Transformator TS1000
  • Transformator TS1000

Photos are for informational purposes only. View product specification

please use latin characters

Manufacturer: ZIEHL

TS1000 Trafosafe

The Trafosafe TS1000 is applied at transformers with forced cooling. It monitors the temperature of the transformer with 3 sensor-circuits (PTC-thermistors), controls the forced cooling depending on the load of the transformer, reports exceeding of alarm-temperature and switches off the transformer (trip) when increasing of the temperature continues.
Up to 6 fans can be controlled and monitored directly with the TS1000. Contactors and motor protection switches are not necessary any more. At Pt 100-monitored transformers the TS1000 can be used to control only the fans.

Temperature-Monitoring

• 1 PTC-circuit for controlling the cooling (1T1/1T2) = input for starting fan when using as fan-control only
• 2 x 1 PTC-circuit for alarm 1 (2T1/2T2) and alarm 2/trip (3T1/3T2), monitored for short-circuit and interruption
• Alarm1 (K2) in closed-circuit current mode = monitoring of function
• Alarm 2/trip (K3) in open-circuit current mode = no signal/tripping when switching on the device
• Test-/Reset-button for testing the function

Fan-Control and Monitoring of fan

• direct connection of up to 6 fans 0.07...4.0 A
• automatic exceeding of the on-time of the fans at high load of the transformer
• Monitoring of failure fan (over-/undercurrent)
• Self-calibration of the monitored values of the currents to the fans
• Switching-point for current-failure adjustable ± 5-40%
• automatic test of fans 1-30 days, disconnectable
• Relay for reporting fan-failure
• Clear displays with LEDs

General

• Universal Power Supply AC/DC 24-240 V
• compact housing for cabinet-mount, 140 mm wide, mounting heigt 55 mm
• Attachment on 35 mm standard rail or with 3 screws M4

T221660 24 V AC / DC



Technical data


Rated supply voltage Us AC/DC 24 - 240 V  0/45-120 Hz <2W <4 VA
Tolerance DC 20,4-297 V, AC 20-264 V
Connectable PTC-circuits 5 x 1...6 Pcs according to DIN VDE V 0898-1-401 (formerly DIN 44081/82)
Switching point < 4000 Ω
Output relays K2, K3, K4 3 x 1  change-over-contact (co)
Type of contact Type 2 (see general technical information)
Output relays 1-6 6 x 1 normally-open contact (no)
Rated current of fans 0.07...4.0 A
Test conditions see general technical information
Rated ambient temperature -20...+55 °C
Dimensions h x w x d Design V8: 90 x 140 x 58 [mm], mounting height 55 mm
Attachment on 35 mm DIN rail according to EN 60 715 or 3 screws M4 (option)
Protection Housing/Terminals IP30/IP20
Weight approx. 400 g

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us

ASK FOR THE PRODUCT close
Message sent successfully.
ASK FOR THE PRODUCT close
Browse

Add to Wishlist

You must be logged in

The Trafosafe TS1000 is applied at transformers with forced cooling. It monitors the temperature of the transformer with 3 sensor-circuits (PTC-thermistors), controls the forced cooling depending on the load of the transformer, reports exceeding of alarm-temperature and switches off the transformer (trip) when increasing of the temperature continues.
Up to 6 fans can be controlled and monitored directly with the TS1000. Contactors and motor protection switches are not necessary any more. At Pt 100-monitored transformers the TS1000 can be used to control only the fans.

Temperature-Monitoring

• 1 PTC-circuit for controlling the cooling (1T1/1T2) = input for starting fan when using as fan-control only
• 2 x 1 PTC-circuit for alarm 1 (2T1/2T2) and alarm 2/trip (3T1/3T2), monitored for short-circuit and interruption
• Alarm1 (K2) in closed-circuit current mode = monitoring of function
• Alarm 2/trip (K3) in open-circuit current mode = no signal/tripping when switching on the device
• Test-/Reset-button for testing the function

Fan-Control and Monitoring of fan

• direct connection of up to 6 fans 0.07...4.0 A
• automatic exceeding of the on-time of the fans at high load of the transformer
• Monitoring of failure fan (over-/undercurrent)
• Self-calibration of the monitored values of the currents to the fans
• Switching-point for current-failure adjustable ± 5-40%
• automatic test of fans 1-30 days, disconnectable
• Relay for reporting fan-failure
• Clear displays with LEDs

General

• Universal Power Supply AC/DC 24-240 V
• compact housing for cabinet-mount, 140 mm wide, mounting heigt 55 mm
• Attachment on 35 mm standard rail or with 3 screws M4

T221660 24 V AC / DC



Technical data


Rated supply voltage Us AC/DC 24 - 240 V  0/45-120 Hz <2W <4 VA
Tolerance DC 20,4-297 V, AC 20-264 V
Connectable PTC-circuits 5 x 1...6 Pcs according to DIN VDE V 0898-1-401 (formerly DIN 44081/82)
Switching point < 4000 Ω
Output relays K2, K3, K4 3 x 1  change-over-contact (co)
Type of contact Type 2 (see general technical information)
Output relays 1-6 6 x 1 normally-open contact (no)
Rated current of fans 0.07...4.0 A
Test conditions see general technical information
Rated ambient temperature -20...+55 °C
Dimensions h x w x d Design V8: 90 x 140 x 58 [mm], mounting height 55 mm
Attachment on 35 mm DIN rail according to EN 60 715 or 3 screws M4 (option)
Protection Housing/Terminals IP30/IP20
Weight approx. 400 g