Sie müssen eingeloggt sein
-
zurückX
-
Komponenten
-
-
Category
-
Halbleiter
- Dioden
- Thyristoren
-
Elektroisolierte Module
- Elektroisolierte Module | VISHAY (IR)
- Elektroisolierte Module | INFINEON (EUPEC)
- Elektroisolierte Module | Semikron
- Elektroisolierte Module | POWEREX
- Elektroisolierte Module IXYS
- Elektroisolierte Module | POSEICO
- Elektroisolierte Module ABB
- Elektroisolierte Module | TECHSEM
- Gehen Sie zur Unterkategorie
- Brückengleichrichter
-
Transistoren
- Transistoren | GeneSiC
- SiC-MOSFET-Module | Mitsubishi
- SiC-MOSFET-Module | STARPOWER
- ABB SiC-MOSFET-Module
- IGBT-Module | MITSUBISHI
- Transistormodule | MITSUBISHI
- MOSFET-Module von MITSUBISHI
- Transistormodule | ABB
- IGBT-Module | POWEREX
- IGBT-Module | INFINEON (EUPEC)
- Halbleiterkomponente aus Siziliumkarbid
- Gehen Sie zur Unterkategorie
- Treiber
- Leistungsblöcke
- Gehen Sie zur Unterkategorie
-
Strom- und Spannungswandler von LEM
-
Stromwandler von LEM
- Stromwandler mit geschlossener Rückkopplungsschleife (C / L)
- Stromwandler mit offener Rückkopplungsschleife (O / L)
- Stromwandler mit unipolarer Spannung
- Wandler in der Eta-Technologie
- Hochgenaue Stromwandler der Serie LF xx10
- Stromwandler der Serie LH
- HOYS und HOYL - zur direkten Montage auf einer Leiterschiene
- Stromwandler in der SMD-Technologie der Serien GO-SME und GO-SMS
- AUTOMOBIL-Stromwandler
- Gehen Sie zur Unterkategorie
- Spannungswandler | LEM
- Wandler zum Schutz, zur Überwachung und Steuerung | LEM
- Split-Core-Wandler | LEM
- Präzisionsstromwandler | LEM
- Gehen Sie zur Unterkategorie
-
Stromwandler von LEM
-
Passive Elemente (Kondensatoren, Widerstände, Sicherungen, Filter)
- Widerstände
-
Sicherungen
- Miniatursicherungen für elektronische Schaltungen der Serien ABC und AGC
- Schnelle Röhrensicherungen
- Zeitverzögerungssicherungen mit GL / GG- und AM-Eigenschaften
- Ultraschnelle Sicherungseinsätze
- Britische und amerikanische schnelle Sicherungen
- Schnelle europäische Sicherungen
- Traktionssicherungen
- Hochspannungs-Sicherungseinsätze
- Gehen Sie zur Unterkategorie
-
Kondensatoren
- Kondensatoren für Motoren
- Elektrolytkondensator
- Island Filmkondensatoren
- Leistungskondensatoren
- Kondensatoren für Gleichstromkreise
- Kondensatoren zur Leistungskompensation
- Hochspannungskondensatoren
- Induktionsheizkondensatoren
- Impulskondensatoren
- DC LINK-Kondensatoren
- Kondensatoren für AC / DC-Schaltungen
- Gehen Sie zur Unterkategorie
- Entstörungsfilter
- Superkondensatoren
-
Überspannungsschutz
- Überspannungsableiter für HF-Anwendungen
- Überspannungsableiter für Bildverarbeitungssysteme
- Überspannungsableiter für Stromleitungen
- Überspannungsableiter für LED
- Überspannungsableiter für die Photovoltaik
- Überspannungsableiter für Wägesysteme
- Überspannungsableiter für den Feldbus
- Gehen Sie zur Unterkategorie
- Gehen Sie zur Unterkategorie
-
Relais und Schütze
- Theorie der Relais und Schütze
- Dreiphasen-Halbleiterrelais AC
- Halbleiterrelais DC
- Regler, Steuerungen und Zubehör
- Sanftstarter und Schaltschütze
- Elektromechanische Relais
- Schütze
- Drehschalter
-
Einphasen-Halbleiterrelais AC
- Einphasen-Wechselstrom-Halbleiterrelais, Serie 1 | D2425 | D2450
- Einphasige AC-Halbleiterrelais der Serien CWA und CWD
- Einphasen-Wechselstrom-Halbleiterrelais der Serien CMRA und CMRD
- Einphasen-Wechselstrom-Halbleiterrelais, PS-Serie
- Doppel- und Vierfach-Wechselstrom-Halbleiterrelais, Serie D24 D, TD24 Q, H12D48 D.
- 1-phasige Festkörperrelais, gn-Serie
- Einphasige Wechselstrom-Halbleiterrelais, Serie ckr
- Einphasen-Wechselstromrelais der ERDA- UND ERAA-SERIE für die DIN-Schiene
- Einphasige Wechselstromrelais für 150A Strom
- Doppelte Halbleiterrelais mit integriertem Kühlkörper für eine DIN-Schiene
- Gehen Sie zur Unterkategorie
- Einphasen-Halbleiterrelais AC für Leiterplatten
- Interface-Relais
- Gehen Sie zur Unterkategorie
- Induktive Komponente
- Radiatoren, Varistoren, Thermoschütze
- Ventilatoren
- Klimaanlagen, Ausrüstung für Schaltschränke, Industriekühler
-
Batterien, Ladegeräte, Pufferstromversorgungen und Wechselrichter
- Batterien, Ladegeräte - theoretische Beschreibung
- Lithium-Ionen-Batterien. Kundenspezifische Batterien. Batteriemanagementsystem (BMS)
- Batterien
- Ladegeräte und Zubehör
- USV-Notstromversorgung und Pufferstromversorgung
- Konverter und Zubehör für die Photovoltaik
- Energiespeicher
- Brennstoffzellen
- Lithium-Ionen-Batterien
- Gehen Sie zur Unterkategorie
-
Automation
- Grenzschalter, Microschalter
- Sensoren, Wandler
-
Pyrometer
- Infrarot-Temperatursensor, kabellos, wasserdicht, IR-TE-Serie
- Infrarot-Temperatursensor, kabellos, IR-TA-Serie
- Infrarot-Temperatursensor, kabellos, IR-H-Serie
- Ein schnelles stationäres Pyrometer in einem sehr kleinen IR-BA-Gehäuse
- Lichtleiter-Temperatursensoren, IR-FA-Serie
- Das stationäre Pyrometer der IR-BZ-Serie
- Gehen Sie zur Unterkategorie
- Zähler, Zeitrelais, Einbaumessgeräte
- Industrielle Schutzausrüstung
- Licht- und Signalentechnik
- Infrarot-Kamera
- LED-Anzeigen
- Taster, Schalter und Zubehör
-
Datenerfassung und Datenlogger
- Temperaturschreiber mit Display und Textdruck AL3000
- Digitale Temperaturschreiber mit LCD Display KR 2000-Serie
- Sicherheitstemperaturwächter KR 5000
- Temperatur / Feuchtigkeit Hand-Meter mit Datenlogger HN-CH-Serie
- Messdatenerfassung und Datenlogger Zubehör
- Kompakter Bildschirmschreiber 71VR1
- Sicherheitstemperaturwächter KR 3000-Serie
- PC-Datenerfassung R1M-Serie
- PC-Datenerfassung R2M-Serie
- PC-Datenerfassung, 12 universelle isolierte Eingänge, Typ RZMS-U9
- PC-Datenerfassung, 12 universelle isolierte Eingänge, USB, RZUS-Serie
- Gehen Sie zur Unterkategorie
- Steuerungen
- Gehen Sie zur Unterkategorie
-
Adern, Litzen, Schutzhüllen, Flexible Verbingungen
- Drähte
- Litzen
-
Kabel für spezielle Anwendungen
- Verlängerungskabel und Kompensations
- Kabel für Thermoelemente
- Die Verbindungsdrähte zu czyjnków PT
- Mehradrige Kabel Temp. -60 ° C bis + 1400 ° C
- SILICOUL Mittelspannungskabeln
- Zündkabel
- Heizleitungen
- Einadriges Temp. -60 ° C bis + 450 ° C
- Zugbegleiter
- Heizleitungen im Ex
- Gehen Sie zur Unterkategorie
- Schläuche
-
Geflochtene Kabel
- Zöpfe flach
- Zöpfen Runde
- Sehr flexible Geflecht - flach
- Sehr flexible Geflecht - Rund
- Kupfergeflecht zylindrischen
- Kupfergeflechtschirm und zylindrischer
- Flexible Massebänder
- Geflechte zylindrischen verzinkt und Edelstahl
- PVC-isolierte Kupferlitzen - Temperatur 85 ° C
- Flach geflochtene Aluminium
- Connection Kit - Zöpfe und Röhren
- Gehen Sie zur Unterkategorie
- Leitungen und Sonstiges für Traktion
- Crimpverbinder
- Flexible isolierte Kupferschienen
- Mehrschichte flexible Kupferschienen
- Kabelrohre, Kabelkanäle und Kabelführung
- Kabelschutzschlauchsysteme
- Gehen Sie zur Unterkategorie
- Alle Kategorien
-
Halbleiter
-
-
- Lieferanten
-
Applications
- AC- und DC-Antriebe (Wechselrichter)
- Ausrüstung für Verteilungs-, Steuerungs- und Telekommunikationsschränke
- Bergbau, Metallurgie und Gründung
- CNC-Werkzeugmaschinen
- HLK-Automatisierung
- Induktionsheizung
- Industrielle Automatisierung
- Industrielle Automatisierung
- Industrielle Schutzvorrichtungen
- Komponenten für explosionsgefährdete Bereiche (EX)
- Maschinen zum Tiefziehen von Kunststoffen
- Maschinen zum Trocknen und Verarbeiten von Holz
- Motoren und Transformatoren
- Schweißmaschinen und Schweißmaschinen
- Straßenbahn- und Bahntraktion
- Temperaturmessung und -regelung
- Temperaturmessung und -regelung
- USV- und Gleichrichtersysteme
-
Installation
-
-
Montaż urządzeń
- Schaltschränkebau
- Design und Montage von Schränken
- Installation von Stromversorgungssystemen
- Leistungselektronik Vorrichtungen
- Maschinen, die auf Bestellung gebaut werden
- F&E-Forschungs- und Entwicklungsarbeiten
-
Produktionsprozessen Messungsanlagen
- Dioden und Thyristoren Messungsanlagen
- Schaltungen Messungsanlagen
- Varistor- und Überspannungsableiter-Tester
- Messungsanlagen für Kfz-Sicherungen
- Qr Sperrverzögerungsladung Messungsanlagen
- FD-Serie Schaltungen Rotorentester
- Audit-Messungsanlagen der Fehlerstromschutzschalter
- Tester für Kalibrierung der Relais
- Anlage für Video Qualitätskontrollsysteme
- Hochstrom-Thyristorschalter
- Maschenbruch-Tester
- Gehen Sie zur Unterkategorie
- Alle Kategorien
-
-
-
Inductors
-
-
Modernizacja induktorów
- Reparatur gebrauchter Induktivitäten
- Modernisierung von Induktoren
-
Produktion neuer Induktoren
- Härten von Kurbelwellen
- Aushärten der Bandsägezähne
- Erwärmung der Elemente vor dem Verkleben
- Härtung von Laufbahnen von Radnabenlagern für Kraftfahrzeuge
- Härtung der Antriebsgetriebekomponenten
- Härten von Stufenwellen
- Erwärmung in Kontraktionsfugen
- Scan-Härtung
- Weichlöten
- Knüppelheizungen
- Gehen Sie zur Unterkategorie
- Wissensbasis
- Alle Kategorien
-
-
-
Induktionsgeräte
-
-
Urządzenia indukcyjne
-
Generatoren für Induktionserwärmung
-
Ambrell Induktionsheizgeneratoren
- Generatoren: Leistung 500 W, Frequenz 150-400 kHz
- Generatoren: Leistung 1.2 - 2.4 kW, Frequenz 150 - 400 kHz
- Generatoren: Leistung 4.2 - 10 kW, Frequenz 150 - 400 kHz
- Generatoren: Leistung 10 - 15 kW, Frequenz 50 - 150 kHz
- Generatoren: Leistung 30-45 kW, Frequenz 50-150 kHz
- Generatoren: Leistung 65-135 kW, Frequenz 50-150 kHz
- Generatoren: Leistung 180-270 kW, Frequenz 50-150 kHz
- Generatoren: Leistung 20-35-50 kW, Frequenz 15-45 kHz
- Generatoren: Leistung 75-150 kW, Frequenz 15-45 kHz
- Generatoren: Leistung 200-500 kW, Frequenz 15-45 kHz
- Generatoren: Leistung 20-50 kW, Frequenz 5-15 kHz
- Gehen Sie zur Unterkategorie
- Denki Kogyo Induktionsheizungsgeneratoren
-
JKZ Induktionsheizungsgeneratoren
- Generatoren der CX-Serie, Frequenz: 50-120 kHz, Leistung: 5-25 kW
- Generatoren der SWS-Serie, Frequenz: 15-30 kHz, Leistung: 25-260 kW
- Generatoren (Öfen) zum Formen und Schmieden der MFS-Serie, Frequenz: 0,5-10 kHz, Leistung: 80-500 kW
- MFS-Schmelzöfen, Frequenz: 0,5-10 kHz, Leistung: 70-200 kW
- Generatoren der UHT-Serie, Frequenz: 200-400 kHz, Leistung: 10-160 kW
- Gehen Sie zur Unterkategorie
- Lampengeneratoren für Induktionsheizung
- Himmelwerk Induktionsheizungsgeneratoren
- Gehen Sie zur Unterkategorie
-
Ambrell Induktionsheizgeneratoren
- Reparaturen und Modernisierung
- Peripheriegeräte
-
Applikationen
- Medizinische Anwendungen
- Automobilindustrie Applikationen
- Löten
- Hartlöten
- Hartlöten von Aluminium
- Löten von magnetischen Edelstahlwerkzeugen
- Präzisionslöten
- Löten unter Atmosphäre
- Löten von Kühlkörperkappen aus Messing und Stahl
- Löten von Sintercarbiden
- Löten der Kupferspitze und des Drahtes
- Gehen Sie zur Unterkategorie
- Wissensbasis
- Alle Kategorien
-
Generatoren für Induktionserwärmung
-
-
-
Service
-
- Kontakt
- Zobacz wszystkie kategorie
Fotos dienen nur zu Informationszwecken.
please use latin characters
The iTAG100 is an intrinsically safe version of the AeroScout T2 Tag and is the most advanced Wi-Fi based Active RFID tag on the market, from the company that originated the Wi-Fi tag industry. The iTAG100 is a small, long-life Wi-Fi based Active RFID device that can be placed on any asset, allowing the Extronics system to locate assets that are not Wi-Fi enabled.
Locates any high-value asset.
These small, rugged, battery-powered tags can be attached to people and to a variety of equipment, such as medical
devices, containers, manufacturing equipment and retail shopping carts. In addition, the Extronics system can locate standard
Wi-Fi clients such as laptops, PDAs and barcode scanners, without the need to tag these assets or introduce client software
Accurate Real-Time Location as well as sophisticated RFID Choke Point Detection.
The Extronics system uses multiple methods to determine accurate location. With the Extronics Exciter, the same system also enables
tags to be detected and reprogrammed as they pass through doorways, gates or other choke points.
Sophisticated Software Platform.
The system utilises the advanced MobileView software platform, which enables developers to leverage positioning data from iTAG100
Tags and other devices for enhanced business management tasks.
Indoor, outdoor and mixed operation.
The Extronics system is suitable for use in indoor, outdoor and mixed environments, from corporate offices to harsh industrial areas.
Multiple reader options.
Extronics tag messages can be received and processed by Extronics Location Receivers as well as standard Cisco Systems and Meru
wireless access points, keeping infrastructure costs low.
Specification
Range | Outdoor Range : Up to 200 metres (600 Feet) Indoor Range : Up to 60 metres (180 feet) |
Positioning Accuracy | Typically 5 metres but as low as 1 metre, dependant upon number of Access Points or Location Receivers and environment |
Dimensions | 62 x 40 x 17 mm |
Weight | 70 g |
Housing | UV resistant Ex Antistatic Polycarbonate |
Ingress Protection | IP 67 |
Housing Options | Call button or tamper proof housing |
Housing Mounting Options | Wrist strap, safety pin, clip, adhesive tape, Velcro, hanger and trailer mount. Includes multi-functional attachment plate |
Radio | 802.11b radio (2.4 GHz) [&] RFID low frequency receiver (125 KHz) |
Transmission Power | Up to +19dBm, approx 81mW with clear channel sensing function that avoids interference with wireless networks |
Programmability | Transmission level interval, from 64 msec to 3.5 hours, channel programming and wireless tag programming |
Ambient Temperature | -30oC do 75oC |
Relative humidity | 0 to 100%, condensing |
Power | EX approved 3.6V Lithium battery with solder tags (replaceable by competent personnel) |
Battery Life | Up to 4 years dependant on use and environment 3.75 years (transmission every 5 minutes) 3 years (transmission every minute) 2.33 years (transmission every 30 seconds) |
Compliance | Compliant with IEEE 802.11 standards |
Radio Certification |
FCC Part 15, sub part C class B, sub part B, EN 300-328, EN300-330, EN301-489, RSS 210 (Canada), |
Safety Certification | CE, cTUVus (EN 60950) |
ATEX Certification | II 1 G EEx ia IIB T4/T5/T6 II 1 G EEx ia IIC T4/T/5/T6 II 2 G EEx ia IIC T4/T5/T6 I M1 EEx ia |
FM Certification | Intrinsically Safe Class I, II, III Division 1, Groups A, B, C, D, E, F, G T4 T5 T6 Approval Number: 3028837 |
MSHA Certification | Approval No.23-A08006-0 |
Characteristic
Flexible Mounting and Usage Options
The iTAG100 enables the wire-less network infrastructure to locate any asset or person. The Tag's small size and weight and convenient form allow mounting even on very small or oddly-shaped assets. The Tag is supplied with a multifunctional attachment plate that supports a variety of mounting options, including wrist straps, safety pins to attach to clothing or belt/ pocket clips. Other industry-specific mounting accessories are available.
Long Battery Life
A powerful, replaceable battery provides up to 4 years of battery life. The Tag provides a report on the battery level for timely replacement. The iTAG100 can also be automatically activated or deactivated for conserving battery power.
Call Button Option
The call button feature adds the ability to define events according to a button pushed on the tag. This enables advanced functionality such as emergency reporting or parts
Tag Management
The iTAG100 can be pro-grammed via a wireless interface. The Tag Manager software allows for easy and efficient tag configuration, activation or deactivation and programming. The Tag Activator enables wireless batch programming of up to 50 tags at the same time.
Compatibility and Non-Interference
iTAG100’s are 802.11 compatible. The Tag's channel sensing techniques avoid interference with Wi-Fi networks. The use of the 2.4GHz frequency band at low power levels ensures no interference with other wireless equipment, making Extronics Tags safe for use with such sensitive equipment as medical devices in a hospital.
Tag Programmability and Storage
The iTAG100 can store up to 10 messages of 10 bytes each. These messages can either be pre-programmed by the Tag Manager software or programmed on the fly by an Extronics Exciter when a tag is in proximity.
Telemetry Functionality
Extronics Tags include a serial interface that enables data retrieval from host devices. The tags can be configured to retrieve data such as mileage, fuel and temperature from the host periodically, and to send that data wirelessly in addition to the location messages.
Rugged Performance
Extronics Tags are designed to handle tough work environments such as manufacturing and outdoor applications. The Tag enclosure is water-resistant and designed to withstand significant physical shocks and drops.
Advanced Features and Functionality
Using the Extronics Exciter, tag behaviour can be automatically modified as the tag passes through a choke point such as a doorway or gate. This includes turning tags on/off to conserve battery life, or changing tag transmission rates. In addition, a tamperproof housing upgrade prevents removal and ensures integrity of the device.
Variety of Mounting Options
The iTAG has multiple mounting options and can be provided with a suitable adapter depending on the asset geometry. As standard the tag is supplied for strap or clip mounting. A variety of types is shown below.
Motion Detector
The man down feature protects the safety of lone workers by sending an immediate alert when a person is not in motion for a certain amount of time.
Ordering Information
Description | Part Number |
---|---|
Intrinsically Safe Tag ATEX certified II 2G EEx ia IIC T4/T5/T6 |
iTAG100-1 |
Intrinsically Safe Tag ATEX certified II 1G EEx ia IIB T4/T5/T6 |
iTAG100-6 |
Intrinsically Safe Tag ATEX certified II 2G EEx ia IIC T4/T5/T6 with Call Button |
iTAG100-1-CB |
Intrinsically Safe Tag ATEX certified II 1G EEx ia IIB T4/T5/T6 with Call Button |
iTAG100-6-CB |
Intrinsically Safe Tag ATEX certified I M1 EEx ia I |
iTAG100-3 |
Intrinsically Safe Tag ATEX certified I M1 EEx ia I with Call Button |
iTAG100-3-CB |
Intrinsically Safe Tag MSHA certified |
iTAG100-MSHA |
Intrinsically Safe Tag MSHA certified with Call Button |
iTAG100-MSHA-CB |
Intrinsically Safe Tag FM Certified |
iTAG100-5 |
Intrinsically Safe Tag FM certified with Call Button |
iTAG100-5-CB |
Spare lithium battery for the iTAG100 Group II ATEX version |
iTAG100-B1-II |
Spare lithium battery for the iTAG100 Group II FM version |
iTAG100-B1-FM |
Spare lithium battery for the iTAG100 Group I ATEX and MSHA versions |
iTAG100-XL050F |
Senden Sie eine Anfrage
Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?
Kontaktiere uns
Sie müssen eingeloggt sein
The iTAG100 is an intrinsically safe version of the AeroScout T2 Tag and is the most advanced Wi-Fi based Active RFID tag on the market, from the company that originated the Wi-Fi tag industry. The iTAG100 is a small, long-life Wi-Fi based Active RFID device that can be placed on any asset, allowing the Extronics system to locate assets that are not Wi-Fi enabled.
Locates any high-value asset.
These small, rugged, battery-powered tags can be attached to people and to a variety of equipment, such as medical
devices, containers, manufacturing equipment and retail shopping carts. In addition, the Extronics system can locate standard
Wi-Fi clients such as laptops, PDAs and barcode scanners, without the need to tag these assets or introduce client software
Accurate Real-Time Location as well as sophisticated RFID Choke Point Detection.
The Extronics system uses multiple methods to determine accurate location. With the Extronics Exciter, the same system also enables
tags to be detected and reprogrammed as they pass through doorways, gates or other choke points.
Sophisticated Software Platform.
The system utilises the advanced MobileView software platform, which enables developers to leverage positioning data from iTAG100
Tags and other devices for enhanced business management tasks.
Indoor, outdoor and mixed operation.
The Extronics system is suitable for use in indoor, outdoor and mixed environments, from corporate offices to harsh industrial areas.
Multiple reader options.
Extronics tag messages can be received and processed by Extronics Location Receivers as well as standard Cisco Systems and Meru
wireless access points, keeping infrastructure costs low.
Specification
Range | Outdoor Range : Up to 200 metres (600 Feet) Indoor Range : Up to 60 metres (180 feet) |
Positioning Accuracy | Typically 5 metres but as low as 1 metre, dependant upon number of Access Points or Location Receivers and environment |
Dimensions | 62 x 40 x 17 mm |
Weight | 70 g |
Housing | UV resistant Ex Antistatic Polycarbonate |
Ingress Protection | IP 67 |
Housing Options | Call button or tamper proof housing |
Housing Mounting Options | Wrist strap, safety pin, clip, adhesive tape, Velcro, hanger and trailer mount. Includes multi-functional attachment plate |
Radio | 802.11b radio (2.4 GHz) [&] RFID low frequency receiver (125 KHz) |
Transmission Power | Up to +19dBm, approx 81mW with clear channel sensing function that avoids interference with wireless networks |
Programmability | Transmission level interval, from 64 msec to 3.5 hours, channel programming and wireless tag programming |
Ambient Temperature | -30oC do 75oC |
Relative humidity | 0 to 100%, condensing |
Power | EX approved 3.6V Lithium battery with solder tags (replaceable by competent personnel) |
Battery Life | Up to 4 years dependant on use and environment 3.75 years (transmission every 5 minutes) 3 years (transmission every minute) 2.33 years (transmission every 30 seconds) |
Compliance | Compliant with IEEE 802.11 standards |
Radio Certification |
FCC Part 15, sub part C class B, sub part B, EN 300-328, EN300-330, EN301-489, RSS 210 (Canada), |
Safety Certification | CE, cTUVus (EN 60950) |
ATEX Certification | II 1 G EEx ia IIB T4/T5/T6 II 1 G EEx ia IIC T4/T/5/T6 II 2 G EEx ia IIC T4/T5/T6 I M1 EEx ia |
FM Certification | Intrinsically Safe Class I, II, III Division 1, Groups A, B, C, D, E, F, G T4 T5 T6 Approval Number: 3028837 |
MSHA Certification | Approval No.23-A08006-0 |
Characteristic
Flexible Mounting and Usage Options
The iTAG100 enables the wire-less network infrastructure to locate any asset or person. The Tag's small size and weight and convenient form allow mounting even on very small or oddly-shaped assets. The Tag is supplied with a multifunctional attachment plate that supports a variety of mounting options, including wrist straps, safety pins to attach to clothing or belt/ pocket clips. Other industry-specific mounting accessories are available.
Long Battery Life
A powerful, replaceable battery provides up to 4 years of battery life. The Tag provides a report on the battery level for timely replacement. The iTAG100 can also be automatically activated or deactivated for conserving battery power.
Call Button Option
The call button feature adds the ability to define events according to a button pushed on the tag. This enables advanced functionality such as emergency reporting or parts
Tag Management
The iTAG100 can be pro-grammed via a wireless interface. The Tag Manager software allows for easy and efficient tag configuration, activation or deactivation and programming. The Tag Activator enables wireless batch programming of up to 50 tags at the same time.
Compatibility and Non-Interference
iTAG100’s are 802.11 compatible. The Tag's channel sensing techniques avoid interference with Wi-Fi networks. The use of the 2.4GHz frequency band at low power levels ensures no interference with other wireless equipment, making Extronics Tags safe for use with such sensitive equipment as medical devices in a hospital.
Tag Programmability and Storage
The iTAG100 can store up to 10 messages of 10 bytes each. These messages can either be pre-programmed by the Tag Manager software or programmed on the fly by an Extronics Exciter when a tag is in proximity.
Telemetry Functionality
Extronics Tags include a serial interface that enables data retrieval from host devices. The tags can be configured to retrieve data such as mileage, fuel and temperature from the host periodically, and to send that data wirelessly in addition to the location messages.
Rugged Performance
Extronics Tags are designed to handle tough work environments such as manufacturing and outdoor applications. The Tag enclosure is water-resistant and designed to withstand significant physical shocks and drops.
Advanced Features and Functionality
Using the Extronics Exciter, tag behaviour can be automatically modified as the tag passes through a choke point such as a doorway or gate. This includes turning tags on/off to conserve battery life, or changing tag transmission rates. In addition, a tamperproof housing upgrade prevents removal and ensures integrity of the device.
Variety of Mounting Options
The iTAG has multiple mounting options and can be provided with a suitable adapter depending on the asset geometry. As standard the tag is supplied for strap or clip mounting. A variety of types is shown below.
Motion Detector
The man down feature protects the safety of lone workers by sending an immediate alert when a person is not in motion for a certain amount of time.
Ordering Information
Description | Part Number |
---|---|
Intrinsically Safe Tag ATEX certified II 2G EEx ia IIC T4/T5/T6 |
iTAG100-1 |
Intrinsically Safe Tag ATEX certified II 1G EEx ia IIB T4/T5/T6 |
iTAG100-6 |
Intrinsically Safe Tag ATEX certified II 2G EEx ia IIC T4/T5/T6 with Call Button |
iTAG100-1-CB |
Intrinsically Safe Tag ATEX certified II 1G EEx ia IIB T4/T5/T6 with Call Button |
iTAG100-6-CB |
Intrinsically Safe Tag ATEX certified I M1 EEx ia I |
iTAG100-3 |
Intrinsically Safe Tag ATEX certified I M1 EEx ia I with Call Button |
iTAG100-3-CB |
Intrinsically Safe Tag MSHA certified |
iTAG100-MSHA |
Intrinsically Safe Tag MSHA certified with Call Button |
iTAG100-MSHA-CB |
Intrinsically Safe Tag FM Certified |
iTAG100-5 |
Intrinsically Safe Tag FM certified with Call Button |
iTAG100-5-CB |
Spare lithium battery for the iTAG100 Group II ATEX version |
iTAG100-B1-II |
Spare lithium battery for the iTAG100 Group II FM version |
iTAG100-B1-FM |
Spare lithium battery for the iTAG100 Group I ATEX and MSHA versions |
iTAG100-XL050F |