Vous devez être connecté
-
revenirX
-
Composants
-
-
Category
-
Semi-conducteurs
- La diode
- Les thyristors
- Modules de puissance isolés
- Ponts redresseurs
-
Transistors
- Transistors | GeneSiC
- Modules MOSFET SiC | Mitsubishi
- Modules MOSFET SiC | STARPOWER
- Modules MOSFET SiC ABB
- Modules IGBT | MITSUBISHI
- Modules de transistors | MITSUBISHI
- Modules MOSFET | MITSUBISHI
- Modules de transistors | ABB
- Modules IGBT | POWEREX
- Modules IGBT | INFINEON (EUPEC)
- Composants semiconducteurs en carbure de silicium
- Aller à la sous-catégorie
- Circuits de commande
- Blocs de puissance
- Aller à la sous-catégorie
-
Transducteurs électriques
-
Transducteurs de courant LEM
- Transducteur de courant avec boucle de retour fermée (C/L)
- Transducteur de courant avec boucle de retour ouverte (O/L)
- Transducteur de courant alimenté en tension unipolaire
- Transducteurs en technologie Eta
- Transducteurs de courant de haute précision série LF xx10
- Transducteurs de courant série LH
- HOYS i HOYL – dédié au montage directement sur le jeu de barres
- Transducteurs de courant en technologie SMD série GO-SME et GO-SMS
- Capteurs de courant AUTOMOBILE
- Aller à la sous-catégorie
-
Transducteurs de tension | LEM
- Transducteurs de tension série LV
- Transducteurs de tension série DVL
- Transducteurs de tension de précision à double noyau magnétique CV
- Transducteur de tension de traction DV 4200/SP4
- Transducteurs de tension série DVM
- Transducteurs de tension DVC 1000-P
- Transducteurs de tension - Série DVC 1000
- Aller à la sous-catégorie
- Transducteurs pour la protection, la surveillance et le contrôle | LEM
- Transducteurs à cœur divisé | LEM
- Transducteurs de courant de précision | LEM
- Aller à la sous-catégorie
-
Transducteurs de courant LEM
-
Composants passifs (condensateurs, résistances, fusibles, filtres)
- Résistances
-
Fusibles
- Fusibles miniatures pour c.imp. série ABC et AGC
- Fusible rapides tubulaires
- Cartouches de courbe GL/GG et AM
- Cartouches ultrarapides
- Fusibles à action rapide (norme britannique et américaine)
- Fusibles à action rapide (norme européenne)
- Fusibles de traction
- Cartouche de haute tension
- Aller à la sous-catégorie
-
Condensateurs
- Condensateurs pour moteurs
- Condensateurs électrolitiques
- Condensateurs de type snubbers
- Condensateurs de puissance
- Condensateurs pour circuits continus
- Condensateurs de compensation de puissance
- Condensateurs de haute tension
- Condensateurs pour chauffage par induction
- Condensateurs pour impulsions
- Condensateurs DC LINK
- Condensateurs pour circuits AC/DC
- Aller à la sous-catégorie
- Filtres anti-interférences
- Supercondensateurs
-
Protection contre les surtensions
- Protection contre les surtensions pour les applications coaxiales
- Protection contre les surtensions pour les systèmes de vidéosurveillance
- Parafoudres de ligne électrique
- Protection contre surtensions pour LED
- Parafoudres pour le photovoltaïque
- Protection du système de pesage
- Protection contre les surtensions pour bus de terrain
- Aller à la sous-catégorie
- Aller à la sous-catégorie
-
Relais et contacteurs
- Théorie relais et contacteurs
- Relais statiques triphasés
- Relais statiques CC
- Régulateurs, circuits de commande et accessoires
- Démarrages progressifs et contacteurs inverseurs
- Relais electromécaniques
- Contacteurs
- Commutateurs rotatifs
-
Relais statiques monophasés
- Relais semi-conducteurs AC monophasés, série 1 | D2425 | D2450
- Relais à semi-conducteurs CA monophasés, séries CWA et CWD
- Relais à semi-conducteurs CA monophasés des séries CMRA et CMRD
- Relais à semi-conducteurs CA monophasés, série PS
- Relais semi-conducteurs AC double et quadruple, série D24 D, TD24 Q, H12D48 D
- Relais statiques monophasés, série GN
- Relais à semi-conducteurs CA monophasés, série CKR
- Relais AC monophasés SÉRIES ERDA ET ERAA pour rail DIN
- Relais CA monophasés pour courant 150A
- Relais à semi-conducteurs doubles intégrés à un dissipateur thermique pour un rail DIN
- Aller à la sous-catégorie
- Relais statiques monophasé pour c.imp.
- Relais d'interface
- Aller à la sous-catégorie
- Composants inductifs
- Radiateurs, varistances, protections thermiques
- Ventilateurs
- Climatiseurs et accessoires d'armoires électriques
-
Batteries, chargeurs, blocs d'alimentation tampon et onduleurs
- Batteries et Chargeurs - théorie
- Batteries Li-ion et non-standards. Systèmes de gestion des batteries (BMS)
- Batteries
- Chargeurs de batteries et accessoires
- Alimentation de secours UPS et alimentation tampon
- Convertisseurs de tension et accessoires pour photovoltaïque
- Stockage d'Energie
- Réservoirs de carburant
- Batteries lithium-ion
- Aller à la sous-catégorie
-
Automatique industrielle
- Interrupteurs de fin de course, micro-rupteurs
- Capteurs et convertisseurs
- Pyromètres
- Compteurs, Relais temporisés, Indicateurs de tableau
- Appareils industriels de protection
- Signalisation lumineuse et sonore
- Caméra thermique
- Afficheurs à LED
- Boutons et commutateurs
-
Enregistreurs
- Enregistreur de température à bande et afficheur numérique - AL3000
- Enregistreurs à microprocesseur avec ecran LCD série KR2000
- Enregistreur KR5000
- Indicateur avec fonction enregistrement de température et humidité HN-CH
- Matériaux consommables pour enregistreurs
- Enregistreur graphique compact 71VR1
- Enregistreur KR3000
- Enregistreur PC série R1M
- Enregistreur PC série R2M
- Enregistreur PC, 12 entrés isolées – RZMS
- Enregistreur PC, USB, 12 entrées isolées – RZUS
- Aller à la sous-catégorie
- Pilotes et panneaux
- Aller à la sous-catégorie
-
Câbles et chemins de câbles
- Fils
- Fils de Litz
- Câbles pour les applications spéciales
- Gaines
-
Tresses
- Tresses plates
- Tresses rondes
- Tresses très souples - plates
- Tresses très souples - rondes
- Tresses cuivre cylindriques
- Tresses cuivre cylindriques et protection
- Bandes de mise à la terre souples
- Tresses en acier zingué et inox
- Tresses isolantes en PVC - temp. 85°C
- Tresses plates en aluminium
- Kit de liaison - tresses et gaines
- Aller à la sous-catégorie
- Equipement pour la traction
- Cosses
- Barres flexible isolées
- Barre flexibles multicouches
- Systèmes de traçage des câbles
- Gaines annelées, tuyaux
- Aller à la sous-catégorie
- Voir toutes les catégories
-
Semi-conducteurs
-
-
- Fournisseurs
-
Applications
- Alimentations (UPS) et systèmes de redressement
- Automatisation HVAC
- Chauffage par induction
- Composants pour atmosphères potentiellement explosives (EX)
- Dispositifs de protection industriels
- Équipements pour armoires de distribution, de contrôle et de télécommunications
- Impression
- L'automatisation industrielle
- L'automatisation industrielle
- Machines à souder et machines à souder
- Machines de séchage et de traitement du bois
- Machines pour le thermoformage des plastiques
- Machines-outils CNC
- Mesure et régulation de la température
- Mesure et régulation de la température
- Mines, métallurgie et fondation
- Moteurs et transformateurs
- Traction de tram et de chemin de fer
- Variateurs CA et CC (onduleurs)
-
Installation
-
-
Montaż urządzeń
- Montage d'armoires
- Conception et assemblage d'armoires
- Installation de systèmes électriques
- Appareils d'électronique de puissance
- Machines construites sur commande
- Travaux de recherche et développement R&D
-
Banc de test industriels
- Banc de test de semi-conducteurs de puissance
- Banc de test d'appareils électriques
- Banc de test de varistances et parafoudres
- Banc de test de fusibles d'automobile
- Banc de mesure de charge transitoire Qrr de thyristor et diodes
- Banc de test de rotor d'interruptuer série FD
- Banc de test de disjoncteurs différentiels de courant
- Banc d'étalonnage de relais
- Testeur d'essais visuels de tiges de piston de ressorts à gaz
- Commutateur à thyristor haute intensité
- Testeur de rupture de maille
- Aller à la sous-catégorie
- Voir toutes les catégories
-
-
-
Inducteurs
-
-
Modernizacja induktorów
- Réparation d'inducteurs usagés
- Modernisation des inducteurs
-
Production de nouveaux inducteurs
- Durcissement des vilebrequins
- Durcissement des dents de scie à ruban
- Chauffage des éléments avant collage
- Durcissement des chemins de roulement des roulements de moyeu de roue automobile
- Durcissement des composants de transmission d'entraînement
- Durcissement des arbres étagés
- Chauffage dans les joints de contraction
- Scanning durcissement
- Soudure tendre
- Chauffe-billettes
- Aller à la sous-catégorie
- Base de connaissances
- Voir toutes les catégories
-
-
-
Appareils à induction
-
-
Urządzenia indukcyjne
-
Générateurs pour chauffage par induction
-
Générateurs de chauffage par induction Ambrell
- Générateurs: puissance 500 W, fréquence 150-400 kHz
- Générateurs: puissance 1,2 - 2,4 kW, fréquence 150 - 400 kHz
- Générateurs: puissance 4,2 - 10 kW, fréquence 150 - 400 kHz
- Générateurs: puissance 10-15 kW, fréquence 50-150 kHz
- Générateurs: puissance 30-45 kW, fréquence 50-150 kHz
- Générateurs: puissance 65-135 kW, fréquence 50-150 kHz
- Générateurs: puissance 180-270 kW, fréquence 50-150 kHz
- Générateurs: puissance 20-35-50 kW, fréquence 15-45 kHz
- Générateurs: puissance 75-150 kW, fréquence 15-45 kHz
- Générateurs: puissance 200-500 kW, fréquence 15-45 kHz
- Générateurs: puissance 20-50 kW, fréquence 5-15 kHz
- Aller à la sous-catégorie
- Générateurs de chauffage par induction Denki Kogyo
-
Générateurs de chauffage par induction JKZ
- Générateurs de la série CX, fréquence: 50-120kHz, puissance: 5-25kW
- Générateurs de la série SWS, fréquence: 15-30kHz, puissance: 25-260kW
- Générateurs (fours) pour le formage et le forgeage série MFS (0,5-10 kHz)
- Fours de fusion MFS, fréquence: 0,5-10 kHz, puissance: 70-200kW
- Générateurs série UHT, fréquence: 200-400kHz, puissance: 10-160kW
- Aller à la sous-catégorie
- Générateurs de lampes pour le chauffage par induction
- Générateurs de chauffage par induction Himmelwerk
- Aller à la sous-catégorie
-
Générateurs de chauffage par induction Ambrell
- Réparations et modernisation
- Périphériques
-
Applications
- Applications médicales
- Applications pour l'industrie automobile
- Soudure tendre
- Brasage
- Brasage fort d'aluminium
- Brasage dur d'outils magnétiques en acier inoxydable
- Soudure de précision
- Soudure dans l'atmosphère
- Soudure des bouchons de dissipateurs thermiques en laiton et en acier
- Brasage des carbures frittés
- Souder la pointe de cuivre et le fil
- Aller à la sous-catégorie
- Base de connaissances
- Voir toutes les catégories
-
Générateurs pour chauffage par induction
-
-
-
Service
-
- Contact
- Zobacz wszystkie kategorie
Les photos sont à titre informatif uniquement. Voir les spécifications du produit
please use latin characters
Systèmes d'énergie à hydrogène H2
On the basis of fuel cells, it is possible to build energy storage systems that can become independent from the irregular supply of energy from renewable sources. DACPOL supports its clients throughout the process of acquiring such a system. We help to define needs of the future user and determine the power demand in order to start designing and then executing the installation on this basis. Using fuel cells, a solution is created that is tailored to the customer's requirements, both electrically and mechanically. Hydrogen cells are installed together with the heat exchanger and accompanying elements inside the housing, then properly configured and delivered as a ready product. One of many applications of this type of solutions are applications related to photovoltaic installations.
Fuel cel cooperation with PV installations
When deciding on a photovoltaic installation, there are two options: on-grid and off-grid. The main difference between them is the possibility of integrating the PV system with the general energy grid: an on-grid system allows this, and an off-grid system cannot be connected to the grid and cannot store electricity obtained from photovoltaic sources.
On-grid system
The on-grid system is integrated with the electric network. This means that a user of a photovoltaic installation who obtains electricity from the sun, using it on an ongoing basis, may transfer any surplus energy to the energy company and store it there. This is especially important in the case of an extended period without adequate insolation, when the PV installation cannot operate at full energy profit. Then, the previously produced electricity, which was transferred to the general power grid, can be reused by us. The energy released in this way can be obtained from the power plant in 80%.
Due to the possibility of storing electricity produced by PV modules, on-grid systems are most often used in houses or plants that use the power of PV installations and are connected to the power grid. The advantage of this system is not only the efficiency in producing surplus energy and storing it with the possibility of later collection, but also enabling the sale of surplus energy to the energy company. Unfortunately, in the case of an on-grid photovoltaic system, difficulties must be taken into account during temporary failures of the power grid to which the PV installation is connected. In the event of even short-term problems with the operation of the utility company, the inverter connected to the PV modules automatically disconnects the panels from the photovoltaics. This results in a temporary loss of power to electrical devices.
Off-grid system
The off-grid system allows for the storage of electricity obtained from the photovoltaic installation, but on different principles than in the case of an on-grid system. The off-grid installation is usually not connected to the general grid, so in this case it is not possible to send the surplus electricity back to the utility company. Thanks to this, a system of this type allows the user of PV panels to become completely independent from electricity suppliers and is eagerly chosen in situations when it is about isolated, difficultly located objects or with large power outages.
The off-grid installation works on the same principles as on-grid photovoltaic panels, with the difference, however, that modules not connected to the power grid are additionally equipped with batteries and charging regulators to improve their operation. The advantage of this type of installation is therefore not only independence, but also full freedom in using the electricity stored in the batteries. The disadvantage of off-grid PV modules, however, is both the high price and the inability to sell surplus energy to the external grid.
The most important advantage of hydrogen energy storage is the possibility of its storage in situations where the production of energy from RES is so high that the electricity cannot be fully fed into the grid and consumed. Strong fluctuations in energy production from RES may be caused by natural conditions, such as different wind strength and insolation that changes with the seasons. In practice, there are also problems with the efficiency and capacity of transmission networks. Their expansion often does not keep up with the growing production of electricity from RES. This is especially true in situations where electricity has to travel hundreds of kilometers to travel, for example, from a region with strong winds to a place with high energy demand. In such cases, an energy bank in the form of a system based on hydrogen cells will work.
Envoyez une demande
Êtes-vous intéressé par ce produit? Avez-vous besoin d'informations supplémentaires ou d'une tarification individuelle?
Nous contacter
Ajouter à la liste de souhaits
Vous devez être connecté
On the basis of fuel cells, it is possible to build energy storage systems that can become independent from the irregular supply of energy from renewable sources. DACPOL supports its clients throughout the process of acquiring such a system. We help to define needs of the future user and determine the power demand in order to start designing and then executing the installation on this basis. Using fuel cells, a solution is created that is tailored to the customer's requirements, both electrically and mechanically. Hydrogen cells are installed together with the heat exchanger and accompanying elements inside the housing, then properly configured and delivered as a ready product. One of many applications of this type of solutions are applications related to photovoltaic installations.
Fuel cel cooperation with PV installations
When deciding on a photovoltaic installation, there are two options: on-grid and off-grid. The main difference between them is the possibility of integrating the PV system with the general energy grid: an on-grid system allows this, and an off-grid system cannot be connected to the grid and cannot store electricity obtained from photovoltaic sources.
On-grid system
The on-grid system is integrated with the electric network. This means that a user of a photovoltaic installation who obtains electricity from the sun, using it on an ongoing basis, may transfer any surplus energy to the energy company and store it there. This is especially important in the case of an extended period without adequate insolation, when the PV installation cannot operate at full energy profit. Then, the previously produced electricity, which was transferred to the general power grid, can be reused by us. The energy released in this way can be obtained from the power plant in 80%.
Due to the possibility of storing electricity produced by PV modules, on-grid systems are most often used in houses or plants that use the power of PV installations and are connected to the power grid. The advantage of this system is not only the efficiency in producing surplus energy and storing it with the possibility of later collection, but also enabling the sale of surplus energy to the energy company. Unfortunately, in the case of an on-grid photovoltaic system, difficulties must be taken into account during temporary failures of the power grid to which the PV installation is connected. In the event of even short-term problems with the operation of the utility company, the inverter connected to the PV modules automatically disconnects the panels from the photovoltaics. This results in a temporary loss of power to electrical devices.
Off-grid system
The off-grid system allows for the storage of electricity obtained from the photovoltaic installation, but on different principles than in the case of an on-grid system. The off-grid installation is usually not connected to the general grid, so in this case it is not possible to send the surplus electricity back to the utility company. Thanks to this, a system of this type allows the user of PV panels to become completely independent from electricity suppliers and is eagerly chosen in situations when it is about isolated, difficultly located objects or with large power outages.
The off-grid installation works on the same principles as on-grid photovoltaic panels, with the difference, however, that modules not connected to the power grid are additionally equipped with batteries and charging regulators to improve their operation. The advantage of this type of installation is therefore not only independence, but also full freedom in using the electricity stored in the batteries. The disadvantage of off-grid PV modules, however, is both the high price and the inability to sell surplus energy to the external grid.
The most important advantage of hydrogen energy storage is the possibility of its storage in situations where the production of energy from RES is so high that the electricity cannot be fully fed into the grid and consumed. Strong fluctuations in energy production from RES may be caused by natural conditions, such as different wind strength and insolation that changes with the seasons. In practice, there are also problems with the efficiency and capacity of transmission networks. Their expansion often does not keep up with the growing production of electricity from RES. This is especially true in situations where electricity has to travel hundreds of kilometers to travel, for example, from a region with strong winds to a place with high energy demand. In such cases, an energy bank in the form of a system based on hydrogen cells will work.