.00 to CIO 0.11 and CIO 1.00 to CIO 1.11 |
18: CIO 0.00 to CIO 0.11 and |
12: CIO 0.00 to CIO 0.11 | 8: CIO 0.00 to CIO 0.07 |
Output bits | 16: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.07 |
12: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.033 |
8: CIO 100.00 to CIO 100.07 | 6: CIO 100.00 to CIO 100.05 | |
1:1 Link Area | 1,024 bits (64 words): CIO 3000.00 to CIO 3063.15 (CIO 3000 to CIO 3063) | ||||
Serial PLC Link Area |
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189) | ||||
Work bits | 8,192 bits (512 words): W000.00 to W511.15 (W0 to W511) CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143) |
||||
TR Area | 16 bits: TR0 to TR15 | ||||
Holding Area | 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511) | ||||
AR Area | Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959) |
||||
Timers | 4,096 bits: T0 to T4095 | ||||
Counters | 4,096 bits: C0 to C4095 | ||||
DM Area | 32 Kwords: D0 to D32767 | 10 Kwords: D0 to D9999, D32000 to D32767 | |||
Data Register Area | 16 registers (16 bits): DR0 to DR15 | ||||
Index Register Area | 16 registers (32 bits): IR0 to IR15 | ||||
Task Flag Area | 32 flags (32 bits): TK0000 to TK0031 |
Type | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) |
---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ |
Trace Memory | 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.) | |||
Memory Cassette | A special Memory Cassette (CP1W-ME05M) can be mounted. Note: Can be used for program backups and auto-booting. | |||
Clock function | Supported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 55C), -2.0 min to +2.0 min (ambient temperature: 25°C), -2.5 min to +1.5 min (ambient temperature: 0°C) |
|||
Communications functions | One built-in peripheral port (USB 1.1): For connecting Support Software only | |||
A maximum of two Serial Communications Option Boards can be mounted. |
A maximum of one Serial Communications Option Board can be mounted | |||
Memory backup | Flash memory: User programs, parameters (such as the PLC Setup), comment data, and the entire DM Area can be saved to flash memory as initial values. Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a battery. |
|||
Battery service life | 5 years at 25C. (Use the replacement battery within two years of manufacture.) | |||
Built-in input terminals | 40 (24 inputs, 16 outputs) | 30 (18 inputs, 12 outputs) | 20 (12 inputs, 8 outputs) | 14 (8 inputs, 6 outputs) |
Number of connectable Expansion Units and Expansion I/O Units |
CP-series Expansion Unit and Expansion I/O Units: 3 max. | CP-series Expansion Units and Expansion I/O Units: 1 max. | ||
Max. number of I/O points | 160 (40 built in + 40 per Expansion (I/O) Unit 3 Units) |
150 (30 built in + 40 per Expansion (I/O) Unit 3 Units) |
60 (20 built in + 40 per Expansion (I/O) Unit 1 Unit) |
54 (14 built in + 40 per Expansion (I/O) Unit 1 Unit) |
Interrupt inputs | 6 inputs (Response time: 0.3 ms) | 4 inputs (Response time: 0.3 ms) |
||
Interrupt inputs counter mode | 6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
4 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
||
Quick-response inputs | 6 points (Min. input pulse width: 50 μs max.) | 4 points (Min. input pulse width: 50 μs max.) |
||
Scheduled interrupts | 1 | |||
High-speed counters | 4 counters, 2 axes (24-VDC input) 4 inputs: Differential phases (4x), 50 kHz or Single-phase (pulse plus direction, up/down, increment), 100 kHz Value range: 32 bits, Linear mode or ring mode Interrupts: Target value comparison or range comparison |
|||
Pulse outputs (models with transistor outputs only) |
Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed) 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction) |
|||
Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%) 2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: 5% at 1 kHz) |
||||
Analog control | 1 (Setting range: 0 to 255) | |||
External analog input | 1 input (Resolution: 1/256, Input range: 0 to 10 V). Not isolated. |
Ordering Information
CPU Unit | Specifications | Model | Standards | |||
---|---|---|---|---|---|---|
Power supply |
Output method | Inputs | Outputs | |||
CP1L-M CPU Units with 40 Points | AC power supply | Relay output | 24 | 16 | CP1L-M40DR-A | UC1, N, L, CE |
DC power supply | CP1L-M40DR-D | |||||
Transistor output (sinking) | CP1L-M40DT-D | |||||
Transistor output (sourcing) | CP1L-M40DT1-D | |||||
CP1L-M CPU Units with 30 Points | AC power supply | Relay output | 18 | 12 | CP1L-M30DR-A | |
DC power supply | CP1L-M30DR-D | |||||
Transistor output (sinking) | CP1L-M30DT-D | |||||
Transistor output (sourcing) | CP1L-M30DT1-D | |||||
CP1L-L CPU Units with 20 Points | AC power supply | Relay output | 12 | 8 | CP1L-L20DR-A | |
DC power supply | CP1L-L20DR-D | |||||
Transistor output (sinking) | CP1L-L20DT-D | |||||
Transistor output (sourcing) | CP1L-L20DT1-D | |||||
CP1L-L CPU Units with 14 Points | AC power supply | Relay output | 8 | 6 | CP1L-L14DR-A | |
DC power supply | CP1L-L14DR-D | |||||
Transistor output (sinking) | CP1L-L14DT-D | |||||
Transistor output (sourcing) | CP1L-L14DT1-D |
Options for CPU Units
Name | Specifications | Model | Standards |
---|---|---|---|
RS-232C Option Board | For CPU Unit option port. | CP1W-CIF01 | UC1, N, L, CE |
RS-422A/485 Option Board | For CPU Unit option port. | CP1W-CIF11 | |
Memory Cassette | Can be used for backing up programs or auto-booting. | CP1W-ME05M |
Programming Devices
Name | Specifications | Model | Standards | |
---|---|---|---|---|
CX-One FA Integrated Tool Package Ver. 2.0 |
CX-One is a package that integrates the Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS:Windows 98SE, Me, NT 4.0 (Service Pack 6a), 2000 (Service Pack 3 or higher), or XP *CX-Thermo runs only on Windows 2000 (Service Pack 3 or higher) or XP. CX-One Ver. 2.0 includes CX-Programmer Ver. 7.@. For details, refer to the CX-One catalog (Cat. No. R134). *The software is provided on CDs for the CXONE-AL@@C-@EV2 and on DVD for the CXONE-AL@@D-@EV2. *Site licenses are available for users who must run the CX-One on many computers. Ask your OMRON representative for details. |
1 license | CXONE-AL01C-EV2 CXONE-AL01D-EV2 | - |
3 license | CXON E-AL03C-EV2 CXON E-AL03 D-EV2 |
|||
10 license | CXONE-AL10C-EV2 CXONE-AL10D-EV2 | |||
50 license | CXON E-AL50C-EV2 CXONE-AL50D-EV2 | |||
USB Programming cable | A-type male to B-type male (Length: 1.8 m) | CP1W-CN221 | - | |
Programming Device Connecting Cable for CP1W-CIF01 RS-232C Option Board |
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | For anti-static connectors |
XW2Z-200S-CV | - |
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-CV | |||
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | XW2Z-200S-V | |||
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-V | |||
USB-Serial Conversion Cable (See note) |
USB-RS-232C Conversion Cable (Length: 0.5 m) and PC driver (on a CD-ROM disc) are included. Complies with USB Specification 1.1 On personal computer side: USB (A plug connector, male) On PLC side: RS-232C (D-sub 9-pin, male) Driver: Supported by Windows 98, Me, 2000, and XP |
CS1W-CIF31 |
Note:
1. Cannot be used with a peripheral USB port.
2. CP1L PLCs are supported by CX-Programmer version 7.1 or higher.
Name | Output method | Inputs | Outputs | Model | Standards |
---|---|---|---|---|---|
Expansion I/O Units |
Relay | 24 | 16 | CP1W-40EDR | N, L, CE |
Transistor (sinking) | CP1W-40EDT | ||||
Transistor output (sourcing) | CP1W-40EDT1 | ||||
Relay | 12 | 8 | CP1W-20EDR1 | U, C, L, CE | |
Transistor (sinking) | CP1W-20EDT | U, C, N, L, CE | |||
Transistor output (sourcing) | CP1W-20EDT1 | ||||
Relay | — | 16 | CP1W16ER | CE | |
— | 8 | — | CP1W-8ED | U, C, N, L, CE | |
Relay | — | 8 | CP1W-8ER | ||
Transistor (sinking) | - | 8 | CP1W-8ET | ||
Transistor output (sourcing) | CP1W-8ET1 | ||||
Analog Input Unit | Analog (resolution: 1/6000) | 4 | — | CP1W-AD041 | UC1, CE |
Analog Output Unit |
Analog (resolution: 1/6000) | - | 4 | CP1W-DA041 | UC1, CE |
Analog I/O Unit |
Analog (resolution: 1/6000) | 2 | 1 | CP1W-MAD11 | U, C, N, CE |
CompoBus/S I/O Link Unit |
- | 8 (I/O link input bits) |
8 (I/O link input bits) |
CP1WSRT21 | U, C, N, L, CE |
Temperature Sensor Unit |
2 thermocouple inputs | CP1W-TS001 | U, C, N, L, CE | ||
4 thermocouple inputs | CP1W-TS002 | ||||
2 platinum resistance thermometer inputs | CP1W-TS101 | ||||
4 platinum resistance thermometer inputs | CP1W-TS102 |