TES-33 - Tester pojemości akumulatorów
  • TES-33 - Tester pojemości akumulatorów

Photos are for informational purposes only. View product specification

TES-33 - Accumulator capacity tester

TES-33 measures internal resistance and voltage on accumulators (NiMH,NiCd,Li-ion) terminals during open circuit. 
Resistance is measured with AC and 4 wires with their resistance compensation function.
Tester display allows to simultaneously measure and read internal resistance, voltage and temperature. 
Results can be compared with standard limits programmed in device memory, which allow for a quick evaluation of tester state(good, quite good, bad). Do pamięci testera można wprowadzić 99 zestawów danych komparatora.
Tester measures DC current with pincer attachment. It allows to measure charge and discharge current, and therefore to calculate accumulator capacity.

 
Properties
  • Internal resistance measurement 4mΩ ~ 400Ω (max resolution1µΩ)
  • DC voltage measurement 6V~60V with max resolution 1mV
  • DC current measurement up to 600A
  • Temperature measurement -20°C~+60°C with resolution 0,1 °C
  • Internal resistance measurement with 4 wire method.
  • Calculation of capacity left on the charge and discharge current measurement.
  • Zero compensation
  • Function HOLD and AUTO-HOLD (another stable measurement)COMPARATOR:memory of 99 sets of LO and HI for internal resistance, and HI for DC voltage. Accumulator state is displayed by colour LED green-PASS , LED yellow-WARNING , LED red-BAD
  • Acoustics singal for WARNING and BAD state
  • Manual register of 999 sets of data
  • Constant registration of 6000 set of dataZ
  • Optic interface RS 232 for PC connection
  • "OL" - over range signal
  • "—" -measurement errors indication
  • Automatic turn off
  • Real time clock
 
General data

Display LCD multifunction
Sampling 1,3 time/s
Operation environment 0°C~40°C, humidity
Storage -10°C~50°C, humidity . < 80%
Power supply 9V DC: 6 battery1,5V LR 06 (tester) 9V DC: 1 battery 9V 6F22
Current consumption 1,0VA
Constant operation time about 5,5 hours
Max operation height under 2000m
Dimensions 94x49x198mm (tester) [WxDxH] 69x31x193mm (attachment) [WxDxH]
Weight 530g (tester), 240g (attachment) -
Equipment Measure wires with terminals, measure wires with probes, 3092CP-attachmenet DC, plates for zero compensation, manual., battery:,AC power supply, RS 232 optic cable, software on CD
Electric specification

Tested accumulators NiMH,NiCd,Li-ion
Accumulator capacity 0~1200Ah
Internal resistance Test current frequency 4,000m/40,00m/400,0m/4,000/40,00/400,0Q 4mO: ±(3%ww ±20c); poz. ±(0,8%ww ±6c) 1kHz±30Hz
DC voltage 6,000/60,00V ±(0,1 %w ±6c)
Temperature -20,0°C~+60,0°C;±1,0°C
DC current 600,0A; ±(2,0%ww+2c)
Open circuit voltage 5V DC max
 

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us

ASK FOR THE PRODUCT close
Message sent successfully.
ASK FOR THE PRODUCT close
Browse

Add to Wishlist

You must be logged in

TES-33 measures internal resistance and voltage on accumulators (NiMH,NiCd,Li-ion) terminals during open circuit. 
Resistance is measured with AC and 4 wires with their resistance compensation function.
Tester display allows to simultaneously measure and read internal resistance, voltage and temperature. 
Results can be compared with standard limits programmed in device memory, which allow for a quick evaluation of tester state(good, quite good, bad). Do pamięci testera można wprowadzić 99 zestawów danych komparatora.
Tester measures DC current with pincer attachment. It allows to measure charge and discharge current, and therefore to calculate accumulator capacity.

 
Properties
  • Internal resistance measurement 4mΩ ~ 400Ω (max resolution1µΩ)
  • DC voltage measurement 6V~60V with max resolution 1mV
  • DC current measurement up to 600A
  • Temperature measurement -20°C~+60°C with resolution 0,1 °C
  • Internal resistance measurement with 4 wire method.
  • Calculation of capacity left on the charge and discharge current measurement.
  • Zero compensation
  • Function HOLD and AUTO-HOLD (another stable measurement)COMPARATOR:memory of 99 sets of LO and HI for internal resistance, and HI for DC voltage. Accumulator state is displayed by colour LED green-PASS , LED yellow-WARNING , LED red-BAD
  • Acoustics singal for WARNING and BAD state
  • Manual register of 999 sets of data
  • Constant registration of 6000 set of dataZ
  • Optic interface RS 232 for PC connection
  • "OL" - over range signal
  • "—" -measurement errors indication
  • Automatic turn off
  • Real time clock
 
General data

Display LCD multifunction
Sampling 1,3 time/s
Operation environment 0°C~40°C, humidity
Storage -10°C~50°C, humidity . < 80%
Power supply 9V DC: 6 battery1,5V LR 06 (tester) 9V DC: 1 battery 9V 6F22
Current consumption 1,0VA
Constant operation time about 5,5 hours
Max operation height under 2000m
Dimensions 94x49x198mm (tester) [WxDxH] 69x31x193mm (attachment) [WxDxH]
Weight 530g (tester), 240g (attachment) -
Equipment Measure wires with terminals, measure wires with probes, 3092CP-attachmenet DC, plates for zero compensation, manual., battery:,AC power supply, RS 232 optic cable, software on CD
Electric specification

Tested accumulators NiMH,NiCd,Li-ion
Accumulator capacity 0~1200Ah
Internal resistance Test current frequency 4,000m/40,00m/400,0m/4,000/40,00/400,0Q 4mO: ±(3%ww ±20c); poz. ±(0,8%ww ±6c) 1kHz±30Hz
DC voltage 6,000/60,00V ±(0,1 %w ±6c)
Temperature -20,0°C~+60,0°C;±1,0°C
DC current 600,0A; ±(2,0%ww+2c)
Open circuit voltage 5V DC max