HOP 500-SB / SP1- und HOP 800-Serie-Wandler bis 2000-SB
  • HOP 500-SB / SP1- und HOP 800-Serie-Wandler bis 2000-SB

Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: LEM

HOP 500-SB / SP1- und HOP 800-Serie-Wandler bis 2000-SB

 

HOP 500-SB/SP1

HOP 800-SB

HOP 1000-SB

HOP 1500-SB

HOP 2000-SB

Primary nominal current rmsIPNSK 500A 800A 1000A 1500A 2000A
Primary current measuring range,IPMAX ±1000A ±1600A ±2000A ±3000A ±3000A

Mechanical characteristics
• General tolerance
± 1 mm
• Primary through hole
104 x 40 mm
• Busbar fastening or panel mounting
1 hole ø5,5 i 2 slot 5,5 x 30
• Panel mounting
4 holesy ø3,2
• Distance between holes axes
15 x 150 mm
• Secondary connection
MOLEX 5045-04AG

Remarks
VOUT is positive when IP flows in the direction of the arrow.
The return busbar and primary conductor elbow must be 
located at least at 2.5 x window length more far away from the transducer case.
Temperature of the primary busbar cannot exceed 90°C.
• Parametry dynamiczne są najlepsze gdy szyna pierwotna wypełnia całkowicie okno przetwornika
Dynamic performances are best with a primary busbar completely filling the primary aperture.
 

DImensions [mm]

LEM HOP

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns

FRAGEN SIE NACH DEM PRODUKT close
Nachricht erfolgreich gesendet.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

 

HOP 500-SB/SP1

HOP 800-SB

HOP 1000-SB

HOP 1500-SB

HOP 2000-SB

Primary nominal current rmsIPNSK 500A 800A 1000A 1500A 2000A
Primary current measuring range,IPMAX ±1000A ±1600A ±2000A ±3000A ±3000A

Mechanical characteristics
• General tolerance
± 1 mm
• Primary through hole
104 x 40 mm
• Busbar fastening or panel mounting
1 hole ø5,5 i 2 slot 5,5 x 30
• Panel mounting
4 holesy ø3,2
• Distance between holes axes
15 x 150 mm
• Secondary connection
MOLEX 5045-04AG

Remarks
VOUT is positive when IP flows in the direction of the arrow.
The return busbar and primary conductor elbow must be 
located at least at 2.5 x window length more far away from the transducer case.
Temperature of the primary busbar cannot exceed 90°C.
• Parametry dynamiczne są najlepsze gdy szyna pierwotna wypełnia całkowicie okno przetwornika
Dynamic performances are best with a primary busbar completely filling the primary aperture.
 

DImensions [mm]

LEM HOP