shopping_cart
Karte
0,00 PLN
0
Zwischenablage
Sie müssen eingeloggt sein
Menu
-
zurückX
-
Komponenten
-
-
Category
-
Halbleiter
- Dioden
- Thyristoren
-
Elektroisolierte Module
- Elektroisolierte Module | VISHAY (IR)
- Elektroisolierte Module | INFINEON (EUPEC)
- Elektroisolierte Module | Semikron
- Elektroisolierte Module | POWEREX
- Elektroisolierte Module IXYS
- Elektroisolierte Module | POSEICO
- Elektroisolierte Module ABB
- Elektroisolierte Module | TECHSEM
- Gehen Sie zur Unterkategorie
- Brückengleichrichter
-
Transistoren
- Transistoren | GeneSiC
- SiC-MOSFET-Module | Mitsubishi
- SiC-MOSFET-Module | STARPOWER
- ABB SiC-MOSFET-Module
- IGBT-Module | MITSUBISHI
- Transistormodule | MITSUBISHI
- MOSFET-Module von MITSUBISHI
- Transistormodule | ABB
- IGBT-Module | POWEREX
- IGBT-Module | INFINEON (EUPEC)
- Halbleiterkomponente aus Siziliumkarbid
- Gehen Sie zur Unterkategorie
- Treiber
- Leistungsblöcke
- Gehen Sie zur Unterkategorie
-
Strom- und Spannungswandler von LEM
-
Stromwandler von LEM
- Stromwandler mit geschlossener Rückkopplungsschleife (C / L)
- Stromwandler mit offener Rückkopplungsschleife (O / L)
- Stromwandler mit unipolarer Spannung
- Wandler in der Eta-Technologie
- Hochgenaue Stromwandler der Serie LF xx10
- Stromwandler der Serie LH
- HOYS und HOYL - zur direkten Montage auf einer Leiterschiene
- Stromwandler in der SMD-Technologie der Serien GO-SME und GO-SMS
- AUTOMOBIL-Stromwandler
- Gehen Sie zur Unterkategorie
- Spannungswandler | LEM
- Wandler zum Schutz, zur Überwachung und Steuerung | LEM
- Split-Core-Wandler | LEM
- Präzisionsstromwandler | LEM
- Gehen Sie zur Unterkategorie
-
Stromwandler von LEM
-
Passive Elemente (Kondensatoren, Widerstände, Sicherungen, Filter)
- Widerstände
-
Sicherungen
- Miniatursicherungen für elektronische Schaltungen der Serien ABC und AGC
- Schnelle Röhrensicherungen
- Zeitverzögerungssicherungen mit GL / GG- und AM-Eigenschaften
- Ultraschnelle Sicherungseinsätze
- Britische und amerikanische schnelle Sicherungen
- Schnelle europäische Sicherungen
- Traktionssicherungen
- Hochspannungs-Sicherungseinsätze
- Gehen Sie zur Unterkategorie
-
Kondensatoren
- Kondensatoren für Motoren
- Elektrolytkondensator
- Island Filmkondensatoren
- Leistungskondensatoren
- Kondensatoren für Gleichstromkreise
- Kondensatoren zur Leistungskompensation
- Hochspannungskondensatoren
- Induktionsheizkondensatoren
- Impulskondensatoren
- DC LINK-Kondensatoren
- Kondensatoren für AC / DC-Schaltungen
- Gehen Sie zur Unterkategorie
- Entstörungsfilter
- Superkondensatoren
-
Überspannungsschutz
- Überspannungsableiter für HF-Anwendungen
- Überspannungsableiter für Bildverarbeitungssysteme
- Überspannungsableiter für Stromleitungen
- Überspannungsableiter für LED
- Überspannungsableiter für die Photovoltaik
- Überspannungsableiter für Wägesysteme
- Überspannungsableiter für den Feldbus
- Gehen Sie zur Unterkategorie
- Gehen Sie zur Unterkategorie
-
Relais und Schütze
- Theorie der Relais und Schütze
- Dreiphasen-Halbleiterrelais AC
- Halbleiterrelais DC
- Regler, Steuerungen und Zubehör
- Sanftstarter und Schaltschütze
- Elektromechanische Relais
- Schütze
- Drehschalter
-
Einphasen-Halbleiterrelais AC
- Einphasen-Wechselstrom-Halbleiterrelais, Serie 1 | D2425 | D2450
- Einphasige AC-Halbleiterrelais der Serien CWA und CWD
- Einphasen-Wechselstrom-Halbleiterrelais der Serien CMRA und CMRD
- Einphasen-Wechselstrom-Halbleiterrelais, PS-Serie
- Doppel- und Vierfach-Wechselstrom-Halbleiterrelais, Serie D24 D, TD24 Q, H12D48 D.
- 1-phasige Festkörperrelais, gn-Serie
- Einphasige Wechselstrom-Halbleiterrelais, Serie ckr
- Einphasen-Wechselstromrelais der ERDA- UND ERAA-SERIE für die DIN-Schiene
- Einphasige Wechselstromrelais für 150A Strom
- Doppelte Halbleiterrelais mit integriertem Kühlkörper für eine DIN-Schiene
- Gehen Sie zur Unterkategorie
- Einphasen-Halbleiterrelais AC für Leiterplatten
- Interface-Relais
- Gehen Sie zur Unterkategorie
- Induktive Komponente
- Radiatoren, Varistoren, Thermoschütze
- Ventilatoren
- Klimaanlagen, Ausrüstung für Schaltschränke, Industriekühler
-
Batterien, Ladegeräte, Pufferstromversorgungen und Wechselrichter
- Batterien, Ladegeräte - theoretische Beschreibung
- Lithium-Ionen-Batterien. Kundenspezifische Batterien. Batteriemanagementsystem (BMS)
- Batterien
- Ladegeräte und Zubehör
- USV-Notstromversorgung und Pufferstromversorgung
- Konverter und Zubehör für die Photovoltaik
- Energiespeicher
- Brennstoffzellen
- Lithium-Ionen-Batterien
- Gehen Sie zur Unterkategorie
-
Automation
- Grenzschalter, Microschalter
- Sensoren, Wandler
-
Pyrometer
- Infrarot-Temperatursensor, kabellos, wasserdicht, IR-TE-Serie
- Infrarot-Temperatursensor, kabellos, IR-TA-Serie
- Infrarot-Temperatursensor, kabellos, IR-H-Serie
- Ein schnelles stationäres Pyrometer in einem sehr kleinen IR-BA-Gehäuse
- Lichtleiter-Temperatursensoren, IR-FA-Serie
- Das stationäre Pyrometer der IR-BZ-Serie
- Gehen Sie zur Unterkategorie
- Zähler, Zeitrelais, Einbaumessgeräte
- Industrielle Schutzausrüstung
- Licht- und Signalentechnik
- Infrarot-Kamera
- LED-Anzeigen
- Taster, Schalter und Zubehör
-
Datenerfassung und Datenlogger
- Temperaturschreiber mit Display und Textdruck AL3000
- Digitale Temperaturschreiber mit LCD Display KR 2000-Serie
- Sicherheitstemperaturwächter KR 5000
- Temperatur / Feuchtigkeit Hand-Meter mit Datenlogger HN-CH-Serie
- Messdatenerfassung und Datenlogger Zubehör
- Kompakter Bildschirmschreiber 71VR1
- Sicherheitstemperaturwächter KR 3000-Serie
- PC-Datenerfassung R1M-Serie
- PC-Datenerfassung R2M-Serie
- PC-Datenerfassung, 12 universelle isolierte Eingänge, Typ RZMS-U9
- PC-Datenerfassung, 12 universelle isolierte Eingänge, USB, RZUS-Serie
- Gehen Sie zur Unterkategorie
- Steuerungen
- Gehen Sie zur Unterkategorie
-
Adern, Litzen, Schutzhüllen, Flexible Verbingungen
- Drähte
- Litzen
-
Kabel für spezielle Anwendungen
- Verlängerungskabel und Kompensations
- Kabel für Thermoelemente
- Die Verbindungsdrähte zu czyjnków PT
- Mehradrige Kabel Temp. -60 ° C bis + 1400 ° C
- SILICOUL Mittelspannungskabeln
- Zündkabel
- Heizleitungen
- Einadriges Temp. -60 ° C bis + 450 ° C
- Zugbegleiter
- Heizleitungen im Ex
- Gehen Sie zur Unterkategorie
- Schläuche
-
Geflochtene Kabel
- Zöpfe flach
- Zöpfen Runde
- Sehr flexible Geflecht - flach
- Sehr flexible Geflecht - Rund
- Kupfergeflecht zylindrischen
- Kupfergeflechtschirm und zylindrischer
- Flexible Massebänder
- Geflechte zylindrischen verzinkt und Edelstahl
- PVC-isolierte Kupferlitzen - Temperatur 85 ° C
- Flach geflochtene Aluminium
- Connection Kit - Zöpfe und Röhren
- Gehen Sie zur Unterkategorie
- Leitungen und Sonstiges für Traktion
- Crimpverbinder
- Flexible isolierte Kupferschienen
- Mehrschichte flexible Kupferschienen
- Kabelrohre, Kabelkanäle und Kabelführung
- Kabelschutzschlauchsysteme
- Gehen Sie zur Unterkategorie
- Alle Kategorien
-
Halbleiter
-
-
- Lieferanten
-
Applications
- AC- und DC-Antriebe (Wechselrichter)
- Ausrüstung für Verteilungs-, Steuerungs- und Telekommunikationsschränke
- Bergbau, Metallurgie und Gründung
- CNC-Werkzeugmaschinen
- HLK-Automatisierung
- Induktionsheizung
- Industrielle Automatisierung
- Industrielle Automatisierung
- Industrielle Schutzvorrichtungen
- Komponenten für explosionsgefährdete Bereiche (EX)
- Maschinen zum Tiefziehen von Kunststoffen
- Maschinen zum Trocknen und Verarbeiten von Holz
- Motoren und Transformatoren
- Schweißmaschinen und Schweißmaschinen
- Straßenbahn- und Bahntraktion
- Temperaturmessung und -regelung
- Temperaturmessung und -regelung
- USV- und Gleichrichtersysteme
-
Installation
-
-
Montaż urządzeń
- Schaltschränkebau
- Design und Montage von Schränken
- Installation von Stromversorgungssystemen
- Leistungselektronik Vorrichtungen
- Maschinen, die auf Bestellung gebaut werden
- F&E-Forschungs- und Entwicklungsarbeiten
-
Produktionsprozessen Messungsanlagen
- Dioden und Thyristoren Messungsanlagen
- Schaltungen Messungsanlagen
- Varistor- und Überspannungsableiter-Tester
- Messungsanlagen für Kfz-Sicherungen
- Qr Sperrverzögerungsladung Messungsanlagen
- FD-Serie Schaltungen Rotorentester
- Audit-Messungsanlagen der Fehlerstromschutzschalter
- Tester für Kalibrierung der Relais
- Anlage für Video Qualitätskontrollsysteme
- Hochstrom-Thyristorschalter
- Maschenbruch-Tester
- Gehen Sie zur Unterkategorie
- Alle Kategorien
-
-
-
Inductors
-
-
Modernizacja induktorów
- Reparatur gebrauchter Induktivitäten
- Modernisierung von Induktoren
-
Produktion neuer Induktoren
- Härten von Kurbelwellen
- Aushärten der Bandsägezähne
- Erwärmung der Elemente vor dem Verkleben
- Härtung von Laufbahnen von Radnabenlagern für Kraftfahrzeuge
- Härtung der Antriebsgetriebekomponenten
- Härten von Stufenwellen
- Erwärmung in Kontraktionsfugen
- Scan-Härtung
- Weichlöten
- Knüppelheizungen
- Gehen Sie zur Unterkategorie
- Wissensbasis
- Alle Kategorien
-
-
-
Induktionsgeräte
-
-
Urządzenia indukcyjne
-
Generatoren für Induktionserwärmung
-
Ambrell Induktionsheizgeneratoren
- Generatoren: Leistung 500 W, Frequenz 150-400 kHz
- Generatoren: Leistung 1.2 - 2.4 kW, Frequenz 150 - 400 kHz
- Generatoren: Leistung 4.2 - 10 kW, Frequenz 150 - 400 kHz
- Generatoren: Leistung 10 - 15 kW, Frequenz 50 - 150 kHz
- Generatoren: Leistung 30-45 kW, Frequenz 50-150 kHz
- Generatoren: Leistung 65-135 kW, Frequenz 50-150 kHz
- Generatoren: Leistung 180-270 kW, Frequenz 50-150 kHz
- Generatoren: Leistung 20-35-50 kW, Frequenz 15-45 kHz
- Generatoren: Leistung 75-150 kW, Frequenz 15-45 kHz
- Generatoren: Leistung 200-500 kW, Frequenz 15-45 kHz
- Generatoren: Leistung 20-50 kW, Frequenz 5-15 kHz
- Gehen Sie zur Unterkategorie
- Denki Kogyo Induktionsheizungsgeneratoren
-
JKZ Induktionsheizungsgeneratoren
- Generatoren der CX-Serie, Frequenz: 50-120 kHz, Leistung: 5-25 kW
- Generatoren der SWS-Serie, Frequenz: 15-30 kHz, Leistung: 25-260 kW
- Generatoren (Öfen) zum Formen und Schmieden der MFS-Serie, Frequenz: 0,5-10 kHz, Leistung: 80-500 kW
- MFS-Schmelzöfen, Frequenz: 0,5-10 kHz, Leistung: 70-200 kW
- Generatoren der UHT-Serie, Frequenz: 200-400 kHz, Leistung: 10-160 kW
- Gehen Sie zur Unterkategorie
- Lampengeneratoren für Induktionsheizung
- Himmelwerk Induktionsheizungsgeneratoren
- Gehen Sie zur Unterkategorie
-
Ambrell Induktionsheizgeneratoren
- Reparaturen und Modernisierung
- Peripheriegeräte
-
Applikationen
- Medizinische Anwendungen
- Automobilindustrie Applikationen
- Löten
- Hartlöten
- Hartlöten von Aluminium
- Löten von magnetischen Edelstahlwerkzeugen
- Präzisionslöten
- Löten unter Atmosphäre
- Löten von Kühlkörperkappen aus Messing und Stahl
- Löten von Sintercarbiden
- Löten der Kupferspitze und des Drahtes
- Gehen Sie zur Unterkategorie
- Wissensbasis
- Alle Kategorien
-
Generatoren für Induktionserwärmung
-
-
-
Service
-
- Kontakt
- Zobacz wszystkie kategorie
Fotos dienen nur zu Informationszwecken.
please use latin characters
When it comes to controllers for compact machines, Omron's new CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. But this new and exciting range is not only compact, it is scaleable, has a faster processing speed than other controllers and is in a class of its own when it comes to price/performance. Naturally, it is compatible with all other devices in the Omron PLC line up.
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
CPU Units
Typ | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) | |
---|---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ | |
Control method | Stored program method | ||||
I/O control method | Cyclic scan with immediate refreshing | ||||
Program language | Ladder diagram | ||||
Function blocks | Maximum number of function block definitions: 128 Maximum number of instances: 256 Languages usable in function block definitions: Ladder diagrams, structured text (ST) |
||||
Instruction length | 1 to 7 steps per instruction | ||||
Instructions | Approx. 500 (function codes: 3 digits) | ||||
Instruction execution time | Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min. | ||||
Common processing time | |||||
Program capacity | 10K steps | 5K steps | |||
Number of tasks | 288 (32 cyclic tasks and 256 interrupt tasks) | ||||
Scheduled interrupt tasks |
1 (interrupt task No. 2, fixed) | ||||
Input interrupt tasks |
6 (interrupt task No. 140 to 145, fixed) | 4 (interrupt task No. 140 to 143, fixed) |
|||
(Mogq bye także określane i wykonywane zadania przerwaniowe szybkiego licznika.) | |||||
Maximum subroutine number | 256 | ||||
Maximum jump number | 256 | ||||
I/O areas |
Input bits | 24: CIO 0.00 to CIO 0.11 and CIO 1.00 to CIO 1.11 |
18: CIO 0.00 to CIO 0.11 and |
12: CIO 0.00 to CIO 0.11 | 8: CIO 0.00 to CIO 0.07 |
Output bits | 16: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.07 |
12: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.033 |
8: CIO 100.00 to CIO 100.07 | 6: CIO 100.00 to CIO 100.05 | |
1:1 Link Area | 1,024 bits (64 words): CIO 3000.00 to CIO 3063.15 (CIO 3000 to CIO 3063) | ||||
Serial PLC Link Area |
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189) | ||||
Work bits | 8,192 bits (512 words): W000.00 to W511.15 (W0 to W511) CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143) |
||||
TR Area | 16 bits: TR0 to TR15 | ||||
Holding Area | 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511) | ||||
AR Area | Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959) |
||||
Timers | 4,096 bits: T0 to T4095 | ||||
Counters | 4,096 bits: C0 to C4095 | ||||
DM Area | 32 Kwords: D0 to D32767 | 10 Kwords: D0 to D9999, D32000 to D32767 | |||
Data Register Area | 16 registers (16 bits): DR0 to DR15 | ||||
Index Register Area | 16 registers (32 bits): IR0 to IR15 | ||||
Task Flag Area | 32 flags (32 bits): TK0000 to TK0031 |
Type | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) |
---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ |
Trace Memory | 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.) | |||
Memory Cassette | A special Memory Cassette (CP1W-ME05M) can be mounted. Note: Can be used for program backups and auto-booting. | |||
Clock function | Supported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 55C), -2.0 min to +2.0 min (ambient temperature: 25°C), -2.5 min to +1.5 min (ambient temperature: 0°C) |
|||
Communications functions | One built-in peripheral port (USB 1.1): For connecting Support Software only | |||
A maximum of two Serial Communications Option Boards can be mounted. |
A maximum of one Serial Communications Option Board can be mounted | |||
Memory backup | Flash memory: User programs, parameters (such as the PLC Setup), comment data, and the entire DM Area can be saved to flash memory as initial values. Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a battery. |
|||
Battery service life | 5 years at 25C. (Use the replacement battery within two years of manufacture.) | |||
Built-in input terminals | 40 (24 inputs, 16 outputs) | 30 (18 inputs, 12 outputs) | 20 (12 inputs, 8 outputs) | 14 (8 inputs, 6 outputs) |
Number of connectable Expansion Units and Expansion I/O Units |
CP-series Expansion Unit and Expansion I/O Units: 3 max. | CP-series Expansion Units and Expansion I/O Units: 1 max. | ||
Max. number of I/O points | 160 (40 built in + 40 per Expansion (I/O) Unit 3 Units) |
150 (30 built in + 40 per Expansion (I/O) Unit 3 Units) |
60 (20 built in + 40 per Expansion (I/O) Unit 1 Unit) |
54 (14 built in + 40 per Expansion (I/O) Unit 1 Unit) |
Interrupt inputs | 6 inputs (Response time: 0.3 ms) | 4 inputs (Response time: 0.3 ms) |
||
Interrupt inputs counter mode | 6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
4 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
||
Quick-response inputs | 6 points (Min. input pulse width: 50 μs max.) | 4 points (Min. input pulse width: 50 μs max.) |
||
Scheduled interrupts | 1 | |||
High-speed counters | 4 counters, 2 axes (24-VDC input) 4 inputs: Differential phases (4x), 50 kHz or Single-phase (pulse plus direction, up/down, increment), 100 kHz Value range: 32 bits, Linear mode or ring mode Interrupts: Target value comparison or range comparison |
|||
Pulse outputs (models with transistor outputs only) |
Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed) 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction) |
|||
Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%) 2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: 5% at 1 kHz) |
||||
Analog control | 1 (Setting range: 0 to 255) | |||
External analog input | 1 input (Resolution: 1/256, Input range: 0 to 10 V). Not isolated. |
Ordering Information
CPU Unit | Specifications | Model | Standards | |||
---|---|---|---|---|---|---|
Power supply |
Output method | Inputs | Outputs | |||
CP1L-M CPU Units with 40 Points | AC power supply | Relay output | 24 | 16 | CP1L-M40DR-A | UC1, N, L, CE |
DC power supply | CP1L-M40DR-D | |||||
Transistor output (sinking) | CP1L-M40DT-D | |||||
Transistor output (sourcing) | CP1L-M40DT1-D | |||||
CP1L-M CPU Units with 30 Points | AC power supply | Relay output | 18 | 12 | CP1L-M30DR-A | |
DC power supply | CP1L-M30DR-D | |||||
Transistor output (sinking) | CP1L-M30DT-D | |||||
Transistor output (sourcing) | CP1L-M30DT1-D | |||||
CP1L-L CPU Units with 20 Points | AC power supply | Relay output | 12 | 8 | CP1L-L20DR-A | |
DC power supply | CP1L-L20DR-D | |||||
Transistor output (sinking) | CP1L-L20DT-D | |||||
Transistor output (sourcing) | CP1L-L20DT1-D | |||||
CP1L-L CPU Units with 14 Points | AC power supply | Relay output | 8 | 6 | CP1L-L14DR-A | |
DC power supply | CP1L-L14DR-D | |||||
Transistor output (sinking) | CP1L-L14DT-D | |||||
Transistor output (sourcing) | CP1L-L14DT1-D |
Options for CPU Units
Name | Specifications | Model | Standards |
---|---|---|---|
RS-232C Option Board | For CPU Unit option port. | CP1W-CIF01 | UC1, N, L, CE |
RS-422A/485 Option Board | For CPU Unit option port. | CP1W-CIF11 | |
Memory Cassette | Can be used for backing up programs or auto-booting. | CP1W-ME05M |
Programming Devices
Name | Specifications | Model | Standards | |
---|---|---|---|---|
CX-One FA Integrated Tool Package Ver. 2.0 |
CX-One is a package that integrates the Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS:Windows 98SE, Me, NT 4.0 (Service Pack 6a), 2000 (Service Pack 3 or higher), or XP *CX-Thermo runs only on Windows 2000 (Service Pack 3 or higher) or XP. CX-One Ver. 2.0 includes CX-Programmer Ver. 7.@. For details, refer to the CX-One catalog (Cat. No. R134). *The software is provided on CDs for the CXONE-AL@@C-@EV2 and on DVD for the CXONE-AL@@D-@EV2. *Site licenses are available for users who must run the CX-One on many computers. Ask your OMRON representative for details. |
1 license | CXONE-AL01C-EV2 CXONE-AL01D-EV2 | - |
3 license | CXON E-AL03C-EV2 CXON E-AL03 D-EV2 |
|||
10 license | CXONE-AL10C-EV2 CXONE-AL10D-EV2 | |||
50 license | CXON E-AL50C-EV2 CXONE-AL50D-EV2 | |||
USB Programming cable | A-type male to B-type male (Length: 1.8 m) | CP1W-CN221 | - | |
Programming Device Connecting Cable for CP1W-CIF01 RS-232C Option Board |
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | For anti-static connectors |
XW2Z-200S-CV | - |
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-CV | |||
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | XW2Z-200S-V | |||
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-V | |||
USB-Serial Conversion Cable (See note) |
USB-RS-232C Conversion Cable (Length: 0.5 m) and PC driver (on a CD-ROM disc) are included. Complies with USB Specification 1.1 On personal computer side: USB (A plug connector, male) On PLC side: RS-232C (D-sub 9-pin, male) Driver: Supported by Windows 98, Me, 2000, and XP |
CS1W-CIF31 |
Note:
1. Cannot be used with a peripheral USB port.
2. CP1L PLCs are supported by CX-Programmer version 7.1 or higher.
Name | Output method | Inputs | Outputs | Model | Standards |
---|---|---|---|---|---|
Expansion I/O Units |
Relay | 24 | 16 | CP1W-40EDR | N, L, CE |
Transistor (sinking) | CP1W-40EDT | ||||
Transistor output (sourcing) | CP1W-40EDT1 | ||||
Relay | 12 | 8 | CP1W-20EDR1 | U, C, L, CE | |
Transistor (sinking) | CP1W-20EDT | U, C, N, L, CE | |||
Transistor output (sourcing) | CP1W-20EDT1 | ||||
Relay | — | 16 | CP1W16ER | CE | |
— | 8 | — | CP1W-8ED | U, C, N, L, CE | |
Relay | — | 8 | CP1W-8ER | ||
Transistor (sinking) | - | 8 | CP1W-8ET | ||
Transistor output (sourcing) | CP1W-8ET1 | ||||
Analog Input Unit | Analog (resolution: 1/6000) | 4 | — | CP1W-AD041 | UC1, CE |
Analog Output Unit |
Analog (resolution: 1/6000) | - | 4 | CP1W-DA041 | UC1, CE |
Analog I/O Unit |
Analog (resolution: 1/6000) | 2 | 1 | CP1W-MAD11 | U, C, N, CE |
CompoBus/S I/O Link Unit |
- | 8 (I/O link input bits) |
8 (I/O link input bits) |
CP1WSRT21 | U, C, N, L, CE |
Temperature Sensor Unit |
2 thermocouple inputs | CP1W-TS001 | U, C, N, L, CE | ||
4 thermocouple inputs | CP1W-TS002 | ||||
2 platinum resistance thermometer inputs | CP1W-TS101 | ||||
4 platinum resistance thermometer inputs | CP1W-TS102 |
Senden Sie eine Anfrage
Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?
Kontaktiere uns
FRAGEN SIE NACH DEM PRODUKT
close
Nachricht erfolgreich gesendet.
FRAGEN SIE NACH DEM PRODUKT
close
Sie müssen eingeloggt sein
When it comes to controllers for compact machines, Omron's new CP1L series offers the compactness of a micro-PLC with the capability of a modular PLC. But this new and exciting range is not only compact, it is scaleable, has a faster processing speed than other controllers and is in a class of its own when it comes to price/performance. Naturally, it is compatible with all other devices in the Omron PLC line up.
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
• 4 high-speed encoder inputs and 2 high-speed pulse outputs
• CPUs with AC or DC supply and 14, 20, 30 or 40 I/O built-in
• Instruction set compatible with CP1H-, CJ1-, and CS1 series PLC
• Optional RS232C and RS-422A/485 serial ports
• USB programming port
• Scaleable with a wide range of I/O units (maximum up to 160 I/O points)
• Motion functionality
• One and the same software as other Omron controllers
CPU Units
Typ | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) | |
---|---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ | |
Control method | Stored program method | ||||
I/O control method | Cyclic scan with immediate refreshing | ||||
Program language | Ladder diagram | ||||
Function blocks | Maximum number of function block definitions: 128 Maximum number of instances: 256 Languages usable in function block definitions: Ladder diagrams, structured text (ST) |
||||
Instruction length | 1 to 7 steps per instruction | ||||
Instructions | Approx. 500 (function codes: 3 digits) | ||||
Instruction execution time | Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min. | ||||
Common processing time | |||||
Program capacity | 10K steps | 5K steps | |||
Number of tasks | 288 (32 cyclic tasks and 256 interrupt tasks) | ||||
Scheduled interrupt tasks |
1 (interrupt task No. 2, fixed) | ||||
Input interrupt tasks |
6 (interrupt task No. 140 to 145, fixed) | 4 (interrupt task No. 140 to 143, fixed) |
|||
(Mogq bye także określane i wykonywane zadania przerwaniowe szybkiego licznika.) | |||||
Maximum subroutine number | 256 | ||||
Maximum jump number | 256 | ||||
I/O areas |
Input bits | 24: CIO 0.00 to CIO 0.11 and CIO 1.00 to CIO 1.11 |
18: CIO 0.00 to CIO 0.11 and |
12: CIO 0.00 to CIO 0.11 | 8: CIO 0.00 to CIO 0.07 |
Output bits | 16: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.07 |
12: CIO 100.00 to CIO 100.07 and CIO 101.00 to CIO 101.033 |
8: CIO 100.00 to CIO 100.07 | 6: CIO 100.00 to CIO 100.05 | |
1:1 Link Area | 1,024 bits (64 words): CIO 3000.00 to CIO 3063.15 (CIO 3000 to CIO 3063) | ||||
Serial PLC Link Area |
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189) | ||||
Work bits | 8,192 bits (512 words): W000.00 to W511.15 (W0 to W511) CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143) |
||||
TR Area | 16 bits: TR0 to TR15 | ||||
Holding Area | 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511) | ||||
AR Area | Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959) |
||||
Timers | 4,096 bits: T0 to T4095 | ||||
Counters | 4,096 bits: C0 to C4095 | ||||
DM Area | 32 Kwords: D0 to D32767 | 10 Kwords: D0 to D9999, D32000 to D32767 | |||
Data Register Area | 16 registers (16 bits): DR0 to DR15 | ||||
Index Register Area | 16 registers (32 bits): IR0 to IR15 | ||||
Task Flag Area | 32 flags (32 bits): TK0000 to TK0031 |
Type | CP1L-M40 (40 points) | CP1L-M30 (30 points) | CP1L-L20 (20 points) | CP1L-L14 (14 points) |
---|---|---|---|---|
Item Models | CP1L-M40@@-@ | CP1L-M30@@-@ | CP1L-L20@@-@ | CP1L-L14@@-@ |
Trace Memory | 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.) | |||
Memory Cassette | A special Memory Cassette (CP1W-ME05M) can be mounted. Note: Can be used for program backups and auto-booting. | |||
Clock function | Supported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 55C), -2.0 min to +2.0 min (ambient temperature: 25°C), -2.5 min to +1.5 min (ambient temperature: 0°C) |
|||
Communications functions | One built-in peripheral port (USB 1.1): For connecting Support Software only | |||
A maximum of two Serial Communications Option Boards can be mounted. |
A maximum of one Serial Communications Option Board can be mounted | |||
Memory backup | Flash memory: User programs, parameters (such as the PLC Setup), comment data, and the entire DM Area can be saved to flash memory as initial values. Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a battery. |
|||
Battery service life | 5 years at 25C. (Use the replacement battery within two years of manufacture.) | |||
Built-in input terminals | 40 (24 inputs, 16 outputs) | 30 (18 inputs, 12 outputs) | 20 (12 inputs, 8 outputs) | 14 (8 inputs, 6 outputs) |
Number of connectable Expansion Units and Expansion I/O Units |
CP-series Expansion Unit and Expansion I/O Units: 3 max. | CP-series Expansion Units and Expansion I/O Units: 1 max. | ||
Max. number of I/O points | 160 (40 built in + 40 per Expansion (I/O) Unit 3 Units) |
150 (30 built in + 40 per Expansion (I/O) Unit 3 Units) |
60 (20 built in + 40 per Expansion (I/O) Unit 1 Unit) |
54 (14 built in + 40 per Expansion (I/O) Unit 1 Unit) |
Interrupt inputs | 6 inputs (Response time: 0.3 ms) | 4 inputs (Response time: 0.3 ms) |
||
Interrupt inputs counter mode | 6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
4 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down counters |
||
Quick-response inputs | 6 points (Min. input pulse width: 50 μs max.) | 4 points (Min. input pulse width: 50 μs max.) |
||
Scheduled interrupts | 1 | |||
High-speed counters | 4 counters, 2 axes (24-VDC input) 4 inputs: Differential phases (4x), 50 kHz or Single-phase (pulse plus direction, up/down, increment), 100 kHz Value range: 32 bits, Linear mode or ring mode Interrupts: Target value comparison or range comparison |
|||
Pulse outputs (models with transistor outputs only) |
Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed) 2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction) |
|||
Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%) 2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: 5% at 1 kHz) |
||||
Analog control | 1 (Setting range: 0 to 255) | |||
External analog input | 1 input (Resolution: 1/256, Input range: 0 to 10 V). Not isolated. |
Ordering Information
CPU Unit | Specifications | Model | Standards | |||
---|---|---|---|---|---|---|
Power supply |
Output method | Inputs | Outputs | |||
CP1L-M CPU Units with 40 Points | AC power supply | Relay output | 24 | 16 | CP1L-M40DR-A | UC1, N, L, CE |
DC power supply | CP1L-M40DR-D | |||||
Transistor output (sinking) | CP1L-M40DT-D | |||||
Transistor output (sourcing) | CP1L-M40DT1-D | |||||
CP1L-M CPU Units with 30 Points | AC power supply | Relay output | 18 | 12 | CP1L-M30DR-A | |
DC power supply | CP1L-M30DR-D | |||||
Transistor output (sinking) | CP1L-M30DT-D | |||||
Transistor output (sourcing) | CP1L-M30DT1-D | |||||
CP1L-L CPU Units with 20 Points | AC power supply | Relay output | 12 | 8 | CP1L-L20DR-A | |
DC power supply | CP1L-L20DR-D | |||||
Transistor output (sinking) | CP1L-L20DT-D | |||||
Transistor output (sourcing) | CP1L-L20DT1-D | |||||
CP1L-L CPU Units with 14 Points | AC power supply | Relay output | 8 | 6 | CP1L-L14DR-A | |
DC power supply | CP1L-L14DR-D | |||||
Transistor output (sinking) | CP1L-L14DT-D | |||||
Transistor output (sourcing) | CP1L-L14DT1-D |
Options for CPU Units
Name | Specifications | Model | Standards |
---|---|---|---|
RS-232C Option Board | For CPU Unit option port. | CP1W-CIF01 | UC1, N, L, CE |
RS-422A/485 Option Board | For CPU Unit option port. | CP1W-CIF11 | |
Memory Cassette | Can be used for backing up programs or auto-booting. | CP1W-ME05M |
Programming Devices
Name | Specifications | Model | Standards | |
---|---|---|---|---|
CX-One FA Integrated Tool Package Ver. 2.0 |
CX-One is a package that integrates the Support Software for OMRON PLCs and components. CX-One runs on the following OS. OS:Windows 98SE, Me, NT 4.0 (Service Pack 6a), 2000 (Service Pack 3 or higher), or XP *CX-Thermo runs only on Windows 2000 (Service Pack 3 or higher) or XP. CX-One Ver. 2.0 includes CX-Programmer Ver. 7.@. For details, refer to the CX-One catalog (Cat. No. R134). *The software is provided on CDs for the CXONE-AL@@C-@EV2 and on DVD for the CXONE-AL@@D-@EV2. *Site licenses are available for users who must run the CX-One on many computers. Ask your OMRON representative for details. |
1 license | CXONE-AL01C-EV2 CXONE-AL01D-EV2 | - |
3 license | CXON E-AL03C-EV2 CXON E-AL03 D-EV2 |
|||
10 license | CXONE-AL10C-EV2 CXONE-AL10D-EV2 | |||
50 license | CXON E-AL50C-EV2 CXONE-AL50D-EV2 | |||
USB Programming cable | A-type male to B-type male (Length: 1.8 m) | CP1W-CN221 | - | |
Programming Device Connecting Cable for CP1W-CIF01 RS-232C Option Board |
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | For anti-static connectors |
XW2Z-200S-CV | - |
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-CV | |||
Connects DOS computers, D-Sub 9-pin (Length: 2.0 m) | XW2Z-200S-V | |||
Connects DOS computers, D-Sub 9-pin (Length: 5.0 m) | XW2Z-500S-V | |||
USB-Serial Conversion Cable (See note) |
USB-RS-232C Conversion Cable (Length: 0.5 m) and PC driver (on a CD-ROM disc) are included. Complies with USB Specification 1.1 On personal computer side: USB (A plug connector, male) On PLC side: RS-232C (D-sub 9-pin, male) Driver: Supported by Windows 98, Me, 2000, and XP |
CS1W-CIF31 |
Note:
1. Cannot be used with a peripheral USB port.
2. CP1L PLCs are supported by CX-Programmer version 7.1 or higher.
Name | Output method | Inputs | Outputs | Model | Standards |
---|---|---|---|---|---|
Expansion I/O Units |
Relay | 24 | 16 | CP1W-40EDR | N, L, CE |
Transistor (sinking) | CP1W-40EDT | ||||
Transistor output (sourcing) | CP1W-40EDT1 | ||||
Relay | 12 | 8 | CP1W-20EDR1 | U, C, L, CE | |
Transistor (sinking) | CP1W-20EDT | U, C, N, L, CE | |||
Transistor output (sourcing) | CP1W-20EDT1 | ||||
Relay | — | 16 | CP1W16ER | CE | |
— | 8 | — | CP1W-8ED | U, C, N, L, CE | |
Relay | — | 8 | CP1W-8ER | ||
Transistor (sinking) | - | 8 | CP1W-8ET | ||
Transistor output (sourcing) | CP1W-8ET1 | ||||
Analog Input Unit | Analog (resolution: 1/6000) | 4 | — | CP1W-AD041 | UC1, CE |
Analog Output Unit |
Analog (resolution: 1/6000) | - | 4 | CP1W-DA041 | UC1, CE |
Analog I/O Unit |
Analog (resolution: 1/6000) | 2 | 1 | CP1W-MAD11 | U, C, N, CE |
CompoBus/S I/O Link Unit |
- | 8 (I/O link input bits) |
8 (I/O link input bits) |
CP1WSRT21 | U, C, N, L, CE |
Temperature Sensor Unit |
2 thermocouple inputs | CP1W-TS001 | U, C, N, L, CE | ||
4 thermocouple inputs | CP1W-TS002 | ||||
2 platinum resistance thermometer inputs | CP1W-TS101 | ||||
4 platinum resistance thermometer inputs | CP1W-TS102 |