Category
Photos are for informational purposes only. View product specification
please use latin characters
Like its predecessors, the lamp weighs only about 100 grams and provides safe illumination in the work area.
The 6003 series offers not only a boost” mode—which temporarily increases the light output to 420 lumens—but also three signal lights for indicating status or communicating with co-workers.
The addition of glass fibers in the plastic provides very high load resistance.
Never before has a fixture been so light, compact, and durable. The lamp is used as a tool by professionals and can be considered specialized equipment.
The battery retains over 80% capacity even after 500 charge cycles under continuous load.
Pressing the button for 5 seconds activates boost mode for 30 seconds. Brightness increases to 420 lumens, allowing you to brightly illuminate the work area for a short period of time.
Holding the button for 3 seconds activates the signal light. It can be set to red, yellow, or green, or to flash. It allows for visual communication with the team or to warn of a hazard.
| Mode | Luminous Flux | Light Range | Lighting Time | Color Temperature | Special modes |
|---|---|---|---|---|---|
| POWER | 260 lm | 200 m | 2.5–10 h | 5000 K | Boost mode and signal light |
| PERFORMANCE | 70 lm | 55 m | 10–30 h | 5000 K | Boost mode and signal light |
Are you interested in this product? Do you need additional information or individual pricing?
Like its predecessors, the lamp weighs only about 100 grams and provides safe illumination in the work area.
The 6003 series offers not only a boost” mode—which temporarily increases the light output to 420 lumens—but also three signal lights for indicating status or communicating with co-workers.
The addition of glass fibers in the plastic provides very high load resistance.
Never before has a fixture been so light, compact, and durable. The lamp is used as a tool by professionals and can be considered specialized equipment.
The battery retains over 80% capacity even after 500 charge cycles under continuous load.
Pressing the button for 5 seconds activates boost mode for 30 seconds. Brightness increases to 420 lumens, allowing you to brightly illuminate the work area for a short period of time.
Holding the button for 3 seconds activates the signal light. It can be set to red, yellow, or green, or to flash. It allows for visual communication with the team or to warn of a hazard.
| Mode | Luminous Flux | Light Range | Lighting Time | Color Temperature | Special modes |
|---|---|---|---|---|---|
| POWER | 260 lm | 200 m | 2.5–10 h | 5000 K | Boost mode and signal light |
| PERFORMANCE | 70 lm | 55 m | 10–30 h | 5000 K | Boost mode and signal light |
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent