Alkyd-Lack modifizierte eine Komponente EC 203 für Klasse F 155-Grad-Klassen
  • Alkyd-Lack modifizierte eine Komponente EC 203 für Klasse F 155-Grad-Klassen

Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: SEG

Alkyd-Lack modifizierte eine Komponente EC 203 für Klasse F 155-Grad-Klassen

Polymerisation in dryer.

Application:
- electro-technical equipment.
- transformers,
- hermetic motors.

Impregnation:
By immersion, by atmosphere pressure.
It is recommended to use impregnation cylindrical ladle from stainless steel or plastic mass. For exemple: for lacquer WE 203-70 , obtain viscosity 30 s ±10 s  by adding 200g of water and 100g of lacquer.
Water should be added progressively, and lacquer should be mechanically mixed.

Polymerisation:
- Preliminary heat up of the elements up to 60°C
- Immerse element until air bulbs stop showing.
- Rise temperature up to 95°C and stabilise.
- drying:3 - 4 hours @ 150°C or 1,3 hours. @ 180°C.

Storage requirements:
4 months in original and closed package, far away from the sun and heat source. 

Packing:
Containers 1, 5 and 30l.  or barrels 200 l.

Hygiene and protection
Lacquer is not toxic, delivered without label.

Characteristic Standards WE 203-50 WE 203-70
Chemical origins   Alkyd modified Alkyd modified
Thermal class   F155°C F155°C
pseudo-viscosity @ 23°C CPE 6 ISO 2431 35 s ±5 s 240 s ±40 s
density @20°C NFT30020 1,06 1,08
Ignition point - crucible closed NFT30050 52°C 44°C
Dry extract NSEG 00001 70% ±2% 70% ±2%
Colour   natural natural
Drying on a plate NSEG @150°C 20 min @ 150°C 20min
Diluent   water water
polymerisation   3 + 4 h @150°C 3 + 4 h @150°C
polymerisation   1 + 1,5 h @180°C 1 + 1,5 h @180°C
pH   8,5 ±1 8,5 ±1
Weniger
Weiterlesen

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns

FRAGEN SIE NACH DEM PRODUKT close
Nachricht erfolgreich gesendet.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

Polymerisation in dryer.

Application:
- electro-technical equipment.
- transformers,
- hermetic motors.

Impregnation:
By immersion, by atmosphere pressure.
It is recommended to use impregnation cylindrical ladle from stainless steel or plastic mass. For exemple: for lacquer WE 203-70 , obtain viscosity 30 s ±10 s  by adding 200g of water and 100g of lacquer.
Water should be added progressively, and lacquer should be mechanically mixed.

Polymerisation:
- Preliminary heat up of the elements up to 60°C
- Immerse element until air bulbs stop showing.
- Rise temperature up to 95°C and stabilise.
- drying:3 - 4 hours @ 150°C or 1,3 hours. @ 180°C.

Storage requirements:
4 months in original and closed package, far away from the sun and heat source. 

Packing:
Containers 1, 5 and 30l.  or barrels 200 l.

Hygiene and protection
Lacquer is not toxic, delivered without label.

Characteristic Standards WE 203-50 WE 203-70
Chemical origins   Alkyd modified Alkyd modified
Thermal class   F155°C F155°C
pseudo-viscosity @ 23°C CPE 6 ISO 2431 35 s ±5 s 240 s ±40 s
density @20°C NFT30020 1,06 1,08
Ignition point - crucible closed NFT30050 52°C 44°C
Dry extract NSEG 00001 70% ±2% 70% ±2%
Colour   natural natural
Drying on a plate NSEG @150°C 20 min @ 150°C 20min
Diluent   water water
polymerisation   3 + 4 h @150°C 3 + 4 h @150°C
polymerisation   1 + 1,5 h @180°C 1 + 1,5 h @180°C
pH   8,5 ±1 8,5 ±1
Weniger
Weiterlesen