Serial RS232/RS422/RS485 port servers - ETHERNET - fiber - MEI - DIN bus -
Serial RS232/RS422/RS485 port servers - ETHERNET - fiber - MEI - DIN bus -

Photos are for informational purposes only. View product specification

please use latin characters

Manufacturer: B&B Electronics

Serial RS232/RS422/RS485 port servers - ETHERNET - fiber - MEI - DIN bus - VESR901/VESR902/VESR921/VESR922

Features
• Connect serial devices to Ethernet
• Direct IP, virtual COM port, or paired mode
• Ethernet pass-through port available
• Fiber Ethernet connectivity options
• Serial MEI [Message Exchange Interface] ports

Description
VLINX™ VESR 9xx industrial serial Ethernet servers allow you to gain control of network devices. If the device has a serial port, it can be monitored and controlled from anywhere on an Ethernet LAN or WAN. You can configure your device to run at peak performance without leaving your office. Troubleshooting can also be done from outside your local network, via the internet. The easy-to-use Vlinx™ Manager software gives you access to your entire facility without leaving your office. This includes device configuration, firmware updates, and device performance monitoring. Configuration changes can also be made via a browser or TELNET console. A range of fiber optic options allows for quick integration with existing networks. There's no need to purchase an additional media converter when you can choose from multimode SC/ST, 15km singlemode SC/ST, 40km singlemode SC/ST, or 80km singlemode SC/ST. VESR92x series servers also feature an additional RJ45 port with twisted copper wire, allowing you to connect another Ethernet device or PC workstation. This pass-through port functions largely like a switch without management features.
The test signal keeps the serial connection server connected to the network. If communication is lost, this feature will attempt to reconnect every five seconds until communication is restored. It is not necessary to manually reboot the device once communication is restored.
VESR9
X
Number of serial ports: 1=1 port, 2=2 ports
X
Number of Ethernet ports: 0 = 1 port, 2 = 2 ports
X
Serial connector for VESR92x models D = DB9, T = Terminal block Note: Models with one serial port have a DB9 connector and a terminal block (TB). You can connect either one. Unmarked item for these models.
-
X
Fiber Optic Cable Type M = Multimode, S = Singlemode Note: Not used with RJ45 twisted pair copper. On VESR92x models, the second Ethernet port is always an RJ45 port connected via twisted pair copper cable.
X
Fiber Optic Connector T = ST, C = SC Note: Not used with RJ45 twisted pair copper cable.
X
Fiber Optic Rated Range: 40 = 40 km, 80 = 80 km Note: Unlabeled on RJ45 models with twisted-pair copper and multimode fiber.

Ordering Information
Vlinx Serial Server: See the above marking scheme.

Specifications


Serial connection technology
RS-232
TD, RD, RTS, CTS, DTR, DSR, DTD, GND [ground]
RS-485 2-wire
Data A(-), Data B (+), Ground
RS-422/485 4-wire
TDA(-), TDB(+), RDA(-), RDB(+), Ground
Serial Connector
DB9M or removable terminal blocks
Transfer rate
Up to 230.4 Kbps
VESR9xx-Mx fiber optic technology
Wavetype/Wavelength
Multimode / 1310nm
Output Power
(-)19 to (-) 14 dBm
Reception sensitivity
~ (-) 32 dBm
Cable
62.5 / 125 μm
Connector
SC or ST
Range
2 km
VESR9xx-Sx
Wavetype/Wavelength
Single-mode / 1310 nm
Output Power
(-) 15 to (-) 8 dBm
Reception sensitivity
~ (-) 32 dBm
Cable
9 / 125 urn
Connector
SC or ST
Range
15 km
Source
VESR9xx-Sx40 fiber optic technology
Wavetype/Wavelength
Single-mode/1310 nm
Output Power
(-) 5 doO dBm
Reception sensitivity
~ (-) 34 dBm
Cable
9 / 125 urn
Connector
SC or ST
Range
40 km
VESR9xx-Sx80 fiber optic technology
Wavetype/Wavelength
Single-mode/1510 nm
Power output
(-) 5 to 0 dBm
Reception sensitivity
~ (-) 34 dBm
Cable
9 / 125 urn
Connector
SC or ST
Range
80 km
Power
External
Input Voltage.
10 to 48 VDC
Connector
Removable Terminal Block (12 to 28 AWG)


Power consumption
VESR90x
4.0 W
VESR92x
6.0W
Mechanical Specifications
LED Indicators
Serial Port, Ethernet Connection, Ready
Switches
Reset button
Dimensions
VESR90x-3.0x8.1x11.9cm
VESR92x-3.0x10.2x15.0cm
Casing
plastic, IP30, mounting on a 35mm DIN rail
Weight
VESR90x - 149.7 g
VESR92x - 204.1 g
Working environment
Temp. work
- 34 to 74 °C
Temp. Storage.
-34 to 74 °C
Operating Humidity
10 - 95% non-condensing.
Mean Time Between Failures:
VESR90x ~ 132309 hours
Mean Time Between Failures:
VESR92x ~ 102593 hours
Mean Time Between Failures Calculation Method
Reliability Prediction
Time Between Failures
based on part count
Network
Serial Connection Memory
8 KB per port
Memory Network
4 KB
Port IP Addresses
5300 - Clock and Configuration
Setting up in TCP mode (paired mode) 8888 - VESR 9xx Update
Network Communications
LAN
10/100 Mbps, auto-sensing 10BaseT or 100BaseTX
Network Layer Standards physical
Ethernet
IEEE 802.3 auto-discovery, 10BaseT and 100Base TX auto-MDI/MDX
Protocols
TCP, IPv4, UDP,
ARP, Telnet, HTTP 1.0, ICMP/PING, DHCP/BOOTP
IP Mode
Static, DHCP
TCP
User configures
Other
Connection Mode
Server, Client, VCOM, Para
Client Connection
After power on or data received
Searching
Automatic direct serial search. COM port and Ethernet or a specific IP address.
Diagnostics
Displaying the computer's IP, pinging, testing VCOM, saving the test configuration (readable text).
Firmware update.
Via Ethernet, via the browser user interface.
Software
Vlix Manager: Support for Windows 2000, 2003 Server, XP and Vista
Ethernet loop-through (VESR92x)
Standards
IEEE 802.3, 802.3u, 802.3x
Processing Type
802.3x full-duplex store and forward, non-blocking forward control
Forward Control
IEEE 802.3x forward control, reverse control
MAC Address Table
2k
Configuration Software
Compatible with Windows 2000, 2003 Server, XP, and Vista
Regulatory Compliance
Compliance
FCC, CE
Application Example

Direct IP Connection Mode
Allows applications using TCP/IP or UDP/IP sockets to communicate directly with devices.
Pairing
Pairing
Allows serial devices to communicate with each other by tunneling signals over the network.
Virtual COM Mode
Virtual COM Mode
Allows a PC to communicate with serial devices over the network as if they were connected to a physical COM port on the PC.
Less
Read more

Send an inquiry

Are you interested in this product? Do you need additional information or individual pricing?

Contact us
ASK FOR THE PRODUCT close
Thank you for sending your message. We will respond as soon as possible.
ASK FOR THE PRODUCT close
Browse
send an inquiry

Add to Wishlist

You must be logged in

Features
• Connect serial devices to Ethernet
• Direct IP, virtual COM port, or paired mode
• Ethernet pass-through port available
• Fiber Ethernet connectivity options
• Serial MEI [Message Exchange Interface] ports

Description
VLINX™ VESR 9xx industrial serial Ethernet servers allow you to gain control of network devices. If the device has a serial port, it can be monitored and controlled from anywhere on an Ethernet LAN or WAN. You can configure your device to run at peak performance without leaving your office. Troubleshooting can also be done from outside your local network, via the internet. The easy-to-use Vlinx™ Manager software gives you access to your entire facility without leaving your office. This includes device configuration, firmware updates, and device performance monitoring. Configuration changes can also be made via a browser or TELNET console. A range of fiber optic options allows for quick integration with existing networks. There's no need to purchase an additional media converter when you can choose from multimode SC/ST, 15km singlemode SC/ST, 40km singlemode SC/ST, or 80km singlemode SC/ST. VESR92x series servers also feature an additional RJ45 port with twisted copper wire, allowing you to connect another Ethernet device or PC workstation. This pass-through port functions largely like a switch without management features.
The test signal keeps the serial connection server connected to the network. If communication is lost, this feature will attempt to reconnect every five seconds until communication is restored. It is not necessary to manually reboot the device once communication is restored.
VESR9
X
Number of serial ports: 1=1 port, 2=2 ports
X
Number of Ethernet ports: 0 = 1 port, 2 = 2 ports
X
Serial connector for VESR92x models D = DB9, T = Terminal block Note: Models with one serial port have a DB9 connector and a terminal block (TB). You can connect either one. Unmarked item for these models.
-
X
Fiber Optic Cable Type M = Multimode, S = Singlemode Note: Not used with RJ45 twisted pair copper. On VESR92x models, the second Ethernet port is always an RJ45 port connected via twisted pair copper cable.
X
Fiber Optic Connector T = ST, C = SC Note: Not used with RJ45 twisted pair copper cable.
X
Fiber Optic Rated Range: 40 = 40 km, 80 = 80 km Note: Unlabeled on RJ45 models with twisted-pair copper and multimode fiber.

Ordering Information
Vlinx Serial Server: See the above marking scheme.

Specifications


Serial connection technology
RS-232
TD, RD, RTS, CTS, DTR, DSR, DTD, GND [ground]
RS-485 2-wire
Data A(-), Data B (+), Ground
RS-422/485 4-wire
TDA(-), TDB(+), RDA(-), RDB(+), Ground
Serial Connector
DB9M or removable terminal blocks
Transfer rate
Up to 230.4 Kbps
VESR9xx-Mx fiber optic technology
Wavetype/Wavelength
Multimode / 1310nm
Output Power
(-)19 to (-) 14 dBm
Reception sensitivity
~ (-) 32 dBm
Cable
62.5 / 125 μm
Connector
SC or ST
Range
2 km
VESR9xx-Sx
Wavetype/Wavelength
Single-mode / 1310 nm
Output Power
(-) 15 to (-) 8 dBm
Reception sensitivity
~ (-) 32 dBm
Cable
9 / 125 urn
Connector
SC or ST
Range
15 km
Source
VESR9xx-Sx40 fiber optic technology
Wavetype/Wavelength
Single-mode/1310 nm
Output Power
(-) 5 doO dBm
Reception sensitivity
~ (-) 34 dBm
Cable
9 / 125 urn
Connector
SC or ST
Range
40 km
VESR9xx-Sx80 fiber optic technology
Wavetype/Wavelength
Single-mode/1510 nm
Power output
(-) 5 to 0 dBm
Reception sensitivity
~ (-) 34 dBm
Cable
9 / 125 urn
Connector
SC or ST
Range
80 km
Power
External
Input Voltage.
10 to 48 VDC
Connector
Removable Terminal Block (12 to 28 AWG)


Power consumption
VESR90x
4.0 W
VESR92x
6.0W
Mechanical Specifications
LED Indicators
Serial Port, Ethernet Connection, Ready
Switches
Reset button
Dimensions
VESR90x-3.0x8.1x11.9cm
VESR92x-3.0x10.2x15.0cm
Casing
plastic, IP30, mounting on a 35mm DIN rail
Weight
VESR90x - 149.7 g
VESR92x - 204.1 g
Working environment
Temp. work
- 34 to 74 °C
Temp. Storage.
-34 to 74 °C
Operating Humidity
10 - 95% non-condensing.
Mean Time Between Failures:
VESR90x ~ 132309 hours
Mean Time Between Failures:
VESR92x ~ 102593 hours
Mean Time Between Failures Calculation Method
Reliability Prediction
Time Between Failures
based on part count
Network
Serial Connection Memory
8 KB per port
Memory Network
4 KB
Port IP Addresses
5300 - Clock and Configuration
Setting up in TCP mode (paired mode) 8888 - VESR 9xx Update
Network Communications
LAN
10/100 Mbps, auto-sensing 10BaseT or 100BaseTX
Network Layer Standards physical
Ethernet
IEEE 802.3 auto-discovery, 10BaseT and 100Base TX auto-MDI/MDX
Protocols
TCP, IPv4, UDP,
ARP, Telnet, HTTP 1.0, ICMP/PING, DHCP/BOOTP
IP Mode
Static, DHCP
TCP
User configures
Other
Connection Mode
Server, Client, VCOM, Para
Client Connection
After power on or data received
Searching
Automatic direct serial search. COM port and Ethernet or a specific IP address.
Diagnostics
Displaying the computer's IP, pinging, testing VCOM, saving the test configuration (readable text).
Firmware update.
Via Ethernet, via the browser user interface.
Software
Vlix Manager: Support for Windows 2000, 2003 Server, XP and Vista
Ethernet loop-through (VESR92x)
Standards
IEEE 802.3, 802.3u, 802.3x
Processing Type
802.3x full-duplex store and forward, non-blocking forward control
Forward Control
IEEE 802.3x forward control, reverse control
MAC Address Table
2k
Configuration Software
Compatible with Windows 2000, 2003 Server, XP, and Vista
Regulatory Compliance
Compliance
FCC, CE
Application Example

Direct IP Connection Mode
Allows applications using TCP/IP or UDP/IP sockets to communicate directly with devices.
Pairing
Pairing
Allows serial devices to communicate with each other by tunneling signals over the network.
Virtual COM Mode
Virtual COM Mode
Allows a PC to communicate with serial devices over the network as if they were connected to a physical COM port on the PC.
Less
Read more
Comments (0)