PRZEWODZĄCY WYPEŁNIACZ SZCZELIN I BEZSILIKONOWY USZCZELNIACZ GF-NCP
PRZEWODZĄCY WYPEŁNIACZ SZCZELIN I BEZSILIKONOWY USZCZELNIACZ GF-NCP

Photos are for informational purposes only. View product specification

please use latin characters

Manufacturer: Limitless Shielding

Conductive gap filler and silicone-free sealant GF-NCP

The conductive non-silicone sealant and gap filler is a polymer material similar to conductive silicone sealants, but because it is polymer-based, it is free from silicone. It can be painted and offers other advantages in various industries. It is designed for easy application to connectors, joints, or small gaps in sheet metal enclosures. It cures at room temperature, creating a highly conductive elastomeric seal that has good adhesion to most commonly used materials. Once fully cured, it helps prevent water ingress and enhances EMI shielding. The conductive sealant and gap filler offer excellent resistance to high temperatures and long-term aging. The fillers used in these materials ensure a reliable low-impedance connection between metal surfaces. Different fillers we can use help ensure good galvanic compatibility with various alloys in wet or humid environments.

Features and Benefits

  • Single-component compound
  • Paintable
  • Easy to use, no mixing required
  • Fillers suitable for your application are available
  • Excellent conductivity 0.010 ohm-cm
  • Moisture/air-cured polymer
  • Working time of approximately 30 minutes
  • Fast skin formation
  • Cure time of 24 hours
  • No pressure required during curing
  • Wide temperature range for product use
  • Non-corrosive or neutral curing mechanism
  • No corrosive by-products during curing that could damage the substrate
  • Medium paste viscosity
  • Easy to dispense, apply, and spread, can be used on ceiling and vertical surfaces
  • Minimal shrinkage, no need for permits or ventilation
  • Available in cartridges with capacities of 71 cm³, 170 cm³, and 310 cm³

Ordering Information

To determine the type and size of the required material, use the material code and container size as a suffix. For example, for a 310cc cartridge with nickel-graphite sealant, the part number will be “GFNCP 310”

Sealant Image

Technical Data

Material Code GF-NC
Color Dark Gray
Density 1.9 g/cm³
Hardness 780 Shore A
Volume Resistivity < 0.01 Ohm/cm
Adhesion >200 N/cm²
Damping 100MHz to 10GHz 70 - 110dB
Elongation 100%
Temperature Range -40 to 85°C
Recommended Bond Line Thickness < 0.25 mm

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us
ASK FOR THE PRODUCT close
Thank you for sending your message. We will respond as soon as possible.
ASK FOR THE PRODUCT close
Browse

Add to Wishlist

You must be logged in

The conductive non-silicone sealant and gap filler is a polymer material similar to conductive silicone sealants, but because it is polymer-based, it is free from silicone. It can be painted and offers other advantages in various industries. It is designed for easy application to connectors, joints, or small gaps in sheet metal enclosures. It cures at room temperature, creating a highly conductive elastomeric seal that has good adhesion to most commonly used materials. Once fully cured, it helps prevent water ingress and enhances EMI shielding. The conductive sealant and gap filler offer excellent resistance to high temperatures and long-term aging. The fillers used in these materials ensure a reliable low-impedance connection between metal surfaces. Different fillers we can use help ensure good galvanic compatibility with various alloys in wet or humid environments.

Features and Benefits

  • Single-component compound
  • Paintable
  • Easy to use, no mixing required
  • Fillers suitable for your application are available
  • Excellent conductivity 0.010 ohm-cm
  • Moisture/air-cured polymer
  • Working time of approximately 30 minutes
  • Fast skin formation
  • Cure time of 24 hours
  • No pressure required during curing
  • Wide temperature range for product use
  • Non-corrosive or neutral curing mechanism
  • No corrosive by-products during curing that could damage the substrate
  • Medium paste viscosity
  • Easy to dispense, apply, and spread, can be used on ceiling and vertical surfaces
  • Minimal shrinkage, no need for permits or ventilation
  • Available in cartridges with capacities of 71 cm³, 170 cm³, and 310 cm³

Ordering Information

To determine the type and size of the required material, use the material code and container size as a suffix. For example, for a 310cc cartridge with nickel-graphite sealant, the part number will be “GFNCP 310”

Sealant Image

Technical Data

Material Code GF-NC
Color Dark Gray
Density 1.9 g/cm³
Hardness 780 Shore A
Volume Resistivity < 0.01 Ohm/cm
Adhesion >200 N/cm²
Damping 100MHz to 10GHz 70 - 110dB
Elongation 100%
Temperature Range -40 to 85°C
Recommended Bond Line Thickness < 0.25 mm
Comments (0)