Polyesterlack ungesättigt P721, Polymerisation im Trockner
  • Polyesterlack ungesättigt P721, Polymerisation im Trockner

Fotos dienen nur zu Informationszwecken.

please use latin characters

Hersteller: SEG

Polyesterlack ungesättigt P721, Polymerisation im Trockner

One component - for insulation class H 180°C.

Application:
-static and whirling electro technical material

Main characteristic:
  LacquerP721:
- it is a non saturated polyester resin with reactive one component monomer.
- it is in liquid condensation, as one component.
- it is easy to use
- it has good thermal resistance

Material impregnation:
By immersion, vacuum.

Polymerisation:
It is not necessary to remove diluent. Polymerization lasts 4 hour at 150C temperature.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing:
Containers 1-5, 30 and 200 l

Hygiene and protection:
It doesn't contain styrene.

Lacquer Standard P721
Chemical origins   Non saturated polyester
thermal class IEC216 [H] 180°C
viscosity 23°C CPE 6: ISO 2431 60 s
density @ 23°C NSEG 00 500 mPas
density @ 20°C NFT 30020 1.102
  [ISO 2811] >61°C
Colour:   natural[transparent yellow]
Gelation time 121°C± 1°C NSEG 0012 8 min. ± 1 min 30 s
Polymerisation   4 h. @ 150°C
sintering[ after polymerisation 4H/150°C] CEI 1033screw twist [helical coil]CEI 455 20°C>10daNprzy 180°C>2daN
Break down voltage [after polymerisation 4H/150°C]   500V
     
     
Weniger
Weiterlesen

Senden Sie eine Anfrage

Interessieren Sie sich für dieses Produkt? Benötigen Sie zusätzliche Informationen oder individuelle Preise?

Kontaktiere uns

FRAGEN SIE NACH DEM PRODUKT close
Nachricht erfolgreich gesendet.
FRAGEN SIE NACH DEM PRODUKT close
Durchsuche

Zur Wunschliste hinzufügen

Sie müssen eingeloggt sein

One component - for insulation class H 180°C.

Application:
-static and whirling electro technical material

Main characteristic:
  LacquerP721:
- it is a non saturated polyester resin with reactive one component monomer.
- it is in liquid condensation, as one component.
- it is easy to use
- it has good thermal resistance

Material impregnation:
By immersion, vacuum.

Polymerisation:
It is not necessary to remove diluent. Polymerization lasts 4 hour at 150C temperature.

Storage conditions:
6 months in original and closed package, far away from the sun and heat source.

Packing:
Containers 1-5, 30 and 200 l

Hygiene and protection:
It doesn't contain styrene.

Lacquer Standard P721
Chemical origins   Non saturated polyester
thermal class IEC216 [H] 180°C
viscosity 23°C CPE 6: ISO 2431 60 s
density @ 23°C NSEG 00 500 mPas
density @ 20°C NFT 30020 1.102
  [ISO 2811] >61°C
Colour:   natural[transparent yellow]
Gelation time 121°C± 1°C NSEG 0012 8 min. ± 1 min 30 s
Polymerisation   4 h. @ 150°C
sintering[ after polymerisation 4H/150°C] CEI 1033screw twist [helical coil]CEI 455 20°C>10daNprzy 180°C>2daN
Break down voltage [after polymerisation 4H/150°C]   500V
     
     
Weniger
Weiterlesen