Rotary - impulse transducers (encoders)
  • Rotary - impulse transducers (encoders)

Photos are for informational purposes only. View product specification

please use latin characters

Manufacturer: Scancon

Rotary - impulse transducers (encoders)

There are two types of encoders - incremental and absolute - they both operate differently.

Incremental encoder
- There are non transparent code bars on transparent rotor disk.
Because of disk turn there is a 0-1 light signal(light - dark), which is converted into a constant digital signal.
Measurement value is obtained by impulse adding in external electronic device. Maximum code bar quantity is 5000 and corresponding resolution is 360°/5000 this is. 4,3’.

Absolute encoder
- There is a digital code(usually Gray code) on the rotor disk.
Encoder resolution for 1 turn is 10, 12 lub 13 bits - disk therefore has 10, 12 or 13 circles with transparent and non transparent intervals, which are source of 0-1 signal (light - dark).

Encoders -Standard versions

Type SCA50 SCA58 SCH50I SCH50IF SCH50F SCH50B SCH50L
Mechanical parameters
Max speed[min-1] 12000 12000 3000 6000 12000 12000 6000
diameter shaft/hole [mm] 6/8/10 1/4"
/ 3/8"
6/6,35/8/10 10/12/14 10/12/14/15 6/8 6/8 6/8
Max. dimensions [mm] Ø50 x 49 Ø58 x 44(45) Ø50(75) x 38 Ø50(75) x 40 Ø50(57,5) x 34 Ø50(57,5) x 36 Ø50(57,5)x40
Max shaft load rad./axe [N] 20/20 20/20 50/50 50/50 20/20 20/20 20/20
Max. operation temperature [°C] -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85
Protection level IP 65 (IP 67) IP 65 (IP 67) IP 65 IP 65 IP 65 IP 65 IP 65
Max resolution[ppr] 12500 12500 12500 12500 12500 12500 12500
Electrical parameters
Output

With active load( type "totem pole")

Supply voltage [VDC]

4,5..30

Cable type

8 cables(0,14mm2) twisted in pairs/ shielded

Short circuit protection

Thermal switch off 155OC

Max impulse frequency [kHz]

300

Encoders - non standard versions
Versions Nano Micro Mini Stainless steel Industrial Heavy industry Wykonanie Ex
Type SC09 SCA18 SCH24 SCA50-SR SCA80 2RMHD 2REX-H-SR
Mechanical parameters
Max speed[min-1] 12000 12000 12000 6000 6000 3000 1500
diameter shaft/hole[mm] 2 4 2/3/4 6/8/10 10 15 10/12/14/15
Max dimensions[mm] 09 x 20 018 x 31 024 x 21.3   084 x 68
Max shaft load rad./axe [N] 20/20 20/20 20/20 20/20 50/100 250/250 50/50
Max operation temperature [°C] 0 ... 70 0 ... 70 -40 ... 80 -40 ... 80 -40 ... 80 -40 ... 80 -40 ... 80
Protection level IP 54 IP 50 IP 64 IP 67 IP 67 IP 65 IP 67
Max resolution[ppr] 1000 5000 5000 12500 12500 7500 12500
Electric parameters
Output with active load
(type "totem pole")
NPN open collector with active load
(type "totem pole")
Supply voltage [VDC] 5 ±10% 5 ±10% 4,5..30
Cable type   8 wire tape(0,14mm2) Cable
5-(0,14mm2)
or 8-wire
(0,05mm2)
shielded
8 wires(0,14mm2) twisted in pairs/ shielded cable 5-(0,14mm2) or 8-żyłowy
(0,05mm2)
8 wires (0,14mm2) twisted in pairs/ shielded
Short circuit protection

Thermal switch off at 155°C

Max impulse frequency [kHz] 200 200 200 300 300 200 300

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us

ASK FOR THE PRODUCT close
Message sent successfully.
ASK FOR THE PRODUCT close
Browse

Add to Wishlist

You must be logged in

There are two types of encoders - incremental and absolute - they both operate differently.

Incremental encoder
- There are non transparent code bars on transparent rotor disk.
Because of disk turn there is a 0-1 light signal(light - dark), which is converted into a constant digital signal.
Measurement value is obtained by impulse adding in external electronic device. Maximum code bar quantity is 5000 and corresponding resolution is 360°/5000 this is. 4,3’.

Absolute encoder
- There is a digital code(usually Gray code) on the rotor disk.
Encoder resolution for 1 turn is 10, 12 lub 13 bits - disk therefore has 10, 12 or 13 circles with transparent and non transparent intervals, which are source of 0-1 signal (light - dark).

Encoders -Standard versions

Type SCA50 SCA58 SCH50I SCH50IF SCH50F SCH50B SCH50L
Mechanical parameters
Max speed[min-1] 12000 12000 3000 6000 12000 12000 6000
diameter shaft/hole [mm] 6/8/10 1/4"
/ 3/8"
6/6,35/8/10 10/12/14 10/12/14/15 6/8 6/8 6/8
Max. dimensions [mm] Ø50 x 49 Ø58 x 44(45) Ø50(75) x 38 Ø50(75) x 40 Ø50(57,5) x 34 Ø50(57,5) x 36 Ø50(57,5)x40
Max shaft load rad./axe [N] 20/20 20/20 50/50 50/50 20/20 20/20 20/20
Max. operation temperature [°C] -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85 -40 ... 85
Protection level IP 65 (IP 67) IP 65 (IP 67) IP 65 IP 65 IP 65 IP 65 IP 65
Max resolution[ppr] 12500 12500 12500 12500 12500 12500 12500
Electrical parameters
Output

With active load( type "totem pole")

Supply voltage [VDC]

4,5..30

Cable type

8 cables(0,14mm2) twisted in pairs/ shielded

Short circuit protection

Thermal switch off 155OC

Max impulse frequency [kHz]

300

Encoders - non standard versions
Versions Nano Micro Mini Stainless steel Industrial Heavy industry Wykonanie Ex
Type SC09 SCA18 SCH24 SCA50-SR SCA80 2RMHD 2REX-H-SR
Mechanical parameters
Max speed[min-1] 12000 12000 12000 6000 6000 3000 1500
diameter shaft/hole[mm] 2 4 2/3/4 6/8/10 10 15 10/12/14/15
Max dimensions[mm] 09 x 20 018 x 31 024 x 21.3   084 x 68
Max shaft load rad./axe [N] 20/20 20/20 20/20 20/20 50/100 250/250 50/50
Max operation temperature [°C] 0 ... 70 0 ... 70 -40 ... 80 -40 ... 80 -40 ... 80 -40 ... 80 -40 ... 80
Protection level IP 54 IP 50 IP 64 IP 67 IP 67 IP 65 IP 67
Max resolution[ppr] 1000 5000 5000 12500 12500 7500 12500
Electric parameters
Output with active load
(type "totem pole")
NPN open collector with active load
(type "totem pole")
Supply voltage [VDC] 5 ±10% 5 ±10% 4,5..30
Cable type   8 wire tape(0,14mm2) Cable
5-(0,14mm2)
or 8-wire
(0,05mm2)
shielded
8 wires(0,14mm2) twisted in pairs/ shielded cable 5-(0,14mm2) or 8-żyłowy
(0,05mm2)
8 wires (0,14mm2) twisted in pairs/ shielded
Short circuit protection

Thermal switch off at 155°C

Max impulse frequency [kHz] 200 200 200 300 300 200 300