

Musisz być zalogowany/a
Kategória
A fényképek csak tájékoztató jellegűek. Lásd a termék specifikációit
Kérjük, használjon latin karaktereket
The AB1-D3 pushbutton is used to control machines and systems in potentially explosive atmospheres – Zone 1/2 and Zone 21/22.
The high IP protection rating and corrosion-resistant stainless steel housing guarantee a long service life, even in aggressive environmental conditions. Thanks to its exceptionally flat design and rounded edges, this pushbutton offers a small surface area exposed to mechanical damage and dirt buildup.
CONNECT and ACT – Thanks to its approval as a device, the pushbutton can be mounted on the front of a machine in an Ex zone without the need for additional certification. The shallow mounting depth allows for particularly space-saving installation.
The button has also been tested for installation in certified control panels with Ex e and Ex t protection types.
The scope of delivery includes a plastic cap and colored labels (inserts) in red, yellow, green, white, and black.
Category | Parameter | Value |
---|---|---|
Explosion-proof | Protection type | II 2G Ex db eb IIC T6 Gb II 2D Ex tb IIIC T85°C Db |
Certificate | IBExU 22 ATEX 1083 X | |
Ambient temperature | –20 °C ... +60 °C | |
Electrical data | Operating voltage | 230 VAC / 24 VDC (dual insulation) |
Current consumption | max. 1 A | |
Electrical Life | 6.0 E + 03 (230 VAC 1A) 5.0 E + 04 (30 VDC 1A) |
|
Type AB1-D3-03* | Cable | 3 × 0.5 mm² (Oliflex 100) / Ø 5.4 mm |
Electrical connections | ||
(1) brown = COM (2) black = NC (3) gray = NO |
||
Type AB1-D3-06* | Cable | 6 × 0.5 mm² / Ø 6.9 mm |
Electrical Connections | ||
(1) brown + (4) blue = COM (2) black + (5) white = NC (3) gray + (6) orange = NO |
||
Mechanical Data | Housing Material | Stainless Steel 1.4305 |
Mechanical Lifespan | 1.0 E + 08 Switching Cycles | |
Sealing | EPDM | |
Protection level | IP 65 | |
Impact resistance | 7 Nm | |
Mounting hole | 22.0 … 22.3 mm / M22 × 1.5 | |
Tightening torque | 8 Nm | |
Mounting wall thickness | 1.0 … 15.0 mm | |
Logistics data | 150 g (1.5 m) | |
Tariff code (HS code) | 8536 5007 |
Érdekel ez a termék? További információra vagy egyedi árajánlatra van szüksége?
Musisz być zalogowany/a
The AB1-D3 pushbutton is used to control machines and systems in potentially explosive atmospheres – Zone 1/2 and Zone 21/22.
The high IP protection rating and corrosion-resistant stainless steel housing guarantee a long service life, even in aggressive environmental conditions. Thanks to its exceptionally flat design and rounded edges, this pushbutton offers a small surface area exposed to mechanical damage and dirt buildup.
CONNECT and ACT – Thanks to its approval as a device, the pushbutton can be mounted on the front of a machine in an Ex zone without the need for additional certification. The shallow mounting depth allows for particularly space-saving installation.
The button has also been tested for installation in certified control panels with Ex e and Ex t protection types.
The scope of delivery includes a plastic cap and colored labels (inserts) in red, yellow, green, white, and black.
Category | Parameter | Value |
---|---|---|
Explosion-proof | Protection type | II 2G Ex db eb IIC T6 Gb II 2D Ex tb IIIC T85°C Db |
Certificate | IBExU 22 ATEX 1083 X | |
Ambient temperature | –20 °C ... +60 °C | |
Electrical data | Operating voltage | 230 VAC / 24 VDC (dual insulation) |
Current consumption | max. 1 A | |
Electrical Life | 6.0 E + 03 (230 VAC 1A) 5.0 E + 04 (30 VDC 1A) |
|
Type AB1-D3-03* | Cable | 3 × 0.5 mm² (Oliflex 100) / Ø 5.4 mm |
Electrical connections | ||
(1) brown = COM (2) black = NC (3) gray = NO |
||
Type AB1-D3-06* | Cable | 6 × 0.5 mm² / Ø 6.9 mm |
Electrical Connections | ||
(1) brown + (4) blue = COM (2) black + (5) white = NC (3) gray + (6) orange = NO |
||
Mechanical Data | Housing Material | Stainless Steel 1.4305 |
Mechanical Lifespan | 1.0 E + 08 Switching Cycles | |
Sealing | EPDM | |
Protection level | IP 65 | |
Impact resistance | 7 Nm | |
Mounting hole | 22.0 … 22.3 mm / M22 × 1.5 | |
Tightening torque | 8 Nm | |
Mounting wall thickness | 1.0 … 15.0 mm | |
Logistics data | 150 g (1.5 m) | |
Tariff code (HS code) | 8536 5007 |
A megfogalmazott véleményedet nem lehet elküldeni
Hozzászólás jelentése
Jelentés elküldve
Jelentésed beküldése nem lehetséges
Írd meg véleményedet
Vélemény elküldve
Véleményed nem lehet elküldeni