Juntas conductoras de silicona impresas debajo del conector.
Juntas conductoras de silicona impresas debajo del conector.

Las fotos son solo para fines informativos. Ver especificaciones de producto

please use latin characters

Fabricante: TC SHIELDING

Juntas conductoras de silicona impresas debajo del conector.

The technique of printing conductive elastomers is a novel and very cost effective method of producing gaskets when compared to conventional means. The printed process produces a highly selective deposit resulting in negligible wastage. Below are its major advantages:

  • Cost effective versus conventional gaskets, e.g., die cut from moulded or calendered
    sheet.
  • Printed raised beads improve stress contact in lightly loaded flanges on hardware.
  • The gasket can be printed onto a conductive carrier (e.g., metal or plastic) to ease
    assembly.
  • Component hardware (e.g., panels, covers, providing the surface the gasket is to be
    located on is flat), can have the gasket printed direct onto the relevant surface, greatly
    improving assembly.
  • Secondary environmental sealing can be incorporated into the gasket.
 

Comparative properties

EcE Material Reference (Type) 3A 3B 3D 3G 31 3J 3A/1
Elastomer Type (Sil - Silicone) Sil Sil Sil Sil Sil Sil Sil
Filler Material Ag/Ni Ag/Cu Ag/Al Ag Ag/szkło Ag/Gr Al
Color Tan Tan Tan Tan Tan Grey Black
Electrical Properties
Volume Resistivity (ohm.cm) 5 5 8 5 5 5 12
Shielding Effectiveness (dB) 10 KHz 1 068 112 1 115 9 299 8 315 1 068 5 816
to
700 MHz 121 1 283 1 226 1 007 9 148 1 218 6 531
(Min/Max)
Shielding Effectiveness (dB)
200 KHz (H-Field)		 70 70 70 70 55 70 50
100 MHz (E-Field) 105 115 110 115 95 95 72
500 MHz (E-Field) 105 115 105 115 95 90 70
2 GHz (Plane Wave) 100 115 100 115 95 90 65
10 GHz (fala płaska) 100 115 100 115 95 90 65

EcE Material Reference (Type) 3A/1 3B/1 3D/1 31/1 3J/2 3K/1
Elastomer Type (Sil - Silicone) Sil Sil Sil Sil Sil Sil
Filler Material Ag/Ni Ag/Cu Ag/Al Ag/szkło Ni/Gr Al
Color Tan Tan Tan Tan Grey Black
Volume Resistivity (ohm.cm) 5 5 1 1 5 20
Shielding Effectiveness (dB) 10 KHz 9 082   9 815 8 699 8 699  
do
700 MHz 1 028   1 056 9 482 9 599  
(Min/Max)            
Shielding Effectiveness (dB)
200 KHz (H-Field)		 70 70 70 55 70 50

Pure Print Sub ‘D’ Connector Gaskets


No. of Contacts. TSC REF A
+/- 0,38 mm		 B
+/- 0,38 mm		 C
+/- 0,20 mm		 D
+/- 0,20 mm		 E
+/- 0,38 mm		 r
+/-0,20 mm		 R
+/- 0,20 mm
9 21 32,7 17,5 25 9,5 14 2 1,6
15 22 41 25,6 33,3 9,5 14 2 1,6
25 23 54,75 39,6 47,05 9,5 14 2 1,6
37 24 71,2 55,9 63,5 9,5 14 2 1,6
50 25 68,8 53 61,1 12 16,5 2 1,6

Order example

PA-XX-XXX

Example: PA – 3D – 021
PA – Printed
3D – Silver
021 – Shell Size
Gasket Aluminium/Silicone


Standard Miniature Sub ‘D’ Connector Gaskets (Flange Mounting)

Drukowane silikonowe uszczelki przewodzące pod złącza


No. of Contacts. TSC REF A
+/- 0,38 mm		 B
+/- 0,38 mm		 C
+/-0,08mm		 D
+/- 0,18 mm		 E
+/- 0,38 mm		 d
+/-0,12 mm		 Rad
r
9 1 30,81 20,45 25 11,34 14,91 3,12 3,56
15 2 39,14 28,57 33,3 11,34 14,91 3,12 3,56
25 3 53,03 42,29 47,05 11,34 14,91 3,12 3,56
37 4 69,32 58,8 63,48 11,34 14,91 3,12 3,56
50 5 66,93 56,64 61,14 14,23 17,83 3,12 3,56

Order example

PB-XX-XXX

Example: PB– 3A – 001
PB – Printed
3A – Silver
021 – Shell Size,
Gasket Aluminium/Silicone


Mil Spec Printed Back Shell Connector Gaskets

Drukowane silikonowe uszczelki przewodzące pod złącza


MIL-C-38999
Shell size TSC REF A+/-0,20 mm b+/-0,20 mm C+/-0,25 mm d+/-0,15mm E+/-0,20 mm f+/-0,20 mm
8 1 15,09 16,25 21,34 3,43 7 20,75
9+10 2 18,26 19,3 24,51 3,43 7 23,8
11+12 3 20,62 22,48 26,92 3,58 7,5 26,98
13+14 4 23,01 25,78 29,29 3,43 7 30,28
15+16 5 24,61 29,05 31,95 3,96 7,5 33,55
17+18 6 26,97 32,25 34,32 3,96 7,5 36,75
19+20 7 29,36 35,18 38,1 3,58 7,5 39,68
21+22 8 31,75 38,35 41,28 3,58 7,5 42,85
23+24 9 34,93 41,53 44,45 4,37 8 46,03
25 10 38,1 44,7 47,63 4,37 8 49,2
MIL-C-5015/26482
8 11 15,09 12,95 22,23 3,96 7,5 17,45
10 12 18,26 16,08 25,4 3,96 7,5 20,58
12 13 20,65 19,3 27,79 3,58 7 23,8
14 14 23,01 22,48 30,18 3,96 7,5 26,98
16 15 24,61 25,65 32,54 3,96 7,5 30,15
18 16 26,97 29,08 34,93 3,96 7,5 33,58
20 17 29,36 32 38,1 4,37 8 36,5
22 18 31,75 35,18 41,28 4,37 8 39,68
24 19 34,93 38,35 44,45 5,16 9 42,85

MIL-C-5015
Shell size TSC REF A+/-0,20 mm b+/-0,20 mm C+/-0,25 mm d+/-0,15mm E+/-0,20 mm f+/-0,20 mm
28 20 39,67 44,7 50,8 5,16 9 49,2
32 21 44,45 51,05 57,15 5,56 9,5 55,55
36 22 49,23 57,4 63,5 5,56 9,5 61,9
40 23 55,58 63,75 69,85 5,56 9,5 68,25
44 24 60,33 70,89 76,2 5,56 9,5 75,39
48 25 66,68 77,24 82,55 5,56 9,5 81,74
MIL-C-81511
8 26 15,09 14,68 20,62 3,18 7 19,18
10 27 18,26 17,52 23,8 3,18 7 22,02
14 28 23,01 24,08 28,58 3,18 7 28,58
16 29 24,61 27,25 31,75 3,18 7 31,75
18 30 26,97 30,45 34,11 3,18 7 34,95
20 31 29,36 33,57 37,26 3,18 7 38,07
22 32 31,75 36,75 39,67 3,18 7 41,25
24 33 34,93 39,95 43,26 3,86 7 44,45
NON-MIL-STANDARD CONNECTOR GASKETS
17 34 26,97 29 34,93 3,58 7,5 33,5

Order example

PD-XX-XXX
Example: PD– 3D – 001

PD – Printed
3D – Silver
001 – Shell Size

Menos
Lee mas

Envíe una consulta

¿Estás interesado en este producto? ¿Necesita información adicional o precios individuales?

Contacta con nosotras
SOLICITA EL PRODUCTO close
Gracias por enviar tu mensaje. Responderemos lo antes posible.
SOLICITA EL PRODUCTO close
Vistazo
enviar una consulta

Añadir a la lista de deseos

Usted debe estar conectado

The technique of printing conductive elastomers is a novel and very cost effective method of producing gaskets when compared to conventional means. The printed process produces a highly selective deposit resulting in negligible wastage. Below are its major advantages:

  • Cost effective versus conventional gaskets, e.g., die cut from moulded or calendered
    sheet.
  • Printed raised beads improve stress contact in lightly loaded flanges on hardware.
  • The gasket can be printed onto a conductive carrier (e.g., metal or plastic) to ease
    assembly.
  • Component hardware (e.g., panels, covers, providing the surface the gasket is to be
    located on is flat), can have the gasket printed direct onto the relevant surface, greatly
    improving assembly.
  • Secondary environmental sealing can be incorporated into the gasket.
 

Comparative properties

EcE Material Reference (Type) 3A 3B 3D 3G 31 3J 3A/1
Elastomer Type (Sil - Silicone) Sil Sil Sil Sil Sil Sil Sil
Filler Material Ag/Ni Ag/Cu Ag/Al Ag Ag/szkło Ag/Gr Al
Color Tan Tan Tan Tan Tan Grey Black
Electrical Properties
Volume Resistivity (ohm.cm) 5 5 8 5 5 5 12
Shielding Effectiveness (dB) 10 KHz 1 068 112 1 115 9 299 8 315 1 068 5 816
to
700 MHz 121 1 283 1 226 1 007 9 148 1 218 6 531
(Min/Max)
Shielding Effectiveness (dB)
200 KHz (H-Field)		 70 70 70 70 55 70 50
100 MHz (E-Field) 105 115 110 115 95 95 72
500 MHz (E-Field) 105 115 105 115 95 90 70
2 GHz (Plane Wave) 100 115 100 115 95 90 65
10 GHz (fala płaska) 100 115 100 115 95 90 65

EcE Material Reference (Type) 3A/1 3B/1 3D/1 31/1 3J/2 3K/1
Elastomer Type (Sil - Silicone) Sil Sil Sil Sil Sil Sil
Filler Material Ag/Ni Ag/Cu Ag/Al Ag/szkło Ni/Gr Al
Color Tan Tan Tan Tan Grey Black
Volume Resistivity (ohm.cm) 5 5 1 1 5 20
Shielding Effectiveness (dB) 10 KHz 9 082   9 815 8 699 8 699  
do
700 MHz 1 028   1 056 9 482 9 599  
(Min/Max)            
Shielding Effectiveness (dB)
200 KHz (H-Field)		 70 70 70 55 70 50

Pure Print Sub ‘D’ Connector Gaskets


No. of Contacts. TSC REF A
+/- 0,38 mm		 B
+/- 0,38 mm		 C
+/- 0,20 mm		 D
+/- 0,20 mm		 E
+/- 0,38 mm		 r
+/-0,20 mm		 R
+/- 0,20 mm
9 21 32,7 17,5 25 9,5 14 2 1,6
15 22 41 25,6 33,3 9,5 14 2 1,6
25 23 54,75 39,6 47,05 9,5 14 2 1,6
37 24 71,2 55,9 63,5 9,5 14 2 1,6
50 25 68,8 53 61,1 12 16,5 2 1,6

Order example

PA-XX-XXX

Example: PA – 3D – 021
PA – Printed
3D – Silver
021 – Shell Size
Gasket Aluminium/Silicone


Standard Miniature Sub ‘D’ Connector Gaskets (Flange Mounting)

Drukowane silikonowe uszczelki przewodzące pod złącza


No. of Contacts. TSC REF A
+/- 0,38 mm		 B
+/- 0,38 mm		 C
+/-0,08mm		 D
+/- 0,18 mm		 E
+/- 0,38 mm		 d
+/-0,12 mm		 Rad
r
9 1 30,81 20,45 25 11,34 14,91 3,12 3,56
15 2 39,14 28,57 33,3 11,34 14,91 3,12 3,56
25 3 53,03 42,29 47,05 11,34 14,91 3,12 3,56
37 4 69,32 58,8 63,48 11,34 14,91 3,12 3,56
50 5 66,93 56,64 61,14 14,23 17,83 3,12 3,56

Order example

PB-XX-XXX

Example: PB– 3A – 001
PB – Printed
3A – Silver
021 – Shell Size,
Gasket Aluminium/Silicone


Mil Spec Printed Back Shell Connector Gaskets

Drukowane silikonowe uszczelki przewodzące pod złącza


MIL-C-38999
Shell size TSC REF A+/-0,20 mm b+/-0,20 mm C+/-0,25 mm d+/-0,15mm E+/-0,20 mm f+/-0,20 mm
8 1 15,09 16,25 21,34 3,43 7 20,75
9+10 2 18,26 19,3 24,51 3,43 7 23,8
11+12 3 20,62 22,48 26,92 3,58 7,5 26,98
13+14 4 23,01 25,78 29,29 3,43 7 30,28
15+16 5 24,61 29,05 31,95 3,96 7,5 33,55
17+18 6 26,97 32,25 34,32 3,96 7,5 36,75
19+20 7 29,36 35,18 38,1 3,58 7,5 39,68
21+22 8 31,75 38,35 41,28 3,58 7,5 42,85
23+24 9 34,93 41,53 44,45 4,37 8 46,03
25 10 38,1 44,7 47,63 4,37 8 49,2
MIL-C-5015/26482
8 11 15,09 12,95 22,23 3,96 7,5 17,45
10 12 18,26 16,08 25,4 3,96 7,5 20,58
12 13 20,65 19,3 27,79 3,58 7 23,8
14 14 23,01 22,48 30,18 3,96 7,5 26,98
16 15 24,61 25,65 32,54 3,96 7,5 30,15
18 16 26,97 29,08 34,93 3,96 7,5 33,58
20 17 29,36 32 38,1 4,37 8 36,5
22 18 31,75 35,18 41,28 4,37 8 39,68
24 19 34,93 38,35 44,45 5,16 9 42,85

MIL-C-5015
Shell size TSC REF A+/-0,20 mm b+/-0,20 mm C+/-0,25 mm d+/-0,15mm E+/-0,20 mm f+/-0,20 mm
28 20 39,67 44,7 50,8 5,16 9 49,2
32 21 44,45 51,05 57,15 5,56 9,5 55,55
36 22 49,23 57,4 63,5 5,56 9,5 61,9
40 23 55,58 63,75 69,85 5,56 9,5 68,25
44 24 60,33 70,89 76,2 5,56 9,5 75,39
48 25 66,68 77,24 82,55 5,56 9,5 81,74
MIL-C-81511
8 26 15,09 14,68 20,62 3,18 7 19,18
10 27 18,26 17,52 23,8 3,18 7 22,02
14 28 23,01 24,08 28,58 3,18 7 28,58
16 29 24,61 27,25 31,75 3,18 7 31,75
18 30 26,97 30,45 34,11 3,18 7 34,95
20 31 29,36 33,57 37,26 3,18 7 38,07
22 32 31,75 36,75 39,67 3,18 7 41,25
24 33 34,93 39,95 43,26 3,86 7 44,45
NON-MIL-STANDARD CONNECTOR GASKETS
17 34 26,97 29 34,93 3,58 7,5 33,5

Order example

PD-XX-XXX
Example: PD– 3D – 001

PD – Printed
3D – Silver
001 – Shell Size

Menos
Lee mas
Comentarios (0)