Halsglühen in einem kryogenen Aluminium-Dewar
Halsglühen in einem kryogenen Aluminium-Dewar

Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: Ambrell

Halsglühen in einem kryogenen Aluminium-Dewar

Annealing lip on aluminum cryogenic dewar


Objective: Annealing a 1” lip on aluminum cryogenic dewar* that has been work hardened during the process of spin forming.


Frequency: 303 kHz


Equipment:
  • Ambrell 3.5 kW induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor;
  • An induction heating coil designed and developed specifically for this application.

Material: Aluminum dewar, lip has a 3.24” (82.3mm) ID and is 0.05” (1.3mm) thick.


Temperature: 800 °F (427 °C)


Process:

A two turn helical coil is used to heat the lip on the cryogenic dewar. The dewar is placed in the coil and power is applied for 2 minutes to anneal the required 1” heat zone.


Benefits:
  • Hands-free heating that involves no operator skill for manufacturing;
  • Fast, controllable, accurate heating;
  • High efficiency, low energy cost;
  • Even distribution of heating;

* dewar is a glass or metal container for storing liquefied gases
Weniger
Weiterlesen

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns
FRAGEN SIE NACH DEM PRODUKT close
Vielen Dank für die Zusendung Ihrer Nachricht. Wir werden so schnell wie möglich antworten.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche
Senden Sie eine Anfrage

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

Annealing lip on aluminum cryogenic dewar


Objective: Annealing a 1” lip on aluminum cryogenic dewar* that has been work hardened during the process of spin forming.


Frequency: 303 kHz


Equipment:
  • Ambrell 3.5 kW induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor;
  • An induction heating coil designed and developed specifically for this application.

Material: Aluminum dewar, lip has a 3.24” (82.3mm) ID and is 0.05” (1.3mm) thick.


Temperature: 800 °F (427 °C)


Process:

A two turn helical coil is used to heat the lip on the cryogenic dewar. The dewar is placed in the coil and power is applied for 2 minutes to anneal the required 1” heat zone.


Benefits:
  • Hands-free heating that involves no operator skill for manufacturing;
  • Fast, controllable, accurate heating;
  • High efficiency, low energy cost;
  • Even distribution of heating;

* dewar is a glass or metal container for storing liquefied gases
Weniger
Weiterlesen
Kommentare (0)