Vous devez être connecté
-
revenirX
-
Composants
-
-
Category
-
Semi-conducteurs
- La diode
- Les thyristors
- Modules de puissance isolés
- Ponts redresseurs
-
Transistors
- Transistors | GeneSiC
- Modules MOSFET SiC | Mitsubishi
- Modules MOSFET SiC | STARPOWER
- Modules MOSFET SiC ABB
- Modules IGBT | MITSUBISHI
- Modules de transistors | MITSUBISHI
- Modules MOSFET | MITSUBISHI
- Modules de transistors | ABB
- Modules IGBT | POWEREX
- Modules IGBT | INFINEON (EUPEC)
- Composants semiconducteurs en carbure de silicium
- Aller à la sous-catégorie
- Circuits de commande
- Blocs de puissance
- Aller à la sous-catégorie
-
Transducteurs électriques
-
Transducteurs de courant LEM
- Transducteur de courant avec boucle de retour fermée (C/L)
- Transducteur de courant avec boucle de retour ouverte (O/L)
- Transducteur de courant alimenté en tension unipolaire
- Transducteurs en technologie Eta
- Transducteurs de courant de haute précision série LF xx10
- Transducteurs de courant série LH
- HOYS i HOYL – dédié au montage directement sur le jeu de barres
- Transducteurs de courant en technologie SMD série GO-SME et GO-SMS
- Capteurs de courant AUTOMOBILE
- Aller à la sous-catégorie
-
Transducteurs de tension | LEM
- Transducteurs de tension série LV
- Transducteurs de tension série DVL
- Transducteurs de tension de précision à double noyau magnétique CV
- Transducteur de tension de traction DV 4200/SP4
- Transducteurs de tension série DVM
- Transducteurs de tension DVC 1000-P
- Transducteurs de tension - Série DVC 1000
- Aller à la sous-catégorie
- Transducteurs pour la protection, la surveillance et le contrôle | LEM
- Transducteurs à cœur divisé | LEM
- Transducteurs de courant de précision | LEM
- Aller à la sous-catégorie
-
Transducteurs de courant LEM
-
Composants passifs (condensateurs, résistances, fusibles, filtres)
- Résistances
-
Fusibles
- Fusibles miniatures pour c.imp. série ABC et AGC
- Fusible rapides tubulaires
- Cartouches de courbe GL/GG et AM
- Cartouches ultrarapides
- Fusibles à action rapide (norme britannique et américaine)
- Fusibles à action rapide (norme européenne)
- Fusibles de traction
- Cartouche de haute tension
- Aller à la sous-catégorie
-
Condensateurs
- Condensateurs pour moteurs
- Condensateurs électrolitiques
- Condensateurs de type snubbers
- Condensateurs de puissance
- Condensateurs pour circuits continus
- Condensateurs de compensation de puissance
- Condensateurs de haute tension
- Condensateurs pour chauffage par induction
- Condensateurs pour impulsions
- Condensateurs DC LINK
- Condensateurs pour circuits AC/DC
- Aller à la sous-catégorie
- Filtres anti-interférences
- Supercondensateurs
-
Protection contre les surtensions
- Protection contre les surtensions pour les applications coaxiales
- Protection contre les surtensions pour les systèmes de vidéosurveillance
- Parafoudres de ligne électrique
- Protection contre surtensions pour LED
- Parafoudres pour le photovoltaïque
- Protection du système de pesage
- Protection contre les surtensions pour bus de terrain
- Aller à la sous-catégorie
- Aller à la sous-catégorie
-
Relais et contacteurs
- Théorie relais et contacteurs
- Relais statiques triphasés
- Relais statiques CC
- Régulateurs, circuits de commande et accessoires
- Démarrages progressifs et contacteurs inverseurs
- Relais electromécaniques
- Contacteurs
- Commutateurs rotatifs
-
Relais statiques monophasés
- Relais semi-conducteurs AC monophasés, série 1 | D2425 | D2450
- Relais à semi-conducteurs CA monophasés, séries CWA et CWD
- Relais à semi-conducteurs CA monophasés des séries CMRA et CMRD
- Relais à semi-conducteurs CA monophasés, série PS
- Relais semi-conducteurs AC double et quadruple, série D24 D, TD24 Q, H12D48 D
- Relais statiques monophasés, série GN
- Relais à semi-conducteurs CA monophasés, série CKR
- Relais AC monophasés SÉRIES ERDA ET ERAA pour rail DIN
- Relais CA monophasés pour courant 150A
- Relais à semi-conducteurs doubles intégrés à un dissipateur thermique pour un rail DIN
- Aller à la sous-catégorie
- Relais statiques monophasé pour c.imp.
- Relais d'interface
- Aller à la sous-catégorie
- Composants inductifs
- Radiateurs, varistances, protections thermiques
- Ventilateurs
- Climatiseurs et accessoires d'armoires électriques
-
Batteries, chargeurs, blocs d'alimentation tampon et onduleurs
- Batteries et Chargeurs - théorie
- Batteries Li-ion et non-standards. Systèmes de gestion des batteries (BMS)
- Batteries
- Chargeurs de batteries et accessoires
- Alimentation de secours UPS et alimentation tampon
- Convertisseurs de tension et accessoires pour photovoltaïque
- Stockage d'Energie
- Réservoirs de carburant
- Batteries lithium-ion
- Aller à la sous-catégorie
-
Automatique industrielle
- Interrupteurs de fin de course, micro-rupteurs
- Capteurs et convertisseurs
- Pyromètres
- Compteurs, Relais temporisés, Indicateurs de tableau
- Appareils industriels de protection
- Signalisation lumineuse et sonore
- Caméra thermique
- Afficheurs à LED
- Boutons et commutateurs
-
Enregistreurs
- Enregistreur de température à bande et afficheur numérique - AL3000
- Enregistreurs à microprocesseur avec ecran LCD série KR2000
- Enregistreur KR5000
- Indicateur avec fonction enregistrement de température et humidité HN-CH
- Matériaux consommables pour enregistreurs
- Enregistreur graphique compact 71VR1
- Enregistreur KR3000
- Enregistreur PC série R1M
- Enregistreur PC série R2M
- Enregistreur PC, 12 entrés isolées – RZMS
- Enregistreur PC, USB, 12 entrées isolées – RZUS
- Aller à la sous-catégorie
- Pilotes et panneaux
- Aller à la sous-catégorie
-
Câbles et chemins de câbles
- Fils
- Fils de Litz
- Câbles pour les applications spéciales
- Gaines
-
Tresses
- Tresses plates
- Tresses rondes
- Tresses très souples - plates
- Tresses très souples - rondes
- Tresses cuivre cylindriques
- Tresses cuivre cylindriques et protection
- Bandes de mise à la terre souples
- Tresses en acier zingué et inox
- Tresses isolantes en PVC - temp. 85°C
- Tresses plates en aluminium
- Kit de liaison - tresses et gaines
- Aller à la sous-catégorie
- Equipement pour la traction
- Cosses
- Barres flexible isolées
- Barre flexibles multicouches
- Systèmes de traçage des câbles
- Gaines annelées, tuyaux
- Aller à la sous-catégorie
- Voir toutes les catégories
-
Semi-conducteurs
-
-
- Fournisseurs
-
Applications
- Alimentations (UPS) et systèmes de redressement
- Automatisation HVAC
- Chauffage par induction
- Composants pour atmosphères potentiellement explosives (EX)
- Dispositifs de protection industriels
- Équipements pour armoires de distribution, de contrôle et de télécommunications
- Impression
- L'automatisation industrielle
- L'automatisation industrielle
- Machines à souder et machines à souder
- Machines de séchage et de traitement du bois
- Machines pour le thermoformage des plastiques
- Machines-outils CNC
- Mesure et régulation de la température
- Mesure et régulation de la température
- Mines, métallurgie et fondation
- Moteurs et transformateurs
- Traction de tram et de chemin de fer
- Variateurs CA et CC (onduleurs)
-
Installation
-
-
Montaż urządzeń
- Montage d'armoires
- Conception et assemblage d'armoires
- Installation de systèmes électriques
- Appareils d'électronique de puissance
- Machines construites sur commande
- Travaux de recherche et développement R&D
-
Banc de test industriels
- Banc de test de semi-conducteurs de puissance
- Banc de test d'appareils électriques
- Banc de test de varistances et parafoudres
- Banc de test de fusibles d'automobile
- Banc de mesure de charge transitoire Qrr de thyristor et diodes
- Banc de test de rotor d'interruptuer série FD
- Banc de test de disjoncteurs différentiels de courant
- Banc d'étalonnage de relais
- Testeur d'essais visuels de tiges de piston de ressorts à gaz
- Commutateur à thyristor haute intensité
- Testeur de rupture de maille
- Aller à la sous-catégorie
- Voir toutes les catégories
-
-
-
Inducteurs
-
-
Modernizacja induktorów
- Réparation d'inducteurs usagés
- Modernisation des inducteurs
-
Production de nouveaux inducteurs
- Durcissement des vilebrequins
- Durcissement des dents de scie à ruban
- Chauffage des éléments avant collage
- Durcissement des chemins de roulement des roulements de moyeu de roue automobile
- Durcissement des composants de transmission d'entraînement
- Durcissement des arbres étagés
- Chauffage dans les joints de contraction
- Scanning durcissement
- Soudure tendre
- Chauffe-billettes
- Aller à la sous-catégorie
- Base de connaissances
- Voir toutes les catégories
-
-
-
Appareils à induction
-
-
Urządzenia indukcyjne
-
Générateurs pour chauffage par induction
-
Générateurs de chauffage par induction Ambrell
- Générateurs: puissance 500 W, fréquence 150-400 kHz
- Générateurs: puissance 1,2 - 2,4 kW, fréquence 150 - 400 kHz
- Générateurs: puissance 4,2 - 10 kW, fréquence 150 - 400 kHz
- Générateurs: puissance 10-15 kW, fréquence 50-150 kHz
- Générateurs: puissance 30-45 kW, fréquence 50-150 kHz
- Générateurs: puissance 65-135 kW, fréquence 50-150 kHz
- Générateurs: puissance 180-270 kW, fréquence 50-150 kHz
- Générateurs: puissance 20-35-50 kW, fréquence 15-45 kHz
- Générateurs: puissance 75-150 kW, fréquence 15-45 kHz
- Générateurs: puissance 200-500 kW, fréquence 15-45 kHz
- Générateurs: puissance 20-50 kW, fréquence 5-15 kHz
- Aller à la sous-catégorie
- Générateurs de chauffage par induction Denki Kogyo
-
Générateurs de chauffage par induction JKZ
- Générateurs de la série CX, fréquence: 50-120kHz, puissance: 5-25kW
- Générateurs de la série SWS, fréquence: 15-30kHz, puissance: 25-260kW
- Générateurs (fours) pour le formage et le forgeage série MFS (0,5-10 kHz)
- Fours de fusion MFS, fréquence: 0,5-10 kHz, puissance: 70-200kW
- Générateurs série UHT, fréquence: 200-400kHz, puissance: 10-160kW
- Aller à la sous-catégorie
- Générateurs de lampes pour le chauffage par induction
- Générateurs de chauffage par induction Himmelwerk
- Aller à la sous-catégorie
-
Générateurs de chauffage par induction Ambrell
- Réparations et modernisation
- Périphériques
-
Applications
- Applications médicales
- Applications pour l'industrie automobile
- Soudure tendre
- Brasage
- Brasage fort d'aluminium
- Brasage dur d'outils magnétiques en acier inoxydable
- Soudure de précision
- Soudure dans l'atmosphère
- Soudure des bouchons de dissipateurs thermiques en laiton et en acier
- Brasage des carbures frittés
- Souder la pointe de cuivre et le fil
- Aller à la sous-catégorie
- Base de connaissances
- Voir toutes les catégories
-
Générateurs pour chauffage par induction
-
-
-
Service
-
- Contact
- Zobacz wszystkie kategorie
Les photos sont à titre informatif uniquement. Voir les spécifications du produit
please use latin characters
14.2 Thermally Conductive Materials UNIVERSAL SCIENCE
-
Thermal conductivity: 1.5 W / mK
-
produced dielectric barrier at the intersection
-
requires fixing with springs, metal clips or clamps
-
provides electrical insulation
-
The formula allows the reduction of air gaps on the surface
-
guaranteed temperature stability over a wide temperature range
-
any heat-generating surfaces that require thermal performance and electrical insulation
-
connections of power supplies with a heat sink
-
thermal connections of TO220 and T0241 devices with a heat sink
Availability:
- thickness: 0.23 mm
- sheet size 300x300 mm
- available in rolls of specified length
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test method | T-Pad 1500 | Feature (unit) | Test method | T-Pad 1500 |
Colour | Visual | yellow | Tensile strength (N/mm) | ASTM D412 | 20 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.5 | Percentage extension (%) | ASTM D412 | 10 |
Hardness | ASTM D2240 | 70 | Breakdown voltage (V) | ASTM D149 | >6000 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 2.9 | Resistivity | ASTM D257 | 2.0 x 1023t |
Temperature range (°C) | - | od -40°C do +200°C | |||
Fire Resistance | UL94 | V-0 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
Thermal conductivity: 6.0 W / mK
-
high electrical strength and thermal efficiency
-
unique structure allowing to reduce thermal resistance
-
provides electrical insulation
-
increased thermal efficiency
-
guaranteed temperature stability over a wide temperature range
-
any heat-generating electronic devices
-
connections of power supplies with a heat sink
-
thermal connections of TO220 and TO247 devices with a heat sink
-
available washers with standard thicknesses: 0.25, 0.50 and 0.75mm
-
sheet size 356x406mm
-
the offer also includes cutting out non-standard sheets
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | T-Pad 6000 | Feature (unit) | Test Method | T-Pad 6000 |
Colour | Visual | white | Breakdown voltage (V) | ASTM D149 | >6000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.0 | Dielectric constant (dla 1MHz) | ASTM D150 | 3.2 |
Hardness | ASTM D2240 | 85 | resistivity(Ω cm) | ASTM D257 | 5 x 1012 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 1.10 | Degasification CVCM (%) | ASTM E595 | 0.04 |
Temperature range (°C) | - | od -55°C do +195°C | Density (g/cm3) | - | 1.50 |
Fire Resistance | UL94 | V-0 |
- Thermal conductivity: 6.5 W / mK
- high electrical strength and thermal efficiency
- unique structure allowing to reduce thermal resistance
- any heat-generating electronic devices
- connections of power supplies with a heat sink
- thermal connections of TO220 and TO247 devices with a heat sink
Availability:
- standard thickness 0.2mm
- sheet size 356x406mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | T-Pad 6500 | Feature (unit) | Test Method | T-Pad 6500 |
Colour | Visual | light blue | Breakdown voltage (V) | ASTM D149 | >4000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.5 | Dielectric constant (dla 1MHz) | ASTM D150 | 3.1 |
Hardness | ASTM D2240 | 75 | resistivity (Ω cm) | ASTM D257 | 2 x 1011 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 0.95 | degassing CVCM (%) | ASTM E595 | 0.04 |
Temperature range (°C) | - | od -40°C do +125°C | Density (g/cm3) | - | 1.46 |
Fire Resistance | UL94 | V-0 |
Uwaga:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
thermal conductivity: 1.0 W / mK
-
good thermal performance guaranteed in the temperature range from -50oC to + 160oC
-
flexibility and ease of application
-
electrically insulated
-
flexible and adherent structure makes it ideal for uneven or rough surfaces
-
self-adhesive
-
cases where low costs and low thermal properties are required
-
systems requiring a wide temperature range
-
elements with an uneven surface
Availability:
- thickness from 0.5mm to 5mm
- standard sheet sizes: 229x229mm or 457x457mm
- the 0.5mm thick variant is reinforced with fiberglass
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 1000 | Feature (unit) | Test Method | UniGap 1000 |
Colour | Visual | Gray | Tensile strength (N/mm) | ASTM D412 | 50 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.0 | Percentage extension (%) | ASTM D412 | 61 |
Hardness | ASTM D2240 | 45 | Breakdown voltage (V) | ASTM D149 | >27000 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 16.10 | resistivity (Ω cm) | ASTM D257 | 4 x 1023 |
Temperature range (°C) | - | od -40°C do +150°C | degassing CVCM (%) | ASTM E595 | 0.09 |
Fire Resistance | UL94 | V-0 | Dielectric constant (dla 1MHz) | ASTM D257 | 5.60 |
-
thermal conductivity: 1.7 W / mK
-
flexible and adherent structure makes it ideal for uneven and rough surfaces
-
self-adhesive
-
electrically insulated
-
made of extremely soft and flexible plastic, thanks to which it protects electronic components against damage or deformation
-
reduces surface thermal resistance to a minimum
-
easy to apply
-
pressure sensitive electronic components
-
cooling devices in rectifiers and inverters
-
DSP signal processors
Availability:
- thickness from 0.5mm to 6mm
- standard sheet sizes: 609x609mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 1700 | Feature (unit) | Test Method | UniGap 1700 |
Colour | Visual | różowy | Percentage extension(%) | ASTM D412 | 85 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.7 | Breakdown voltage (V) | ASTM D149 | >5000 |
Hardness | ASTM D2240 | 30 | degassing CVCM (%) | ASTM D595 | 0.08 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 1.90 | Dielectric constant (For 1MHz) | ASTM D257 | 5.0 |
Temperature range (°C) | - | od -50°C do +200°C | |||
Fire Resistance | UL94 | V-0 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
soft and adhesive gap filler with unique thermal properties
-
thermal conductivity 3.0W / mK
-
easier application due to the use of a polymer coating
-
exerts little pressure on an electronic device
-
high thermal conductivity
-
electrical insulation
-
self-adhesive
Recommended for:
-
elements with an uneven surface
-
memory cards, VGA modules, LED packages and many more
Availability:
-
thickness from 0.5mm to 5mm
-
standard sheet sizes: 229x229mm for thickness above 1mm or 457x457mm for thickness 0.5mm or 1mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 3000 | Feature (unit) | Test Method | UniGap 3000 |
Colour | Visual | niebieski | Tensile strength (N/mm) | ASTM D412 | 47 |
Thermal conductivity (W/mK) | ASTM D5470 | 3.0 | Percentage extension (%) | ASTM D412 | 98 |
Hardness | ASTM D2240 | 40 | Breakdown voltage (V) | ASTM D149 | >10000 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 4.96 | resistivity (Ω cm) | ASTM D257 | 9.5 x 1012 |
Temperature range (°C) | - | od -50°C do +200°C | degassing CVCM (%) | ASTM E595 | 0.04 |
Fire Resistance | UL94 | V-0 | Dielectric constant (For 1MHz) | ASTM D257 | 13.60 |
Density (g/m3) | - | 3 |
-
thermal conductivity: 6.0 W / mK
-
ceramic gap filling pad
-
adhesive surface reducing thermal resistance
-
electrical insulation (ensured by high dielectric strength)
-
high thermal conductivity allows the removal of a large amount of heat
-
despite its high thermal conductivity, it still retains its softness
-
fills air gaps, thanks to which it increases thermal efficiency
- Recommended for:
-
damaged or uneven surfaces
-
electronic components used in the aviation, military and medical industries
-
unipolar transistors and other power elements as additional cooling
Availability:-
thickness from 0.5mm to 5mm
-
standard sheet size 229x229mm
-
Can be made with fiberglass reinforcement
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 6000 | Feature (unit) | Test Method | UniGap 6000 |
Colour | Visual | jasnoszary | Breakdown voltage (V) | ASTM D412 | >5000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.0 | Percentage extension (%) | ASTM D412 | 20 |
Hardness | ASTM D2240 | 70 | Breakdown voltage (V) | ASTM D149 | 6 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 3.3 | degassing CVCM (%) | ASTM E595 | 0.05 |
Temperature range (°C) | - | od -45°C do +190°C | Dielectric constant (w 1MHz) | ASTM D257 | 3.3 |
Fire Resistance | UL94 | HB | Density (g/m3) | - | 1.4 |
Uwaga:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
graphite, thermally conductive surface material
-
excellent alternative to thermal grease
-
maintains a constant level of thermal conductivity
-
great solution for elements that do not require electrical insulation
-
ease of application and aesthetics
-
thermal connection of PCB, LED etc. to the heat sink
-
automation, power supplies, motors and all other cases where low costs are expected
- standard thicknesses: 0.125mm, 0.25mm, 0.5m
- sheet size 610x457mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 6000 | Feature (unit) | Test Method | UniGap 6000 |
Colour | Visual | light gray | Breakdown voltage (V) | ASTM D412 | >5000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.0 | Percentage extension (%) | ASTM D412 | 20 |
Hardness | ASTM D2240 | 70 | Breakdown voltage (V) | ASTM D149 | 6 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 3.3 | degassing CVCM (%) | ASTM E595 | 0.05 |
Temperature range (°C) | - | od -45°C do +190°C | Dielectric constant (w 1MHz) | ASTM D257 | 3.3 |
Fire Resistance | UL94 | HB | Density (g/m3) | - | 1.4 |
Properties:
-
made in the form of a dry material covering the aluminum base
-
beneath the surface of the material is a thixotropic paste-like material is a good thermal connector between damaged surfaces
-
prevents the formation of air gaps
-
reduces thermal impedance
-
increases thermal performance
-
connecting electrically insulated heat emitting devices to a heat sink
-
power supplies and power modules
Availability:
- aluminum stands are made to measure, the covering material is available in rolls or sheets
- variants available in different thicknesses
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPhase 2000 | Feature (unit) | Test Method | UniPhase 2000 |
Thickness (mm) | - | 0.075 | Phase change temperatures (oC) | - | 60 |
Max. Operating temperature (oC) | doświadczalna | +150 | Volume increase with phase change (%) | doświadczalna | 15% |
Thermal impedance in 20psi(oC-cm2/W) | ASTM D5470 | 0.2 | |||
Thermal impedance in 100psi(oC-cm2/W) | ASTM D5470 | 0.13 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
consists of a layer of thermally conductive material and a KaptonTM MT pad
-
provides high dielectric strength and resistance to mechanical damage
-
also works well with damaged or damaged surfaces
-
permanent and efficient thermal connection
-
reduction of thermal impedance, due to filling air gaps
-
application in the form of a thin strip significantly increases thermal conductivity
-
thermal connection of heat-generating electrical devices with a heat sink
-
systems where the thermal grease cannot be used
-
power supplies and power modules
Availability:
-
surface materials available in rolls or sheets, aluminum washers are made to order
-
option of thickness selection
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPhase 2500 | Feature (unit) | Test Method | UniPhase 2500 |
Thickness (mm) | - | 0.50 | Tensile strength during phase change (kPa) | ASTM D412 | 1.26x105 |
Max. Operating temperature (oC) | Experimental | +150 | Volume increase with phase change (%) | doświadczalna | 15 |
Thermal impedance in 20psi(oC-cm2/W) | ASTM D5470 | 0.45 | resistivity (Ω∙cm) | ASTM D257 | 1014 |
Thermal conductivity (W/mK) | ASTM D5470 | 0.75 | Dielectric strength | ASTM D149 | ≤5000 |
Phase change temperatures (oC) | - | 60 | Dielectric constant | ASTM D150 | 4.0 |
-
low thermal resistance
-
excellent operation in cooperation with even the most demanding surfaces
-
applied to the LED COB module, increases its service life
-
provides excellent thermal connection
-
prevents the formation of air gaps on the surface
-
LED COB modules
-
thermal connections of heat-emitting electrical devices with a heat sink
-
power supplies and power modules
Availability:
- aluminum stands are made to measure, the covering material is available in rolls or sheets
- variants available in different thicknesses
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPhase 4000 | Feature (unit) | Test Method | UniPhase 4000 |
Thickness (mm) | - | light gray | resistivity (Ω∙cm) | ASTM D257 | 3 x 1012 |
Max. Operating temperature (oC) | Experimental | 6.0 | Density (g/m3) | ASTM D149 | 2.87 |
Thermal impedance in 20psi(oC-cm2/W) | ASTM D5470 | 70 | |||
Thermal conductivity (W/mK) | ASTM D5470 | 3.3 |
Uwaga:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
- paste adapted to delicate silicone componentsprzewodność cieplna 1.7W/mK
-
strongly adhesive
-
maintains its thermal capabilities at temperatures up to 180oC
-
high thermal conductivity
-
after application, the agent remains flexible, thanks to which it is resistant to shocks and pressure
Recommended for:
-
automotive industry and telecommunications
-
used in power supplies and LED systems
Availability:
-
available in tubes or containers for easy application
-
allows easy dosing
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPutty 1700NS | Feature (unit) | Test Method | UniPutty 1700NS |
Colour | Visual | Gray | Dielectric strength (V/0.025mm) | ASTM D149 | 310 |
Temperature range (oC) | - | -40oC do 180oC | Dissipation factor 25oC for 1000Hz | ASTM D150 | 0.0025 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.7 | resistivity (Ω∙cm) | ASTM D257 | 2x1015 |
Volatile compounds at 200oC for 24 hours (%/Wt) | FTM-321 | 0 | Dielectric constant 25oC at 1000Hz | ASTM D150 | 5.0 |
Evaporation at 200oC for 24 hours (%/Wt) | FTM-321 | 0 | |||
Density in 25OC | ASTMD70 | 2.6 |
-
thermal conductivity 1.8W / mK
-
soft silicone paste with high adhesion
-
easy to apply
-
soft and tight, so it doesn't put pressure on the device
-
unique formula, provides excellent thermally conductive properties
-
Recommended for high power electronic components
-
LED systems and telecommunications devices
Availability:
-
available in tubes or containers for easy application
-
other types of packaging are available on customer's request
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPutty 1800 | Feature (unit) | Test Method | UniPutty 1800 |
Colour | Visual | szary | Dielectric strength (V/0.025mm) | ASTM D149 | 500 |
Max. Operating temperature (oC) | - | -40oC do 200oC | Viscosity (mPas) | Brookfielda | od 4 mln do 8 mln |
Thermal conductivity (W/mK) | ASTM D5470 | 1.8 | resistivity (Ω∙cm) | ASTM D2240 | 1014 |
Thermal resistance (oC/W) | ASTM D5470 | 1.7 | Density (g/m3) | - | 2.6 |
degassing CVCM (%) | ASTM E595 | 0.08 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
silicone thermal grease with thixotropic properties
-
thermal conductivity 2W / mK
-
can be applied in room conditions, but also heated to speed up the process.
-
sticky and thixotropic
-
shock and pressure resistant
-
high thermal conductivity
-
power devices in converters and power supplies
-
DSP signal processors
Availability:
- available in tubes or containers for easy application
- also available in collective containers
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPutty 2000 | Feature (unit) | Test Method | UniGap 3000 |
Colour | Visual | slate | resistivity (Ω∙cm) | ASTM D2240 | 9.15 x 1012 |
Thermal conductivity (W/mK) | ASTM D5470 | 2.0 | Hardness | ASTM D2240 | 60 |
Viscosity | Brookfielda | 110 000 ÷140 000 | Fire Resistance | UL94 | V-0 |
Temperature range (oC) | - | -65oC do +200oC |
-
the basis is a thin metal foil that accelerates heat transfer between surfaces
-
no air gaps
-
non-electrically isolated connection
-
enables a simple and quick connection to a heat sink
-
high thermal conductivity
-
connecting power supplies or transducers to the heat sink
-
joining any metal surfaces
Availability:
-
standard thickness 0.16mm
-
roll length 33m
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | Bondline 200 | Feature (unit) | Test Method | Bondline 200 |
Colour | - | light gray | Inflammability | UL94 | HB |
Thermal conductivity (W/mK) | ASTM D5470 | 0.30 | Peel strength (N/mm) | ASTM 412 | >54 |
Thermal resistance (oC-cm2/W) | ASTM D2240 | 0.56 | Tensile strength (N/mm) | ASTM 412 | >370 |
Working temperature (oC) | doświadczalna | -20 do +150 | Elongation (%) | ASTM 412 | 8 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
self-adhesive double-sided tape with high thermal conductivity properties
-
provides electrical insulation
-
prevents the formation of air gaps, reducing thermal resistance
-
high dielectric strength
-
very thin (0.12mm) thanks to which it shows excellent thermal properties
-
connecting PCBs with a heat sink
-
power supplies and transducers
Availability:
-
strip thickness 0.12mm
-
roll length 30m, various widths available
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | Bondline 300 | Feature (unit) | Test Method | Bondline 300 |
Clour | - | jasnobrązowy | Inflammability | UL94 | HB |
Thermal conductivity (W/mK) | ASTM D5470 | 0.40 | Adhesion to steel (N/cm) | ASTM 412 | 3.25 |
Thermal resistance (oC-cm2/W) | ASTM D5470 | 0.10 | Breakdown voltage (VAC) | ASTM D149 | >6000 |
Operating temperature (oC) | Experimental | -20 do +150 |
-
thermally conductive tape, electrically insulated
-
allows for efficient heat flow between elements
-
fills air gaps, thus reducing thermal resistance
-
provides excellent adhesion for a wide range of materials
-
permanent connection of elements
-
high dielectric strength
-
simple application
-
connecting LED modules with a heat sink
-
connecting medium power components with a heat sink
-
standard thicknesses 0.15mm, 0.25mm, 0.5mm
-
roll length 30m and 50m
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | Bondline 700 | Feature (unit) | Test Method | Bondline 700 |
Colour | - | white | Inflammability | UL94 | V2 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.1 | Breakdown voltage (V) | ASTM D149 | >6000 |
Thermal resistance (oC-cm2/W) | ASTM D5470 | 3 | Tensile strength(kg/cm) | ASTM 412 | 0.15 |
Operating temperature (oC) | Experimental | -25 do +130 | Elongation (%) | ASTM 412 | 400 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
provides an electrically insulated connection
-
prevents the formation of air gaps
-
offers a quick and easy connection of LED lighting with a heat sink
-
high thermal conductivity
-
joining metal surfaces
-
attaching the heat sink to the LED lighting
-
attaching the heat sink to the power supply or transducer
-
standard thickness 0.2mm
-
possibility of ordering rolls of custom sizes
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test method | Bondline 1800 | Feature (unit) | Test Method | Bondline 1800 |
Colour | - | white | Breakdown voltage (V) | ASTM D149 | >4000 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.80 | Maximum storage length | - | 12 months |
Thermal resistance (oC-cm2/W) | ASTM D5470 | 0.38 | |||
Operating temperature (oC) | Experimental | -20 do +120 |
- silicone based thermal adhesive
- thermal conductivity 2.0W / mK
- provides a strong and durable connection
- excellent thermally conductive and dielectric properties
- suitable even for delicate electronic components
- the curing speed depends on the temperature and the amount used
- small drops (1mm-2mm) can be applied with a gun, smaller gaps require the use of specialized equipment
- supplied as standard in containers or buckets
- can be stored for 12 months at a temperature below 5oC
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | BondPutty 2000 | Feature (unit) | Test Method | BondPutty 2000 |
Colour | - | Gray | Dielectric strength (V/mm) | ASTM D149 | >18000 |
Temperatura pracy (oC) | - | -45o do +210 | resistivity (Ω∙cm) | ASTM D257 | 3.4 x 1013 |
Thermal conductivity (W/mK) | ASTM D5470 | 2.0 | Percentage extension (%) | ASTM 412 | 103 |
Hardness | ASTM D2240-95 | 50 | Tensile strength (MPa) | ASTM 412 | 2.1 |
Viscosity (mPas) | Brookfielda | 140000 |
can be stored for 12 months at a temperature below 5oC
Envoyez une demande
Êtes-vous intéressé par ce produit? Avez-vous besoin d'informations supplémentaires ou d'une tarification individuelle?
Nous contacter
Ajouter à la liste de souhaits
Vous devez être connecté
14.2 Thermally Conductive Materials UNIVERSAL SCIENCE
-
Thermal conductivity: 1.5 W / mK
-
produced dielectric barrier at the intersection
-
requires fixing with springs, metal clips or clamps
-
provides electrical insulation
-
The formula allows the reduction of air gaps on the surface
-
guaranteed temperature stability over a wide temperature range
-
any heat-generating surfaces that require thermal performance and electrical insulation
-
connections of power supplies with a heat sink
-
thermal connections of TO220 and T0241 devices with a heat sink
Availability:
- thickness: 0.23 mm
- sheet size 300x300 mm
- available in rolls of specified length
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test method | T-Pad 1500 | Feature (unit) | Test method | T-Pad 1500 |
Colour | Visual | yellow | Tensile strength (N/mm) | ASTM D412 | 20 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.5 | Percentage extension (%) | ASTM D412 | 10 |
Hardness | ASTM D2240 | 70 | Breakdown voltage (V) | ASTM D149 | >6000 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 2.9 | Resistivity | ASTM D257 | 2.0 x 1023t |
Temperature range (°C) | - | od -40°C do +200°C | |||
Fire Resistance | UL94 | V-0 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
Thermal conductivity: 6.0 W / mK
-
high electrical strength and thermal efficiency
-
unique structure allowing to reduce thermal resistance
-
provides electrical insulation
-
increased thermal efficiency
-
guaranteed temperature stability over a wide temperature range
-
any heat-generating electronic devices
-
connections of power supplies with a heat sink
-
thermal connections of TO220 and TO247 devices with a heat sink
-
available washers with standard thicknesses: 0.25, 0.50 and 0.75mm
-
sheet size 356x406mm
-
the offer also includes cutting out non-standard sheets
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | T-Pad 6000 | Feature (unit) | Test Method | T-Pad 6000 |
Colour | Visual | white | Breakdown voltage (V) | ASTM D149 | >6000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.0 | Dielectric constant (dla 1MHz) | ASTM D150 | 3.2 |
Hardness | ASTM D2240 | 85 | resistivity(Ω cm) | ASTM D257 | 5 x 1012 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 1.10 | Degasification CVCM (%) | ASTM E595 | 0.04 |
Temperature range (°C) | - | od -55°C do +195°C | Density (g/cm3) | - | 1.50 |
Fire Resistance | UL94 | V-0 |
- Thermal conductivity: 6.5 W / mK
- high electrical strength and thermal efficiency
- unique structure allowing to reduce thermal resistance
- any heat-generating electronic devices
- connections of power supplies with a heat sink
- thermal connections of TO220 and TO247 devices with a heat sink
Availability:
- standard thickness 0.2mm
- sheet size 356x406mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | T-Pad 6500 | Feature (unit) | Test Method | T-Pad 6500 |
Colour | Visual | light blue | Breakdown voltage (V) | ASTM D149 | >4000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.5 | Dielectric constant (dla 1MHz) | ASTM D150 | 3.1 |
Hardness | ASTM D2240 | 75 | resistivity (Ω cm) | ASTM D257 | 2 x 1011 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 0.95 | degassing CVCM (%) | ASTM E595 | 0.04 |
Temperature range (°C) | - | od -40°C do +125°C | Density (g/cm3) | - | 1.46 |
Fire Resistance | UL94 | V-0 |
Uwaga:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
thermal conductivity: 1.0 W / mK
-
good thermal performance guaranteed in the temperature range from -50oC to + 160oC
-
flexibility and ease of application
-
electrically insulated
-
flexible and adherent structure makes it ideal for uneven or rough surfaces
-
self-adhesive
-
cases where low costs and low thermal properties are required
-
systems requiring a wide temperature range
-
elements with an uneven surface
Availability:
- thickness from 0.5mm to 5mm
- standard sheet sizes: 229x229mm or 457x457mm
- the 0.5mm thick variant is reinforced with fiberglass
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 1000 | Feature (unit) | Test Method | UniGap 1000 |
Colour | Visual | Gray | Tensile strength (N/mm) | ASTM D412 | 50 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.0 | Percentage extension (%) | ASTM D412 | 61 |
Hardness | ASTM D2240 | 45 | Breakdown voltage (V) | ASTM D149 | >27000 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 16.10 | resistivity (Ω cm) | ASTM D257 | 4 x 1023 |
Temperature range (°C) | - | od -40°C do +150°C | degassing CVCM (%) | ASTM E595 | 0.09 |
Fire Resistance | UL94 | V-0 | Dielectric constant (dla 1MHz) | ASTM D257 | 5.60 |
-
thermal conductivity: 1.7 W / mK
-
flexible and adherent structure makes it ideal for uneven and rough surfaces
-
self-adhesive
-
electrically insulated
-
made of extremely soft and flexible plastic, thanks to which it protects electronic components against damage or deformation
-
reduces surface thermal resistance to a minimum
-
easy to apply
-
pressure sensitive electronic components
-
cooling devices in rectifiers and inverters
-
DSP signal processors
Availability:
- thickness from 0.5mm to 6mm
- standard sheet sizes: 609x609mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 1700 | Feature (unit) | Test Method | UniGap 1700 |
Colour | Visual | różowy | Percentage extension(%) | ASTM D412 | 85 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.7 | Breakdown voltage (V) | ASTM D149 | >5000 |
Hardness | ASTM D2240 | 30 | degassing CVCM (%) | ASTM D595 | 0.08 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 1.90 | Dielectric constant (For 1MHz) | ASTM D257 | 5.0 |
Temperature range (°C) | - | od -50°C do +200°C | |||
Fire Resistance | UL94 | V-0 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
soft and adhesive gap filler with unique thermal properties
-
thermal conductivity 3.0W / mK
-
easier application due to the use of a polymer coating
-
exerts little pressure on an electronic device
-
high thermal conductivity
-
electrical insulation
-
self-adhesive
Recommended for:
-
elements with an uneven surface
-
memory cards, VGA modules, LED packages and many more
Availability:
-
thickness from 0.5mm to 5mm
-
standard sheet sizes: 229x229mm for thickness above 1mm or 457x457mm for thickness 0.5mm or 1mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 3000 | Feature (unit) | Test Method | UniGap 3000 |
Colour | Visual | niebieski | Tensile strength (N/mm) | ASTM D412 | 47 |
Thermal conductivity (W/mK) | ASTM D5470 | 3.0 | Percentage extension (%) | ASTM D412 | 98 |
Hardness | ASTM D2240 | 40 | Breakdown voltage (V) | ASTM D149 | >10000 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 4.96 | resistivity (Ω cm) | ASTM D257 | 9.5 x 1012 |
Temperature range (°C) | - | od -50°C do +200°C | degassing CVCM (%) | ASTM E595 | 0.04 |
Fire Resistance | UL94 | V-0 | Dielectric constant (For 1MHz) | ASTM D257 | 13.60 |
Density (g/m3) | - | 3 |
-
thermal conductivity: 6.0 W / mK
-
ceramic gap filling pad
-
adhesive surface reducing thermal resistance
-
electrical insulation (ensured by high dielectric strength)
-
high thermal conductivity allows the removal of a large amount of heat
-
despite its high thermal conductivity, it still retains its softness
-
fills air gaps, thanks to which it increases thermal efficiency
- Recommended for:
-
damaged or uneven surfaces
-
electronic components used in the aviation, military and medical industries
-
unipolar transistors and other power elements as additional cooling
Availability:-
thickness from 0.5mm to 5mm
-
standard sheet size 229x229mm
-
Can be made with fiberglass reinforcement
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 6000 | Feature (unit) | Test Method | UniGap 6000 |
Colour | Visual | jasnoszary | Breakdown voltage (V) | ASTM D412 | >5000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.0 | Percentage extension (%) | ASTM D412 | 20 |
Hardness | ASTM D2240 | 70 | Breakdown voltage (V) | ASTM D149 | 6 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 3.3 | degassing CVCM (%) | ASTM E595 | 0.05 |
Temperature range (°C) | - | od -45°C do +190°C | Dielectric constant (w 1MHz) | ASTM D257 | 3.3 |
Fire Resistance | UL94 | HB | Density (g/m3) | - | 1.4 |
Uwaga:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
graphite, thermally conductive surface material
-
excellent alternative to thermal grease
-
maintains a constant level of thermal conductivity
-
great solution for elements that do not require electrical insulation
-
ease of application and aesthetics
-
thermal connection of PCB, LED etc. to the heat sink
-
automation, power supplies, motors and all other cases where low costs are expected
- standard thicknesses: 0.125mm, 0.25mm, 0.5m
- sheet size 610x457mm
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniGap 6000 | Feature (unit) | Test Method | UniGap 6000 |
Colour | Visual | light gray | Breakdown voltage (V) | ASTM D412 | >5000 |
Thermal conductivity (W/mK) | ASTM D5470 | 6.0 | Percentage extension (%) | ASTM D412 | 20 |
Hardness | ASTM D2240 | 70 | Breakdown voltage (V) | ASTM D149 | 6 |
Thermal impedance (K-cm2/W w 69KPa) | ASTM D5470 | 3.3 | degassing CVCM (%) | ASTM E595 | 0.05 |
Temperature range (°C) | - | od -45°C do +190°C | Dielectric constant (w 1MHz) | ASTM D257 | 3.3 |
Fire Resistance | UL94 | HB | Density (g/m3) | - | 1.4 |
Properties:
-
made in the form of a dry material covering the aluminum base
-
beneath the surface of the material is a thixotropic paste-like material is a good thermal connector between damaged surfaces
-
prevents the formation of air gaps
-
reduces thermal impedance
-
increases thermal performance
-
connecting electrically insulated heat emitting devices to a heat sink
-
power supplies and power modules
Availability:
- aluminum stands are made to measure, the covering material is available in rolls or sheets
- variants available in different thicknesses
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPhase 2000 | Feature (unit) | Test Method | UniPhase 2000 |
Thickness (mm) | - | 0.075 | Phase change temperatures (oC) | - | 60 |
Max. Operating temperature (oC) | doświadczalna | +150 | Volume increase with phase change (%) | doświadczalna | 15% |
Thermal impedance in 20psi(oC-cm2/W) | ASTM D5470 | 0.2 | |||
Thermal impedance in 100psi(oC-cm2/W) | ASTM D5470 | 0.13 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
consists of a layer of thermally conductive material and a KaptonTM MT pad
-
provides high dielectric strength and resistance to mechanical damage
-
also works well with damaged or damaged surfaces
-
permanent and efficient thermal connection
-
reduction of thermal impedance, due to filling air gaps
-
application in the form of a thin strip significantly increases thermal conductivity
-
thermal connection of heat-generating electrical devices with a heat sink
-
systems where the thermal grease cannot be used
-
power supplies and power modules
Availability:
-
surface materials available in rolls or sheets, aluminum washers are made to order
-
option of thickness selection
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPhase 2500 | Feature (unit) | Test Method | UniPhase 2500 |
Thickness (mm) | - | 0.50 | Tensile strength during phase change (kPa) | ASTM D412 | 1.26x105 |
Max. Operating temperature (oC) | Experimental | +150 | Volume increase with phase change (%) | doświadczalna | 15 |
Thermal impedance in 20psi(oC-cm2/W) | ASTM D5470 | 0.45 | resistivity (Ω∙cm) | ASTM D257 | 1014 |
Thermal conductivity (W/mK) | ASTM D5470 | 0.75 | Dielectric strength | ASTM D149 | ≤5000 |
Phase change temperatures (oC) | - | 60 | Dielectric constant | ASTM D150 | 4.0 |
-
low thermal resistance
-
excellent operation in cooperation with even the most demanding surfaces
-
applied to the LED COB module, increases its service life
-
provides excellent thermal connection
-
prevents the formation of air gaps on the surface
-
LED COB modules
-
thermal connections of heat-emitting electrical devices with a heat sink
-
power supplies and power modules
Availability:
- aluminum stands are made to measure, the covering material is available in rolls or sheets
- variants available in different thicknesses
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPhase 4000 | Feature (unit) | Test Method | UniPhase 4000 |
Thickness (mm) | - | light gray | resistivity (Ω∙cm) | ASTM D257 | 3 x 1012 |
Max. Operating temperature (oC) | Experimental | 6.0 | Density (g/m3) | ASTM D149 | 2.87 |
Thermal impedance in 20psi(oC-cm2/W) | ASTM D5470 | 70 | |||
Thermal conductivity (W/mK) | ASTM D5470 | 3.3 |
Uwaga:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
- paste adapted to delicate silicone componentsprzewodność cieplna 1.7W/mK
-
strongly adhesive
-
maintains its thermal capabilities at temperatures up to 180oC
-
high thermal conductivity
-
after application, the agent remains flexible, thanks to which it is resistant to shocks and pressure
Recommended for:
-
automotive industry and telecommunications
-
used in power supplies and LED systems
Availability:
-
available in tubes or containers for easy application
-
allows easy dosing
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPutty 1700NS | Feature (unit) | Test Method | UniPutty 1700NS |
Colour | Visual | Gray | Dielectric strength (V/0.025mm) | ASTM D149 | 310 |
Temperature range (oC) | - | -40oC do 180oC | Dissipation factor 25oC for 1000Hz | ASTM D150 | 0.0025 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.7 | resistivity (Ω∙cm) | ASTM D257 | 2x1015 |
Volatile compounds at 200oC for 24 hours (%/Wt) | FTM-321 | 0 | Dielectric constant 25oC at 1000Hz | ASTM D150 | 5.0 |
Evaporation at 200oC for 24 hours (%/Wt) | FTM-321 | 0 | |||
Density in 25OC | ASTMD70 | 2.6 |
-
thermal conductivity 1.8W / mK
-
soft silicone paste with high adhesion
-
easy to apply
-
soft and tight, so it doesn't put pressure on the device
-
unique formula, provides excellent thermally conductive properties
-
Recommended for high power electronic components
-
LED systems and telecommunications devices
Availability:
-
available in tubes or containers for easy application
-
other types of packaging are available on customer's request
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPutty 1800 | Feature (unit) | Test Method | UniPutty 1800 |
Colour | Visual | szary | Dielectric strength (V/0.025mm) | ASTM D149 | 500 |
Max. Operating temperature (oC) | - | -40oC do 200oC | Viscosity (mPas) | Brookfielda | od 4 mln do 8 mln |
Thermal conductivity (W/mK) | ASTM D5470 | 1.8 | resistivity (Ω∙cm) | ASTM D2240 | 1014 |
Thermal resistance (oC/W) | ASTM D5470 | 1.7 | Density (g/m3) | - | 2.6 |
degassing CVCM (%) | ASTM E595 | 0.08 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
silicone thermal grease with thixotropic properties
-
thermal conductivity 2W / mK
-
can be applied in room conditions, but also heated to speed up the process.
-
sticky and thixotropic
-
shock and pressure resistant
-
high thermal conductivity
-
power devices in converters and power supplies
-
DSP signal processors
Availability:
- available in tubes or containers for easy application
- also available in collective containers
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | UniPutty 2000 | Feature (unit) | Test Method | UniGap 3000 |
Colour | Visual | slate | resistivity (Ω∙cm) | ASTM D2240 | 9.15 x 1012 |
Thermal conductivity (W/mK) | ASTM D5470 | 2.0 | Hardness | ASTM D2240 | 60 |
Viscosity | Brookfielda | 110 000 ÷140 000 | Fire Resistance | UL94 | V-0 |
Temperature range (oC) | - | -65oC do +200oC |
-
the basis is a thin metal foil that accelerates heat transfer between surfaces
-
no air gaps
-
non-electrically isolated connection
-
enables a simple and quick connection to a heat sink
-
high thermal conductivity
-
connecting power supplies or transducers to the heat sink
-
joining any metal surfaces
Availability:
-
standard thickness 0.16mm
-
roll length 33m
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | Bondline 200 | Feature (unit) | Test Method | Bondline 200 |
Colour | - | light gray | Inflammability | UL94 | HB |
Thermal conductivity (W/mK) | ASTM D5470 | 0.30 | Peel strength (N/mm) | ASTM 412 | >54 |
Thermal resistance (oC-cm2/W) | ASTM D2240 | 0.56 | Tensile strength (N/mm) | ASTM 412 | >370 |
Working temperature (oC) | doświadczalna | -20 do +150 | Elongation (%) | ASTM 412 | 8 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
self-adhesive double-sided tape with high thermal conductivity properties
-
provides electrical insulation
-
prevents the formation of air gaps, reducing thermal resistance
-
high dielectric strength
-
very thin (0.12mm) thanks to which it shows excellent thermal properties
-
connecting PCBs with a heat sink
-
power supplies and transducers
Availability:
-
strip thickness 0.12mm
-
roll length 30m, various widths available
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | Bondline 300 | Feature (unit) | Test Method | Bondline 300 |
Clour | - | jasnobrązowy | Inflammability | UL94 | HB |
Thermal conductivity (W/mK) | ASTM D5470 | 0.40 | Adhesion to steel (N/cm) | ASTM 412 | 3.25 |
Thermal resistance (oC-cm2/W) | ASTM D5470 | 0.10 | Breakdown voltage (VAC) | ASTM D149 | >6000 |
Operating temperature (oC) | Experimental | -20 do +150 |
-
thermally conductive tape, electrically insulated
-
allows for efficient heat flow between elements
-
fills air gaps, thus reducing thermal resistance
-
provides excellent adhesion for a wide range of materials
-
permanent connection of elements
-
high dielectric strength
-
simple application
-
connecting LED modules with a heat sink
-
connecting medium power components with a heat sink
-
standard thicknesses 0.15mm, 0.25mm, 0.5mm
-
roll length 30m and 50m
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | Bondline 700 | Feature (unit) | Test Method | Bondline 700 |
Colour | - | white | Inflammability | UL94 | V2 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.1 | Breakdown voltage (V) | ASTM D149 | >6000 |
Thermal resistance (oC-cm2/W) | ASTM D5470 | 3 | Tensile strength(kg/cm) | ASTM 412 | 0.15 |
Operating temperature (oC) | Experimental | -25 do +130 | Elongation (%) | ASTM 412 | 400 |
Note:
Each of the above-mentioned material can be adapted to the shapes required by the customer. For this purpose, please contact the technical department of DACPOL Sp. z o.o.
-
provides an electrically insulated connection
-
prevents the formation of air gaps
-
offers a quick and easy connection of LED lighting with a heat sink
-
high thermal conductivity
-
joining metal surfaces
-
attaching the heat sink to the LED lighting
-
attaching the heat sink to the power supply or transducer
-
standard thickness 0.2mm
-
possibility of ordering rolls of custom sizes
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test method | Bondline 1800 | Feature (unit) | Test Method | Bondline 1800 |
Colour | - | white | Breakdown voltage (V) | ASTM D149 | >4000 |
Thermal conductivity (W/mK) | ASTM D5470 | 1.80 | Maximum storage length | - | 12 months |
Thermal resistance (oC-cm2/W) | ASTM D5470 | 0.38 | |||
Operating temperature (oC) | Experimental | -20 do +120 |
- silicone based thermal adhesive
- thermal conductivity 2.0W / mK
- provides a strong and durable connection
- excellent thermally conductive and dielectric properties
- suitable even for delicate electronic components
- the curing speed depends on the temperature and the amount used
- small drops (1mm-2mm) can be applied with a gun, smaller gaps require the use of specialized equipment
- supplied as standard in containers or buckets
- can be stored for 12 months at a temperature below 5oC
Physical properties | Electrical and mechanical properties | ||||
---|---|---|---|---|---|
Feature (unit) | Test Method | BondPutty 2000 | Feature (unit) | Test Method | BondPutty 2000 |
Colour | - | Gray | Dielectric strength (V/mm) | ASTM D149 | >18000 |
Temperatura pracy (oC) | - | -45o do +210 | resistivity (Ω∙cm) | ASTM D257 | 3.4 x 1013 |
Thermal conductivity (W/mK) | ASTM D5470 | 2.0 | Percentage extension (%) | ASTM 412 | 103 |
Hardness | ASTM D2240-95 | 50 | Tensile strength (MPa) | ASTM 412 | 2.1 |
Viscosity (mPas) | Brookfielda | 140000 |
can be stored for 12 months at a temperature below 5oC